Form 10-K
Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

 

 

FORM 10-K

 

 

(Mark One)

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the Fiscal Year ended December 31, 2013

OR

 

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from                 to                 

Commission File Number: 001-36040

 

 

Fox Factory Holding Corp.

(Exact Name of Registrant as Specified in Its Charter)

 

 

 

Delaware   26-1647258

(State or Other Jurisdiction of

Incorporation or Organization)

 

(I.R.S. Employer

Identification No.)

915 Disc Drive

Scotts Valley, CA

  95066
(Address of Principal Executive Offices)   (Zip Code)

(831) 274-6500

(Registrant’s Telephone Number, Including Area Code)

Securities registered pursuant to Section 12(b) of the Act:

 

Title of Each Class

 

Name of Each Exchange on Which Registered

Common Stock, par value $0.001 per share  

The NASDAQ Stock Market LLC

(NASDAQ Global Select Market)

Securities registered pursuant to Section 12(g) of the Act:

None

 

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15 (d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer   ¨    Accelerated filer   ¨
Non-accelerated filer   x  (Do not check if a smaller reporting company)    Smaller reporting company   ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

As of June 30, 2013 (the last business day of the registrant’s most recently completed second fiscal quarter), there was no established public market for the registrant’s common stock. The registrant’s common stock began trading on the NASDAQ Global Select Market on August 8, 2013.

As of February 28, 2014, there were 36,433,658 shares of the Registrant’s common stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Registrant’s definitive Proxy Statement for the 2014 Annual Meeting of Stockholders to be filed with the Securities and Exchange Commission pursuant to Regulation 14A not later than 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K are incorporated by reference in Part III, Items 10-14 of this Annual Report on Form 10-K.

 

 

 


Table of Contents

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains forward-looking statements that involve substantial risks and uncertainties. The statements contained in this Annual Report on Form 10-K that are not purely historical are forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), including, but not limited to, statements regarding our expectations, beliefs, intentions, strategies, future operations, future financial position, future revenue, projected expenses and plans and objectives of management. In some cases, you can identify forward-looking statements by terms such as “anticipate,” “believe,” “estimate,” “expect,” “intend,” “may,” “might,” “plan,” “project,” “will,” “would,” “should,” “could,” “can,” “predict,” “potential,” “continue,” “objective,” or the negative of these terms, and similar expressions intended to identify forward-looking statements. However, not all forward-looking statements contain these identifying words. These forward-looking statements reflect our current views about future events and involve known risks, uncertainties and other factors that may cause our actual results, levels of activity, performance or achievement to be materially different from those expressed or implied by the forward-looking statements. Factors that could cause or contribute to such differences include, but are not limited to, those identified below, and those discussed in the section titled “Risk Factors” included in this Annual Report on Form 10-K. Furthermore, such forward-looking statements speak only as of the date of this report. Except as required by law, we undertake no obligation to update any forward-looking statements to reflect events or circumstances after the date of such statements. We qualify all of our forward-looking statements by these cautionary statements. In addition, the industry in which we operate is subject to a high degree of uncertainty and risk due to a variety of factors including those described in the section entitled “Risk Factors.” These and other factors could cause our results to differ materially from those expressed in this Annual Report on Form 10-K.


Table of Contents

Fax Factory Holding Corp.

FORM 10-K

Table of Contents

 

         Page  

PART I.

    

Item 1

 

Business

     1   

Item 1A

 

Risk Factors

     11   

Item 1B

 

Unresolved Staff Comments

     25   

Item 2

 

Properties

     25   

Item 3

 

Legal Proceedings

     25   

Item 4

 

Mine Safety Disclosures

     25   

PART II

    

Item 5

 

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

     26   

Item 6

 

Selected Financial Data

     28   

Item 7

 

Management’s Discussion and Analysis of Financial Condition and Results of Operations

     30   

Item 7A.

 

Quantitative and Qualitative Disclosures About Market Risk

     42   

Item 8

 

Financial Statements and Supplementary Data

     42   

Item 9

 

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

     43   

Item 9A

 

Controls and Procedures

     43   

Item 9B

 

Other Information

     43   

Part III

    

Item 10

 

Directors, Executive Officers and Corporate Governance

     44   

Item 11

 

Executive Compensation

     44   

Item 12

 

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

     44   

Item 13

 

Certain Relationships and Related Transactions, and Director Independence

     44   

Item 14

 

Principal Accountant Fees and Services

     44   

PART IV

    

Item 15

 

Exhibits, Financial Statement Schedules

     44   

Signatures

     45   

Financial Statements

  
 

Report of Independent Registered Public Accounting Firm

     F-1   
 

Consolidated Balance Sheets

     F-2   
 

Consolidated Statements of Income

     F-3   
 

Consolidated Statements of Comprehensive Income

     F-4   
 

Consolidated Statements of Stockholders’ Equity

     F-5   
 

Consolidated Statements of Cash Flows

     F-6   
 

Notes to Consolidated Financial Statements

     F-7   


Table of Contents

PART I

 

ITEM 1. BUSINESS

Our company, Fox Factory Holding Corp., designs, engineers, manufactures and markets high-performance suspension products for customers world-wide. Fox Factory Holding Corp. is the holding company of Fox Factory, Inc. As used herein, “Fox Factory,” “FOX,” the “Company,” “we,” “our,” and similar terms refer to Fox Factory Holding Corp. and its subsidiaries, unless the context indicates otherwise. Our premium brand suspension products are used primarily on mountain bikes, side-by-side vehicles (“Side-by-Sides”), on-road vehicles with off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, or ATVs, snowmobiles, specialty vehicles and applications, and motorcycles. Some of our products are specifically designed and marketed to some of the leading original equipment manufacturers (“OEMs”), while others are distributed directly to consumers through a global network of dealers and distributors. We were incorporated in Delaware on December 28, 2007 by Compass Group Diversified Holdings LLC, (our “Sponsor”). Our common stock is traded on the NASDAQ Global Select Market (the “NASDAQ”) under the symbol “FOXF.”

Our History

Robert C. Fox, Jr. began developing suspension products in 1974 when, having participated in motocross racing, he sought to create a racing suspension shock that performed better than existing coil spring shocks. Working in a friend’s garage, Mr. Fox created the “Fox AirShox.” The product was successful, and went into production in 1975. The next year, in 1976, Fox AirShox was used by the rider who won the AMA 500cc National Motocross Championship.

Sales of Fox AirShox grew rapidly and, in 1978, our operating subsidiary, Fox Factory, Inc., was incorporated in California. From 1978 to 1983, FOX suspension users won numerous major races including 500cc Grand Prix races (motocross), Baja 1000 races (off-road), AMA SuperBike races (motorcycle road racing), and the Indianapolis 500 race (auto racing), generating greater market awareness of the FOX brand among enthusiasts.

As FOX grew, we applied many of the same core suspension technologies developed for motocross racing to other categories. For example, in 1987 we started selling high-performance suspension products for snowmobiles. By 1991, we began supplying the mountain bike industry with rear shocks and we entered the ATV and other off-road vehicle markets in the mid-1990s. Starting in 2001, we began offering front fork suspension products for mountain bikes.

Our Sponsor purchased a controlling interest in us on January 4, 2008. As of December 31, 2013, they beneficially owned approximately 53.9% of our outstanding common stock.

Description of our Business

We are a designer, manufacturer and marketer of high-performance suspension products used primarily on mountain bikes, Side-by-Sides, on-road vehicles with off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, or ATVs, snowmobiles, specialty vehicles and applications, and motorcycles. We believe our products offer innovative design, performance, durability and reliability. Through our products we enhance ride dynamics, which we define as the interplay between the rider, the vehicle and the terrain, by improving performance and control. Our brand is associated with high-performance and technologically advanced products, by which we generally mean products that provide users with improved control and a smoother ride while riding over rough terrain in varied environments. We believe that the performance of our products has been demonstrated by, and our brand benefits from, the success of professional athletes who use our products in elite competitive events, such as the Union Cycliste Internationale Mountain Bike World Cup and the X Games. We believe the exposure our products receive when used by successful professional athletes positively influences the purchasing habits of enthusiasts and other consumers seeking high-performance products. We believe that our strategic focus on the performance and racing segments in our markets influences many aspiring and enthusiast consumers who we believe seek to emulate the performance of professional and other elite athletes. We believe our products are generally sold at premium prices, which to us means manufacturer suggested retail sale prices that are generally in the upper quartile of their respective product categories.

We design our products for, and market our products to, some of the world’s leading OEMs, in our markets, and to consumers through the aftermarket channel. Many of our OEM customers, including Giant, Scott, Specialized and Trek in mountain bikes and BRP, Ford and Polaris in powered vehicles, are among the market leaders in their respective product categories, and help shape, as well as respond to, consumer trends in their respective categories. We believe that OEMs often prominently display and incorporate our products to improve the marketability and consumer demand for their high-performance models, which reinforces our brand image. In addition, consumers select our products in the aftermarket channel where we market through a global network of dealers and distributors.

We have experienced strong sales and profit growth over the past few years. Our sales increased from approximately $197.7 million in 2011 to approximately $272.7 million in 2013. Over the same period, our net income increased from approximately $13.5 million to approximately $24.1 million.

For clarification, we are not affiliated with Fox Head, Inc., an action sports apparel company.

 

1


Table of Contents

Recent Developments

On March 5, 2014, we entered into a definitive agreement to acquire the business of Sport Truck USA (“Sport Truck”) a full service, globally recognized distributor, primarily of its own branded aftermarket suspension solutions and reseller of our products. Sport Truck also designs, markets, and distributes high quality lift kit solutions through their wholly owned subsidiaries BDS Suspension and Zone Offroad Products. The acquisition of Sport Truck is well-aligned with our mission of improving vehicle performance, delivering the best in-class service, and entering into strategic adjacent markets. We will acquire Sport Truck in an asset purchase transaction for approximately $44 million due at closing. The transaction is being financed with debt and includes a potential earn-out opportunity of up to a maximum of $29.3 million payable over the next three years contingent upon the achievement of certain performance based financial targets. The transaction is subject to approval by the employee stock ownership plan shareholders of Sport Truck and is also subject to customary closing conditions. The transaction is expected to close by the end of March 2014.

On February 24, 2014, we filed a Current Report on Form 8-K announcing that our board of directors approved the promotion of certain officers in connection with our newly formed strategic business development group.

Industry

We participate in the large global markets for mountain bikes and powered vehicles used by recreational and professional users. Today, our products for powered vehicles are used primarily on Side-by-Sides, on-road vehicles with off-road capabilities, off-road vehicles and trucks, ATVs, snowmobiles, specialty vehicles and applications, and motorcycles.

The markets in which we participate are diverse geographically and by product type. We focus on the premium priced products within each of these categories, and consider these premium priced products to be in the high-end segment because of their higher retail sale prices. We believe consumers in the high-end segment have a preference for well-designed, performance-oriented equipment. We believe that suspension systems are critical to the performance of the mountain bikes and powered vehicles in the product categories in which we focus and that technical features, component performance, product design, durability, reliability and brand recognition strongly influence the purchasing decisions of consumers. Over the past decade, there have been significant technological advances in materials and features that have increased product functionality and performance, allowing high-end suspension products to be adapted for use in additional end-markets, such as in the mountain bike and powered vehicle categories.

We believe the high-end segments in which we participate are well positioned for growth due to several factors, including:

 

    increasing average retail sales prices, which we believe are driven by differentiated and feature-rich products with advanced technologies;

 

    continuing product cycle innovation, which we have observed often motivates consumers to upgrade and purchase new products for enhanced performance;

 

    branded auto OEMs introducing on-road vehicles with off-road capabilities, such as the Ford F-150 SVT Raptor; and

 

    increased sales opportunities for high-end mountain bikes and powered vehicles in international markets.

As vehicles in our end-markets evolve and grow more capable, suspension products and components have become, and we believe will continue to become, increasingly more important for improved performance and control. Additionally, we believe there are opportunities to continue to leverage our technical know-how in suspension products to provide solutions beyond our current end-markets.

Our Competitive Strengths

Broad offering of high-performance products across multiple consumer markets

Our suspension products enhance ride dynamics across multiple consumer markets. Through the use of adjustable suspension, position sensitive damping, multiple air spring technologies, lightweight and rigid materials, and other technologies and methods, our products improve the performance and control of the vehicles used by our consumers. We believe our reputation for high-performance products is reinforced by the successful finishes in world class competitive events by athletes incorporating our products in their vehicles, including the following examples in 2013:

 

    three out of four Union Cycliste Internationale World Cup Mountain Bike Series titles;

 

    World Off Road Championship Series Side x Side Production 1000 Class Championship;

 

    American Motorcyclist Association, or AMA, Pro ATV Championship and first place finishes in 10 out of 10 races;

 

2


Table of Contents
    International Series of Champions National Pro Open Championship for snowmobiles and first place finishes in 16 out of 16 races; and

 

    two out of two overall Pro 2 Championships and first place finishes in 21 out of 29 Pro 2 races in the TORC and LOORRS off-road short course racing series.

Premium brand with strong consumer loyalty

We believe that we have developed a reputation for high-performance products and our trademarks, such as FOX ®, and FOX RACING SHOX ®, designate a premium brand, as our high-performance suspension products are generally sold at premium prices. Our FOX ® logo is prominently displayed on our products used on mountain bikes and powered vehicles sold by our OEM customers, which helps further reinforce our brand image. We believe that our brand has achieved strong loyalty from our consumers. To support our brand, we introduce new products that we believe feature innovative technologies designed to improve vehicle performance and enhance our brand loyalty with consumers.

Track record of innovation and new product introductions

Innovation, including new product development, is a key component of our growth strategy. Due to our experience in suspension engineering and design in multiple markets and with a variety of vehicles, we are able to bring unique ride dynamics solutions to our customers, often developed for use in one market and ultimately deployed across multiple markets. For example, our success in the high-end ATV category led to the widespread adoption of our suspension technology in the Side-by-Side market, which became our second largest product category by sales in 2012. Our innovative product development and speed to market are supported by:

 

    our racing culture, including on-site technical race support of professional athletes, which provides us with unique real-time insights as to the evolving ride dynamic needs of those participating in world-class events;

 

    ongoing research and development team of engineers and technicians focused on designing innovative products, testing, and developing engineering-based solutions to enhance our product offerings;

 

    feedback from professional athletes, race teams, enthusiasts and other consumers who use our products;

 

    strategic and collaborative relationships with OEM customers, which furthers our ability to extend technologies and applications across end-markets; and

 

    our integrated manufacturing facilities and performance testing center, which allow us to quickly move from concept to product.

During 2013, we launched more than 20 new products and generated more than 70% of our sales from products introduced by us during the last three years, such as the:

 

    Podium RC3, which provides external adjustment that allows the shock to easily be tuned for different rider skill, terrain, and racing type without having to be disassembled;

 

    Float X Evol, which allows the rider to tune the spring characteristics of the shock via an air pump without having to remove the shock;

 

    ECS Shock, which has an external cooling system that significantly lowers shock temperatures, allowing powered vehicles to operate at higher speeds for extended periods without sacrificing driver control, particularly in extreme environments; and

 

    Float iCD, which provides riders the ability to adjust modes for different skills, terrains and activity levels on mountain bikes, resulting in increased utilization of the modes and an overall more efficient ride dynamics experience.

Strategic brand for OEMs, dealers and distributors

Through our strategic relationships, we are often sought out by our OEM customers and work closely with them to develop and design new products and product enhancements. We believe our collaborative approach and product development processes strengthen our relationships with our OEM customers. We believe consumers value our branded suspension products when selecting high-performance mountain bikes and powered vehicles, and as a result, OEMs purchase and incorporate our products in their mountain bikes and powered vehicles in order to increase the sales of their premium priced products. In addition, we believe the inclusion of our products on high-end mountain bikes and powered vehicles reinforces our premium brand image which helps to drive our sales in the aftermarket channel where dealers and distributors sell our products to consumers.

 

3


Table of Contents

Experienced management team

We have an experienced senior management team led by Larry L. Enterline, our Chief Executive Officer. Collectively, our eight member senior management team has an average tenure at FOX of approximately eight years per person. In addition, many members of our management team and many of our employees are avid users of our products, which further extends their knowledge of, and expertise in, our products and end-markets. We are able to attract and retain highly trained and specialized employees who enhance our company culture and serve as strong brand advocates.

Our Strategy

Our goal is to expand our leadership position as a designer, manufacturer and marketer of high-performance products designed to enhance ride dynamics. As part of our strategic goals to expand and strengthen our position in the marketplace, we recently formalized a business development group to focus on inorganic and organic potential growth opportunities, for example, identify and assess possible acquisition opportunities, aid the business in analyzing growth alternatives and to manage select, critical projects and programs. We intend to focus on the following key strategies in pursuit of this goal:

Continue to develop new and innovative products in current end-markets

We intend to continue to develop and introduce new and innovative products in our current end-markets to improve ride dynamics for our consumers. For example, our patented position-sensitive damping systems provide terrain optimized ride characteristics across many of our product lines. We believe that high-performance and control are important to a large portion of our consumer base, and that our frequent introduction of products with innovative and improved technologies increases both OEM and aftermarket demand as consumers seek out products for their vehicles that can deliver these characteristics. We also believe evolving market trends, such as changing mountain bike wheel sizes and increasing adoption rates of Side-by-Side vehicles, should increase demand for vehicles in our end-markets, which, in turn, should increase demand for our suspension products.

Leverage technology and brand to expand into new categories and end-markets

We believe that we have a reputation as a leader in ride dynamics, and that our reputation combined with our ability to improve the performance of vehicles by incorporating high-performance suspension products, results in us often being approached by OEM product development teams, athletes and others looking to improve the performance of their vehicles, including in end-markets in which we have not previously offered products. We believe that our ride dynamics technologies have applications in end-markets in which we do not currently participate in a meaningful way, and we intend to selectively develop products for and forge relationships with customers in additional markets. These markets may include military, recreational vehicles (RVs), on-road motorcycles, commercial trucks and “performance street” cars. We also intend to evaluate selective potential acquisition opportunities for high-performance products and technologies that we believe will help us extend our ride dynamics platform.

Increase our aftermarket penetration

We currently have a broad aftermarket distribution network of more than 2,500 retail dealers and distributors worldwide. We intend to further penetrate the aftermarket channel by selectively adding dealers and distributors in certain geographic markets, increasing our internal sales force and strategically expanding aftermarket-specific products and services to existing vehicle platforms.

Accelerate international growth

While a significant percentage of our current sales are to OEMs and dealers and distributors located outside the United States, we believe international expansion represents a significant opportunity for us and we intend to selectively increase infrastructure investments and focus on identified geographic regions. We believe that rising consumer discretionary income in a number of developing markets and increasing consumer preferences for premium, high-performance mountain bikes and powered vehicles, should contribute to increasing demand for our products. In addition, we believe increasing international viewership of racing and extreme sports and other outdoor events, such as the X Games, is contributing to growing international participation in activities where our products are used. We intend to leverage our brand recognition to capitalize on these trends by increasing our sales to both OEMs and dealers and distributors globally, particularly in markets where we perceive significant opportunities. Our areas of greatest interest include Asia-Pacific (particularly China, South Korea and Australia) and South America (particularly Brazil, Argentina and Chile).

Improve operating and supply chain efficiencies

We intend to improve operating margins in the medium term by enhancing our design and production processes to increase efficiencies, reducing new product time to market and lowering production costs. Specifically, we are in the process of moving a majority of the manufacturing of our mountain bike products to Taiwan and intend to complete this process in 2015. We believe this transition to Taiwan, once completed, will shorten production lead times to our mountain bike OEM customers, improve supply chain efficiencies and reduce manufacturing costs.

 

4


Table of Contents

Our Products

We design and manufacture high-performance suspension products that dissipate the energy and force generated by mountain bikes and powered vehicles while they are in motion. A suspension product allows wheels or skis (in the case of snowmobiles) to move up and down to absorb bumps and shocks while maintaining contact with the ground for better control. Our products use adjustable suspension, position sensitive damping, multiple air spring technologies, low weight and structural rigidity, all of which improve user control for greater performance.

We use high-grade materials in our products and have developed a number of sophisticated assembly processes to maintain quality across all product lines. Our suspension products are assembled according to precise specifications throughout the assembly process to create consistently high performance levels and customer satisfaction.

Mountain bikes

In our mountain bike product category, we offer upper mid-end and high-end front fork and rear suspension products designed for cross-country, trail, all-mountain, free-ride and downhill riding. We also offer a ride-height adjustable seat post product, our D.O.S.S. remote adjustable seat post, which we introduced in 2012 to allow a rider to adjust his or her seat position for uphill, rolling trail or downhill riding without having to stop the mountain bike to adjust the seat. Our mountain bike products are sold in three series: (i) our Evolution series, designed for demanding, yet value-minded, enthusiasts; (ii) our Performance series, designed for experienced enthusiasts and expert riders; and (iii) our Factory series, which is designed for maximum performance at a professional level.

Powered vehicles

In our powered vehicle product category, we offer high-end suspension products for Side-by-Sides, on-road vehicles with off-road capabilities, off-road vehicles and trucks, ATVs, snowmobiles, specialty vehicles and applications, and motorcycles. Products for these vehicles are designed for trail riding, racing and performance. Our products have also been used on limited quantities of off-road military vehicles and other small-scale select military applications. Our products in the powered vehicle category range from two inch aluminum bolt-on shocks to our patented position sensitive internal bypass shocks.

Product Development

We are committed to the development and introduction of technologically advanced products that feature innovative designs and high-quality materials. We strive to maintain our product leadership through the introduction of new and innovative products and enhancements and refinements to our existing products. In 2013, we launched more than 20 new products, including our Float iCD fork and rear shock, 34 Factory FIT CTD fork, Dual Speed Compression module and our Bottom Out Cup position-sensitive damping module.

Research and Development

Research and development is at the core of our product innovation and market leadership strategy. We have a growing team of engineers and technicians focused on designing innovative products, testing, and developing engineering-based solutions to enhance our product offerings. In addition, a large number of our other employees, many of whom use our products in their recreational activities, contribute to our research and development and product innovation initiatives. Their involvement in the development of new products ranges from participating in initial brainstorming sessions to ride testing products in development. Product development also includes collaborating with OEM customers across end-markets, field testing by professional athletes and sponsored race teams and working with enthusiasts and other users of our products. This feedback helps us to develop innovative products which meet our demanding standards as well as the evolving needs of professional and recreational end users and to quickly commercialize these products.

Our research and development activities are supported by state-of-the-art engineering software design tools, integrated manufacturing facilities and a performance testing center equipped to enhance product safety, durability and high-performance. Our testing center collects data and tests products prior to and after commercial introduction. Suspension products undergo a variety of rigorous performance and accelerated life tests before they are introduced into the market. The research and development portion of our total engineering costs totaled approximately $10.4 million, $9.7 million and $9.8 million in 2013, 2012 and 2011, respectively.

Intellectual Property

Intellectual property is an important aspect of our business. We rely upon a combination of patents, trademarks, trade names, licensing arrangements, trade secrets, know-how and proprietary technology in order to secure and protect our intellectual property rights.

Our in-house counsel and external intellectual property resources diligently protect our new technologies with patents and trademarks and defend against patent infringement allegations. As of December 31, 2013, we owned 37 patents on proprietary technologies related to vehicle suspension and other products and had approximately 82 patent pending applications on file in the U.S. and

 

5


Table of Contents

European Patent Offices. Our principal intellectual property also includes our trademarks. We have more than 50 pending or registered trademarks in the U.S. and a number of international jurisdictions, including the marks FOX ®, FOX RACING SHOX ® and REDEFINE YOUR LIMITS ®. Although our intellectual property is important to our business operations and in the aggregate constitutes a valuable asset, we do not believe that any single patent, trademark or trade secret is critical to the success of our business as a whole. We cannot be certain that our patent applications will be issued or that any issued patents will provide us with any competitive advantages or will not be challenged by third parties.

In addition to the foregoing protections, we generally control access to and use of our proprietary and other confidential information through the use of internal and external controls, including contractual protections with employees, OEMs, distributors and others. Despite these protections, we may be unable to prevent third parties from using our intellectual property without our authorization, breaching any nondisclosure agreements with us, or independently developing products that are similar to ours, particularly in those countries where the laws do not protect our proprietary rights as fully as in the United States.

Seasonality

Our business is largely seasonal. In each of the last three fiscal years, our quarterly sales have been the lowest in the first quarter and the highest during our third quarter of the year. For example, our sales in our first and third quarters of 2013 represented 20% and 30% of our total sales for the year, respectively. We believe this seasonality is due to the delivery of new products, including our suspension products related to the new mountain bike season, during the late spring each year.

Practices Related to Working Capital Items

Information about the Company’s working capital practices is incorporated herein by reference to “Management’s Discussion and Analysis of Financial Condition” and “Results of Operations” in Part II, Item 7 and the “Consolidated Statement of Cash Flows” in Part II, Item 8 of this Form 10-K.

Customers

Our OEM customers include market leaders in their respective categories, and help define, as well as respond to, consumer trends in their respective industries. These OEM customers include our products on a number of their high-performance models. We believe OEMs often use our products to improve the marketability and demand of their own products, which, in turn, strengthens our brand image. In addition, consumers select our high-performance products in the aftermarket channel, where we market through a global network of dealers and distributors. We currently sell to more than 150 OEMs and distribute our products to more than 2,500 retail dealers and distributors worldwide. In 2013, 81% of our sales resulted from sales to OEM customers and 19% resulted from sales to dealers and distributors for resale in the aftermarket channel. No material portion of our business is subject to renegotiation of profits or termination of contracts or subcontracts at the election of the U.S. government.

Sales attributable to our 10 largest OEM customers, which can vary from year-to-year, collectively accounted for approximately 57%, 56% and 53% of our sales in 2013, 2012 and 2011, respectively.

Although we refer to the branded mountain bike OEMs that use our products throughout this document as “our customers,” “our OEM customers” or “our mountain bike OEM customers,” branded mountain bike OEMs often use contract manufacturers to manufacture and assemble their bikes. As a result, even though we typically negotiate price and volume requirements directly with our mountain bike OEM customers, it is the contract manufacturer that may place the purchase order and therefore assumes the responsible for paying us. Giant Bicycles, (“Giant”) is an OEM and a contract manufacturer used by certain of our mountain bike OEM customers. Sales to Giant accounted for approximately 17%, 13% and 12% of our sales in 2013, 2012 and 2011, respectively.

Our domestic sales totaled $96.1 million, $84.3 million and $65.8 million, or 35%, 36% and 33% of our total sales in 2013, 2012 and 2011, respectively. Our international sales totaled $176.6 million, $151.6 million and $132.0 million or 65%, 64% and 67% of our total sales in 2013, 2012 and 2011, respectively. Sales attributable to countries outside the United States are based on shipment location. Our international sales, however, do not necessarily reflect the location of the end users of our products, as many of our products are incorporated into mountain bikes that are assembled at international locations and then shipped back to the United States. Additional information about our product segment and certain geographic information is available in Note 14, Segment and Geographic Areas of the “Notes to Consolidated Financial Statements” in this Annual Report on Form 10-K.

Mountain bikes

We sell our mountain bike suspension products to more than 150 domestic and international bike OEMs, including Scott, Specialized and Trek. We have long-standing relationships with many of the top mountain bike OEMs. After incorporating our products on their mountain bikes, OEMs typically sell their mountain bikes to independent dealers, which then sell directly to consumers.

In the aftermarket, we typically sell to dealers in the U.S. and through distributors internationally. Our dealers sell directly to aftermarket consumers. Our overseas distributors sell to independent dealers, which then sell directly to consumers.

 

6


Table of Contents

Powered vehicles

We sell our suspension products for the powered vehicles industry to OEMs, including BRP, Ford and Polaris. We are also currently developing relationships with new OEMs, as the powered vehicles market continues to grow. After incorporating our products on their powered vehicles, OEMs typically sell their powered vehicles to independent dealers, which then sell directly to consumers.

In the aftermarket, we typically sell through dealers and distributors, both in the U.S. and internationally. Our dealers sell directly to aftermarket consumers. When we sell to our distributors, they sell to independent dealers, which then sell directly to consumers.

Our product offerings currently target high-performance suspension products for Side-by-Sides, on-road vehicles with off-road capabilities, off-road vehicles and trucks, ATVs, snowmobiles, specialty vehicles and applications, and motorcycles. Our products have also been used on limited quantities of off-road military vehicles and other small-scale select military applications.

Sales and Marketing

We employ a strong team of dedicated and specialized sales professionals. Each sales professional is fully committed to servicing our customers within our product categories, ensuring that our customers are in contact with capable and knowledgeable sales professionals to address their specific needs. We strongly believe that providing a high level of service to our end customers is essential to maintaining our reputational excellence in the marketplace. Our sales professionals receive training on the latest FOX products and technologies and attend trade shows to increase their market knowledge.

Our marketing strategy focuses on strengthening and promoting the FOX brand in the marketplace. We strategically focus our marketing efforts on enthusiasts seeking high-end suspension systems through promotions at destination riding locations and individual and team sponsorships. We believe that the performance of our products has been demonstrated by, and our brand benefits from, the success of professional athletes who use our products in elite competitive events, such as the Union Cycliste Internationale Mountain Bike World Cup and the X Games. We also believe these successes positively influence the purchasing habits of enthusiasts and other consumers seeking high-performance products. We believe that our strategic focus on the performance and racing segments in our markets influences many aspiring and enthusiast consumers and enables our products to be sold at premium price points. For example, we sponsor a number of professional athletes and professional race teams. In order to continue to enhance our brand image, we will need to maintain our position in the suspension products industry and to continue to provide high quality products and services. We have also been able to develop long-term strategic relationships with leading OEMs. Our reputation for high-performance suspension products plays a critical role in our aftermarket sales to consumers.

In addition to our website and traditional marketing channels, such as print advertising and tradeshows, we maintain an active social media presence, including a Facebook page, a YouTube channel, a Vimeo page and a Twitter feed to increase brand awareness, foster loyalty and build a community of users. As strategies and marketing plans are developed for our products, our internal marketing and communications group work to ensure brand cohesion and consistency.

Suppliers

The primary raw materials used in the production of our products are aluminum, magnesium and steel. We generally use multiple suppliers for our raw materials and believe that our raw materials are in adequate supply and available from many suppliers at competitive prices. Prices for our raw materials fluctuate from time to time, but historically, price fluctuations have not had a material impact on our business.

We work closely with our supply base, and depend upon certain suppliers to provide raw inputs, such as forgings, castings and molded polymers that have been optimized for weight, structural integrity, wear and cost. In certain circumstances, we depend upon a limited number of suppliers for such raw inputs. We typically have no firm contractual sourcing agreements with our suppliers other than purchase orders.

Miyaki is the exclusive producer of the Kashima coating for our suspension component tubes. As part of our agreement with Miyaki, which we entered into in 2009, or the (“Kashima Agreement”), we have been granted the exclusive right to use the trademark “KASHIMACOAT” on products comprising the aluminum finished parts for suspension components (e.g., tubes) and on related sales and marketing material worldwide, subject to a minimum model year order and certain other exclusions. The Kashima Agreement does not contain minimum purchase obligations.

Employees

As of December 31, 2013, we had approximately 670 full-time employees in the United States, Europe and Taiwan. We also use part-time employees at our manufacturing facilities to help us meet seasonal demands. None of our employees are subject to collective bargaining agreements. We have never experienced a material work stoppage or disruption to our business relating to employee matters. We believe that our relationship with our employees is good.

 

7


Table of Contents

Facilities

The following sets forth our principal facilities as of December 31, 2013. All of our principal facilities are leased.

 

Location

  

Principal uses

  

Approximate
sq. footage

Scotts Valley, California

   Corporate headquarters, sales, research and development    51,236

Scotts Valley, California

   Manufacturing    42,813

Watsonville, California

   Manufacturing and service    86,000

Watsonville, California

   Distribution and warehousing    12,947

El Cajon, California

   Manufacturing, sales, service, and research and development    30,152

Taichung, Taiwan

   Manufacturing and sales    28,000

Rodalben, Germany

   Distribution and service    10,059

Baxter, Minnesota

   Sales and service    9,333

Manufacturing

We manufacture and complete final assembly on our products. By controlling the manufacturing process of our products, we are able to maintain our strict quality standards, customize our machines and processes for the specific requirements of our products, and quickly respond to feedback we receive on our products in development and otherwise. Furthermore, manufacturing our own products enables us to adjust our labor and production inputs to meet seasonal demands and the customized requirements of some of our customers.

Although we currently manufacture most of our suspension products at our California facilities, we are in the process of transitioning the majority of our mountain bike products manufacturing operations to our new facility in Taichung, Taiwan, with the final completion of the transition scheduled for 2015. In connection with our transition, we expect to utilize suppliers who are located closer to our facility in Taichung, Taiwan for a number of materials and components. We currently have limited manufacturing operations at our Taiwan facility, where we presently manufacture our adjustable seat post and other select mountain bike products. During the transition period, we intend to manufacture mountain bike suspension products at both our facility in Watsonville, California and in Taichung, Taiwan, thereby providing us with dual manufacturing facilities and reducing the risk of interruptions. In addition, during the transition period, we intend to train certain of our Taichung employees at our Watsonville facility as a way to help us maintain our quality control. We believe that the orderly transition of the majority of our mountain bike manufacturing operations from California to our new facility in Taiwan should enable us to maintain our strict quality control standards, meet product demand requirements and relocate the majority of the manufacturing of our products for mountain bikes to a location that is geographically close to a number of our mountain bike OEMs, many of which are located in Taiwan. We estimate that our sales to mountain bike OEMs located in Taiwan represented approximately 50% of our total sales to mountain bike OEMs in the year ended December 31, 2013.

Once the transition of the majority of our mountain bike product manufacturing operations is complete, we anticipate converting the Watsonville facility primarily to the manufacturing of powered vehicle suspension products. We believe that this conversion process will help us to increase our manufacturing capacity for our powered vehicle products, which should help us to reduce our lead time to our powered vehicle OEMs.

We had approximately $22.4 million and $30.6 million in firm backlog orders at December 31, 2013 and 2012, respectively. The reduction in 2013 backlog, as compared to 2012, is largely due to change in our year-end production shut down which occurred in late December of fiscal 2012 and resulted in higher backlog as of year-end. This shut down did not recur in 2013.

 

8


Table of Contents

Competition

The markets for suspension products are highly competitive. We compete with other companies that produce suspension products for sale to OEMs, dealers and distributors, as well as with OEMs that produce their own line of suspension products for their own use. Some of our competitors may have greater financial, research and development or marketing resources than we do. Competition in the high-end segment of the suspension products market revolves around technical features, performance, product design, innovation, reliability and durability, brand, time to market, customer service and reliable order execution. While the pricing of competing products is always a factor, we believe the high-performance of our products helps justify our premium pricing. We compete with several large suspension providers and numerous small manufacturers that provide branded and unbranded products across all of our product lines. These competitors can be divided into the following categories:

Mountain bikes

Within the market for mountain bike suspension products, we compete with several companies that manufacture front and rear suspension products, including RockShox (a subsidiary of SRAM Corporation), X-Fusion Shox (a wholly-owned subsidiary of A-Pro), Manitou (a subsidiary of HB Performance Systems), SR Suntour, DT Swiss (a subsidiary of Vereinigte Drahtwerke AG) and Marzocchi (Tenneco), Cane Creek Cycling, DVO Suspension and Bos-Moutain Bike Suspensions.

Powered vehicles

Within the market for powered vehicle suspension products, we compete with several companies in different submarkets. We believe a significant competitor for suspension products in the snowmobile market is KYB (Kayaba Industry Co., Ltd.). Other suppliers of suspension products for snowmobiles include Öhlins Racing AB, Walker Evans Racing, Works Performance Products, Inc. and Penske Racing Shocks / Custom Axis, Inc. In the ATV and Side-by-Side markets, outside of captive OEM suppliers, we compete with ZF Sachs (ZF Friedrichshafen AG) and Walker Evans Racing for OEM business and Elka Suspension Inc., Öhlins Racing AB, Works Performance Products and Penske Racing Shocks / Custom Axis, Inc. for aftermarket business. In the market for off-road and specialty vehicle suspension products, we believe our two biggest competitors are ThyssenKrupp Bilstein Suspension GmbH (commonly known as Bilstein) and King Shock Technology, Inc. (commonly known as King Shock). Other competitors include Icon Vehicle Dynamics, Sway-A-Way, Pro Comp USA Suspension and Rancho (Tenneco).

Government Regulation

Environmental

Our manufacturing operations, facilities and properties in the United States and Taiwan are subject to evolving foreign, international, federal, state and local environmental and occupational health and safety laws and regulations, including those governing air emissions, wastewater discharge and the storage and handling of chemicals and hazardous substances. If we fail to comply with such laws and regulations, we could be subject to significant fines, penalties, costs, liabilities or restrictions on operations, which could negatively affect our financial condition.

We believe that our operations are in compliance, in all material respects, with applicable environmental and occupational health and safety laws and regulations, and our compliance with such laws and regulations has not had, nor is it expected to have, a material impact on our earnings or competitive position. However, new requirements, more stringent application of existing requirements or the discovery of previously unknown environmental conditions could result in material environmental related expenditures in the future.

Employment

We are also subject to numerous foreign, federal, state and local government laws and regulations governing our relationships with our employees, including those relating to minimum wage, overtime, working conditions, hiring and firing, non-discrimination, work permits and employee benefits. We believe that our operations are conducted in compliance, in all material respects, with such laws and regulations.

Consumer safety

We are subject to the jurisdiction of the United States Consumer Product Safety Commission, or the CPSC, and other federal, state and foreign regulatory bodies. Under CPSC regulations, a manufacturer of consumer goods is obligated to notify the CPSC, if, among other things, the manufacturer becomes aware that one of its products has a defect that could create a substantial risk of injury. If the manufacturer has not already undertaken to do so, the CPSC may require a manufacturer to recall a product, which may involve product repair, replacement or refund. During the past three years, we initiated one voluntary product recall.

Government Contracts

No material portion of the business is subject to renegotiation of profits or termination of contracts or subcontracts at the election of the U.S. government.

Financial Information about Segments and Geographic Areas

We operate in one reportable segment, high-performance suspension products. Additional information about our product segment and certain geographic information is available in Note 14, Segment and Geographic Areas of the “Notes to Consolidated Financial Statements” in this Annual Report on Form 10-K.

 

9


Table of Contents

Corporate and Available Information

Our principal executive offices are located at 915 Disc Drive, Scotts Valley, CA 95066, and our telephone number is (831) 274-6500. Our website address is www.ridefox.com. In addition, we maintain a Facebook page at www.facebook.com/fox , a YouTube channel at www.youtube.com/foxracingshox1 , a Vimeo page at www.vimeo.com / foxracingshox and a Twitter feed at www.twitter.com/foxracingshox. Information contained on, or that can be accessed through, our website, Facebook page, YouTube channel, Vimeo page or Twitter feed does not constitute part of this Annual Report and inclusions of our website address, Facebook page address, YouTube channel address, Vimeo page address and Twitter feed address in this Annual Report are inactive textual references only.

We file reports with the U.S. Securities and Exchange Commission (“SEC”), including Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and any other filings required by the SEC. We make available on our Investor Relations website, free of charge, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and all amendments to those reports, as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC. The information on our website is not incorporated by reference into this Annual Report on Form 10-K or in any other report or document we file with the SEC.

The public may read and copy any materials we file with the SEC at the SEC’s Public Reference Room at 100 F Street, NE, Washington, DC 20549. The public may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains an Internet site (http://www.sec.gov) that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC.

 

10


Table of Contents
ITEM 1A. RISK FACTORS

Our business, financial condition, operating results and prospects could be materially and adversely affected by various risks and uncertainties. In addition to the risks and uncertainties discussed elsewhere in this Form 10-K, you should carefully consider the risks and uncertainties described below. If any of the risks actually occur, our business, financial condition, operating results and prospects could be materially and adversely affected. In that event, the trading price of our common stock could decline.

Risks Related to Our Business

If we are unable to continue to enhance existing products and develop and market new products that respond to consumer needs and preferences and achieve market acceptance, we may experience a decrease in demand for our products, and our business and financial results could suffer.

Our growth strategy involves the continuous development of innovative high-performance products. We may not be able to compete as effectively with our competitors, and ultimately satisfy the needs and preferences of our customers and the end users of our products, unless we can continue to enhance existing products and develop new, innovative products in the global markets in which we compete. In addition, we must continuously compete not only for end users who purchase our products through the dealers and distributors who are our customers, but also for the original equipment manufacturers, or OEMs, which incorporate our products into their mountain bikes and powered vehicles. These OEMs regularly evaluate our products against those of our competitors to determine if they are allowing the OEMs to achieve higher sales and market share on a cost-effective basis. Should one or more of our OEM customers determine that they could achieve overall better financial results by incorporating a competitor’s new or existing product, they would likely do so, which could harm our business, financial condition or results of operations.

Product development requires significant financial, technological and other resources. While we expended approximately $10.4 million, $9.7 million and $9.8 million for our research and development efforts in 2013, 2012 and 2011, respectively, there can be no assurance that this level of investment in research and development will be sufficient in the future to maintain our competitive advantage in product innovation, which could cause our business, financial condition or results of operations to suffer.

Product improvements and new product introductions require significant planning, design, development and testing at the technological, product and manufacturing process levels, and we may experience unanticipated delays in our introduction of product improvements or new products. Our competitors’ new products may beat our products to market, be more effective and/or less expensive than our products, obtain better market acceptance or render our products obsolete. Any new products that we develop may not receive market acceptance or otherwise generate any meaningful sales or profits for us relative to our expectations. In addition, one of our competitors could develop an unforeseen and entirely new product or technology that renders our products less desirable or obsolete, which could negatively affect our business, financial condition or results of operations.

We face intense competition in all product lines, including from some competitors that may have greater financial and marketing resources. Failure to compete effectively against competitors would negatively impact our business and operating results.

The suspension industry is highly competitive. We compete with a number of other manufacturers that produce and sell suspension products to OEMs and aftermarket dealers and distributors, including OEMs that produce their own line of suspension products for their own use. Our continued success depends on our ability to continue to compete effectively against our competitors, some of which have significantly greater financial, marketing and other resources than we have. Also, several of our competitors offer broader product lines to OEMs, which they may sell in connection with suspension products as part of a package offering. In the future, our competitors may be able to maintain and grow brand strength and market share more effectively or quickly than we do by anticipating the course of market developments more accurately than we do, developing products that are superior to our products, creating manufacturing or distribution capabilities that are superior to ours, producing similar products at a lower cost than we can or adapting more quickly than we do to new technologies or evolving regulatory, industry or customer requirements, among other possibilities. In addition, we may encounter increased competition if our current competitors broaden their product offerings by beginning to produce additional types of suspension products or through competitor consolidations. We could also face competition from well-capitalized entrants into the high-performance suspension product market, as well as aggressive pricing tactics by other manufacturers trying to gain market share. As a result, our products may not be able to compete successfully with our competitors’ products, which could negatively affect our business, financial condition or results of operations.

Our business is sensitive to economic conditions that impact consumer spending. Our suspension products, and the mountain bikes and powered vehicles into which they are incorporated, are discretionary purchases and may be adversely impacted by changes in the economy.

Our business depends substantially on global economic and market conditions. In particular, we believe that currently a significant majority of the end users of our products live in the United States and countries in Europe. These areas are either in the process of recovering from recession or, in some cases, are still struggling with recession, disruption in banking and/or financial systems, economic weakness and uncertainty. In addition, our products are recreational in nature and are generally discretionary purchases by consumers. Consumers are usually more willing to make discretionary purchases during periods of favorable general economic conditions and high consumer confidence. Discretionary spending may also be affected by many other factors, including interest rates,

 

11


Table of Contents

the availability of consumer credit, taxes and consumer confidence in future economic conditions. During periods of unfavorable economic conditions, or periods when other negative market factors exist, consumer discretionary spending is typically reduced, which in turn could reduce our product sales and have a negative effect on our business, financial condition or results of operations.

There could also be a number of secondary effects resulting from an economic downturn, such as insolvency of our suppliers resulting in product delays, an inability of our OEM and distributor and dealer customers to obtain credit to finance purchases of our products, customers delaying payment to us for the purchase of our products due to financial hardship or an increase in bad debt expense. Any of these effects could negatively affect our business, financial condition or results of operations.

If we are unable to maintain our premium brand image, our business may suffer.

Our products are selected by both OEMs and dealers and distributors in part because of the premium brand reputation we hold with them and our end users. Therefore, our success depends on our ability to maintain and build our brand image. We have focused on building our brand through producing products that we believe are innovative, high in performance and highly reliable. In addition, our brand benefits from our strong relationships with our OEM customers and dealers and distributors and through marketing programs aimed at mountain bike and powered vehicle enthusiasts in various media and other channels. For example, we sponsor a number of professional athletes and professional race teams. In order to continue to enhance our brand image, we will need to maintain our position in the suspension products industry and continue to provide high quality products and services. Also, we will need to continue to invest in sponsorships, marketing and public relations.

There can be no assurance, however, that we will be able to maintain or enhance the strength of our brand in the future. Our brand could be adversely impacted by, among other things:

 

    failure to develop new products that are innovative, high-performance and reliable;

 

    internal product quality control issues;

 

    product quality issues on the mountain bikes and powered vehicles on which our products are installed;

 

    product recalls;

 

    high profile component failures (such as a component failure during a race on a mountain bike ridden by an athlete that we sponsor);

 

    negative publicity regarding our sponsored athletes;

 

    high profile injury or death to one of our sponsored athletes;

 

    inconsistent uses of our brand and our other intellectual property assets, as well as failure to protect our intellectual property; and

 

    changes in consumer trends and perceptions.

Any adverse impact on our brand could in turn negatively affect our business, financial condition or results of operations.

A significant portion of our sales are highly dependent on the demand for high-end mountain bikes and their suspension components and a material decline in the demand for these bikes or their suspension components could have a material adverse effect on our business or results of operations.

Part of our success has been attributable to the growth in the high-end mountain bike industry, including increases in average retail sales prices, as better-performing product designs and technologies have been incorporated into these products. If the popularity of high-end or premium priced mountain bikes does not increase or declines, the number of mountain bike enthusiasts seeking such mountain bikes or premium priced suspension products for their mountain bikes does not increase or declines, or the average price point of these bikes declines, we may fail to achieve future growth or our sales could decrease, and our business, financial condition or results of operations could be negatively affected. In addition, if current mountain bike enthusiasts stop purchasing our products due to changes in preferences, we may fail to achieve future growth or our sales could be decreased, and our business, financial condition or results of operations could be negatively affected.

Our growth in the powered vehicle category is dependent upon our continued ability to expand our product sales into powered vehicles that require high-performance suspension and the continued expansion of the market for these powered vehicles.

Our growth in the powered vehicle category is in part attributable to the expansion of the market for powered vehicles that require high-performance suspension products. Such market growth includes the creation of new classes of vehicles that need our products, such as Side-by-Sides, and our ability to create products for these vehicles. In the event these markets stopped expanding or

 

12


Table of Contents

contracted, or we are unsuccessful in creating new products for these markets or other competitors successfully enter into these markets, we may fail to achieve future growth or our sales could decrease, and our business, financial condition or results of operations could be negatively affected.

A disruption in the operations of our manufacturing facilities, including any disruption in connection with moving a majority of the manufacturing of our mountain bike products to Taiwan, could have a negative effect on our business, financial condition or results of operations.

We recently began to transfer a majority of the manufacturing of our mountain bike products to Taiwan. We contemplate that this transition will continue through 2015, at which time we anticipate that the majority of the manufacturing of our mountain bike products will be completed in Taiwan. During our transition process, we will incur some duplication of facilities, equipment and personnel, the amount of which could vary materially from our projections. Also, the transition process could cause manufacturing problems and give rise to execution risks, including disruptions to employees, negative impact on employee morale and retention, delays in recognizing efficiencies or increased costs of manufacturing, and adverse impacts on our product quality and delivery times. In addition, we could encounter unforeseen difficulties resulting from the distance and time zone differences between our main operations in California and our new Taiwan manufacturing facility. Should any of these problems occur, our business, financial condition or results of operations could be negatively affected.

Equipment failures, delays in deliveries or catastrophic loss at any of our facilities could lead to production or service disruptions, curtailments or shutdowns. In the event of a stoppage in production or a slowdown in production due to high employee turnover or a labor dispute at any of our facilities, even if only temporary, or if we experience delays as a result of events that are beyond our control, delivery times to our customers could be severely affected. If there was a manufacturing disruption in any of our manufacturing facilities, we might be unable to meet product delivery requirements and our business, financial condition or results of operations could be negatively affected, even if the disruption was covered in whole or in part by our business interruption insurance. Any significant delay in deliveries to our customers could lead to increased returns or cancellations, expose us to damage claims from our customers or damage our brand and, in turn, negatively affect our business, financial condition or results of operations.

Our business depends substantially on the continuing efforts of our senior management, and our business may be severely disrupted if we lose their services.

We are heavily dependent upon the contributions, talent and leadership of our senior management team, particularly our Chief Executive Officer, Larry L. Enterline. We do not have a “key person” life insurance policy on Mr. Enterline or any other key employees. We believe that the top eight members of our senior management team are key to establishing our focus and executing our corporate strategies as they have extensive knowledge of our systems and processes. Given our senior management team’s knowledge of the suspension products industry and the limited number of direct competitors in the industry, we believe that it could be difficult to find replacements should any of the members of our senior management team leave. Our inability to find suitable replacements for any of the members of our senior management team could negatively affect our business, financial condition or results of operations.

We depend on skilled engineers to develop and create our products, and the failure to attract and retain such individuals could adversely affect our business.

We rely on skilled and well-trained engineers for the design and production of our products, as well as in our research and development functions. Competition for such individuals is intense, particularly in Silicon Valley near where our headquarters are located. Our inability to attract or retain qualified employees in our design, production or research and development functions or elsewhere in our company could result in diminished quality of our products and delinquent production schedules, impede our ability to develop new products and harm our business, financial condition or results of operations.

We may not be able to sustain our past growth or successfully implement our growth strategy, which may have a negative effect on our business, financial condition or results of operations.

We grew our sales from approximately $197.7 million in 2011 to approximately $272.7 million in 2013. This growth rate may be unsustainable. Our future growth will depend upon various factors, including the strength of our brand image, our ability to continue to produce innovative suspension products, consumer acceptance of our products, competitive conditions in the marketplace, the growth in emerging markets for products requiring high-end suspension products and, in general, the continued growth of the high-end mountain bike and powered vehicle markets into which we sell our products. Our beliefs regarding the future growth of markets for high-end suspension products are based largely on qualitative judgments and limited sources and may not be reliable. If we are unable to sustain our past growth or successfully implement our growth strategy, our business, financial condition or results of operations could be negatively affected.

The professional athletes and race teams who use our products are an important aspect of our brand image. The loss of the support of professional athletes for our products or the inability to attract new professional athletes may harm our business.

If our products are not used by current or future professional athletes and race teams, our brand could lose value and our sales could decline. While our sponsorship agreements typically restrict our sponsored athletes and race teams from promoting, endorsing or using competitors’ products that compete directly within our product categories during the term of the sponsorship agreements, we do not typically have long-term contracts with any of the athletes or race teams whom we sponsor.

 

13


Table of Contents

If we are unable to maintain our current relationships with these professional athletes and race teams, if these professional athletes and race teams are no longer popular, if our sponsored athletes and race teams fail to have success or if we are unable to continue to attract the endorsement of new professional athletes and race teams in the future, the value of our brand and our sales could decline.

We depend on our relationships with dealers and distributors and their ability to sell and service our products. Any disruption in these relationships could harm our sales.

We sell our aftermarket products to dealers and distributors, and we depend on their willingness and ability to market and sell our products to consumers and provide customer and product service as needed. We also rely on our dealers and distributors to be knowledgeable about our products and their features. If we are not able to educate our dealers and distributors so that they may effectively sell our products as part of a positive buying experience, or if they fail to implement effective retail sales initiatives, focus selling efforts on our competitors’ products, reduce the quantity of our products that they sell or reduce their operations due to financial difficulties or otherwise, our brand and business could suffer.

We do not control our dealers or distributors and many of our contracts allow these entities to offer our competitors’ products. Our competitors may incentivize our dealers and distributors to favor their products. In addition, we do not have long-term contracts with a majority of our dealers and distributors, and our dealers and distributors are not obligated to purchase specified amounts of our products. In fact, the majority of our dealers and distributors buy from us on a purchase order basis. Consequently, with little or no notice, many of these dealers and distributors may terminate their relationships with us or materially reduce their purchases of our products. If we were to lose one or more of our dealers or distributors, we would need to obtain a new dealer or distributor to cover the particular location or product line, which may not be possible on favorable terms or at all. Alternatively, we could use our own sales force to replace such a dealer or distributor, but expanding our sales force into new locations takes a significant amount of time and resources and may not be successful. Further, many of our international distribution contracts contain exclusivity arrangements, which may prevent us from replacing or supplementing our current distributors under certain circumstances.

We are a supplier in the high-end mountain bike and powered vehicles markets, and our business is dependent in large part on the orders we receive from our OEM customers and from their success.

As a supplier to OEM customers, we are dependent in large part on the success of the business of our OEM customers. Model year changes by our OEM customers may adversely impact our sales or cause our sales to vary from quarter to quarter. In addition, losses in market share individually or a decline in the overall market of our OEM customers or the discontinuance by our OEM customers of their products which incorporate our products could negatively impact our business, financial condition or results of operations. For example, if our mountain bike producing OEM customers reduce production of their high-end mountain bikes, their orders to us for our products would in turn be reduced, which could negatively affect our business, financial condition or results of operations.

A relatively small number of customers account for a substantial portion of our sales. The loss of all or a substantial portion of our sales to any of these customers or the loss of market share by these customers could have a material adverse impact on us and our results of operations.

Sales attributable to our 10 largest OEM customers, which can vary from year to year, collectively accounted for approximately 57%, 56% and 53% of our sales in 2013, 2012 and 2011, respectively. The loss of all or a substantial portion of our sales to any of these OEM customers or the loss of market share by these customers could have a material adverse impact on our business, financial condition or results of operations.

Although we refer to the branded mountain bike OEMs that use our products throughout this document as “our customers,” “our OEM customers” or “our mountain bike OEM customers,” branded mountain bike OEMs often use contract manufacturers to manufacture and assemble their bikes. As a result, even though we typically negotiate price and volume requirements directly with our mountain bike OEM customers, it is the contract manufacturers that frequently place the purchase orders with us and are responsible for paying us (rather than the branded mountain bike OEMs). Giant is an OEM and contract manufacturer used by certain of our mountain bike OEM customers. Sales to Giant accounted for approximately 17%, 13% and 12% of our sales in 2013, 2012 and 2011, respectively. In the event Giant were to experience manufacturing or other problems, or were to fail to pay us, it could have a material adverse impact on our business, financial condition or results of operations.

Currency exchange rate fluctuations could result in decreased gross margins.

Foreign currency fluctuations could in the future have an adverse effect on our business, financial condition or results of operations. We sell our products inside and outside of the United States in U.S. Dollars. As the majority of our expenses are also in U.S. Dollars, we are somewhat insulated from currency fluctuations. However, some of the OEMs purchasing products from us sell their products in Europe and other foreign markets using the Euro and other foreign currencies. As a result, as the U.S. Dollar appreciates against these foreign currencies, our products will become relatively more expensive for these OEMs. Accordingly, competitive products that our OEM customers can purchase in other currencies may become more attractive and we could lose sales as these OEMs seek to replace our products with cheaper alternatives. In addition, should the U.S. Dollar depreciate significantly, this could have the effect of decreasing our gross margins and adversely impact our business, financial condition or results of operations. Furthermore, as we transfer a majority of our manufacturing operations for our mountain bike products to Taiwan, we anticipate that a growing percentage of our expenses will be denominated in the New Taiwan Dollar. Should the New Taiwan Dollar appreciate against the U.S. Dollar, this could have the effect of decreasing our gross margins.

 

14


Table of Contents

Our international operations are exposed to risks associated with conducting business globally.

As a result of our international presence, we are exposed to increased risks inherent in conducting business outside of the United States. In addition to foreign currency risks, these risks include:

 

    increased difficulty in protecting our intellectual property rights and trade secrets;

 

    changes in tax laws and the interpretation of those laws;

 

    exposure to local economic conditions;

 

    unexpected government action or changes in legal or regulatory requirements;

 

    geopolitical regional conflicts, terrorist activity, political unrest, civil strife, acts of war and other political uncertainty;

 

    changes in tariffs, quotas, trade barriers and other similar restrictions on sales;

 

    the effects of any anti-American sentiments on our brands or sales of our products;

 

    increased difficulty in ensuring compliance by employees, agents and contractors with our policies as well as with the laws of multiple jurisdictions, including but not limited to the U.S. Foreign Corrupt Practices Act, local international environmental, health and safety laws, and increasingly complex regulations relating to the conduct of international commerce;

 

    increased difficulty in controlling and monitoring foreign operations from the United States, including increased difficulty in identifying and recruiting qualified personnel for our foreign operations; and

 

    increased difficulty in staffing and managing foreign operations or international sales.

An adverse change in any of these conditions could have a negative effect upon our business, financial condition or results of operations.

Our sales could be adversely impacted by the disruption or cessation of sales by other bike component manufacturers or if other mountain bike component manufacturers enter into the suspension market.

Most of the mountain bikes incorporating our suspension products also utilize products and components manufactured by other mountain bike component manufacturers. If such component manufacturers were to cease selling their products and components on a stand-alone basis, their sales are disrupted, or their competitive market position or reputation is diminished, customers could migrate to competitors that sell both suspension and other complementary mountain bike products which we do not sell. Moreover, such mountain bike component manufacturers could begin manufacturing mountain bike suspension products or bundle their bike components with suspension products manufactured by competitors. If any of the foregoing were to occur, our sales could decrease and our business, financial condition or results of operations could suffer.

We have been and may become subject to intellectual property disputes that could cause us to incur significant costs or pay significant damages or that could prohibit us from selling our products.

As we develop new products or attempt to utilize our brands in connection with new products, we seek to avoid infringing the valid patents and other intellectual property rights of our competitors. However, from time to time, third parties have alleged, or may allege in the future, that our products and/or trademarks infringe upon their proprietary rights. We will evaluate any such claims and, where appropriate, may obtain or seek to obtain licenses or other business arrangements. To date, there have been no significant interruptions in our business as a result of any claims of infringement, and we do not hold patent infringement insurance. Any claim, regardless of its merit, could be expensive, time consuming to defend and distract management from our business. Moreover, if our products or brands are found to infringe third-party intellectual property rights, we may be unable to obtain a license to use such technology or associated intellectual property rights on acceptable terms. A court determination that our brands, products or manufacturing processes infringe the intellectual property rights of others could result in significant liability and/or require us to make material changes to our products and/or manufacturing processes or preclude our ability to use certain brands. In most circumstances, we are not indemnified for our use of a licensor’s intellectual property, if such intellectual property is found to be infringing. Any of the foregoing results could cause us to, and we could incur substantial costs to, redesign our products or defend legal actions, and such costs could negatively affect our business, financial condition or results of operations.

 

15


Table of Contents

If we are unable to enforce our intellectual property rights, our reputation and sales could be adversely affected.

Intellectual property is an important component of our business. As of December 31, 2013, we had 37 patents and had approximately 82 patents pending on file in the U.S. and European Patent offices. Additionally, we have registered or have applied for trademarks and service marks with the United States Patent and Trademark Office and a number of foreign countries, including the marks FOX ®, FOX RACING SHOX ® and REDEFINE YOUR LIMITS ® , to be utilized with certain goods and services. When appropriate, we may from time to time assert our rights against those who infringe on our patents, trademarks and trade dress. We may not, however, be successful in enforcing our patents or asserting trademark, trade name or trade dress protection with respect to our brand names and our product designs, and third parties may seek to oppose or challenge our patents or trademark registrations. Further, these legal efforts may not be successful in reducing sales of suspension products by those infringing. In addition, our pending patent applications may not result in the issuance of patents, and even issued patents may be contested, circumvented or invalidated and may not provide us with proprietary protection or competitive advantages. If our efforts to protect our intellectual property are unsuccessful, or if a third party misappropriates our rights, this may adversely affect our business, financial condition or results of operations. Additionally, intellectual property protection may be unavailable or limited in some foreign countries where laws or law enforcement practices may not protect our proprietary rights as fully as in the United States, and it may be more difficult for us to successfully challenge the use of our proprietary rights by other parties in these countries. Furthermore, other competitors may be able to successfully produce products which imitate certain of our products without infringing upon any of our patents, trademarks or trade dress. The failure to prevent or limit infringements and imitations, could have a permanent negative impact on the pricing of our products or reduce our product sales and product margins, even if we are ultimately successful in limiting the distribution of a product that infringes our rights, which in turn may affect our business, financial condition or results of operations.

Although we enter into non-disclosure agreements with employees, OEMs, distributors and others to protect our confidential information and trade secrets, we may be unable to prevent such parties from breaching these agreements with us and using our intellectual property in an unauthorized manner. If our efforts to protect our intellectual property are unsuccessful, or if a third party misappropriates our rights this may adversely affect our business. Defending our intellectual property rights can be very expensive and time consuming, and there is no assurance that we will be successful.

If we inaccurately forecast demand for our products, we may manufacture insufficient or excess quantities or our manufacturing costs could increase, which could adversely affect our business.

We plan our manufacturing capacity based upon the forecasted demand for our products. In the OEM channel, our forecasts are based in large part on the number of our product specifications for new mountain bikes and powered vehicles and on projections from our OEM customers. In the aftermarket channel, our forecasts are based partially on discussions with our dealers and distributors as well as our own assessment of markets. If we incorrectly forecast demand we may incur capacity issues in our manufacturing plant and supply chain, increased material costs, increased freight costs and additional overtime, all of which in turn adversely impact our cost of sales and our gross margin. For example, due to increased demand for our products beyond what was forecasted, our 2012 production exceeded our budgeted production, which resulted in increased expedited freight costs. The current continuing economic weakness and uncertainty in the United States, Europe and other countries has made, and may continue to make, accurate forecasting particularly challenging.

In the future, if actual demand for our products exceeds forecasted demand, the margins on our incremental sales in excess of anticipated sales may be lower due to temporary higher costs, which could result in a decrease in our overall margins. While we generally manufacture our products upon receipt of customer orders, if actual demand is less than the forecasted demand for our products and we have already manufactured the products or committed to purchase materials in support of forecasted demand, we could be forced to hold excess inventories. In short, either excess or insufficient production due to inaccurate forecasting could have a negative effect on our business, financial condition or results of operations.

Product recalls, and significant product repair and/or replacement due to product warranty costs and claims have had, and in the future could have, a material adverse impact on our business.

Unless otherwise required by law, we generally provide a limited warranty for our products for a one or two year period beginning on: (i) in the case of OEM sales, the date the mountain bike or powered vehicle is purchased from an authorized OEM where our product is incorporated as original equipment on the purchased mountain bike or powered vehicle; or (ii) in the case of aftermarket sales, the date the product is originally purchased from an authorized dealer. From time to time, our customers may negotiate for longer or different warranty coverage. In the ordinary course of business, we incur warranty costs and reserve against such costs in our financial statements. However, there is a risk that we could experience higher than expected warranty costs or become aware of an underperforming product. For example, during calendar year 2012, we experienced warranty costs in connection with certain dampers contained in our suspension products that went beyond the normal warranty amounts for which we have typically reserved, causing us to increase our reserves by approximately $1.8 million. We also experienced other warranty related costs in 2012 estimated to be approximately $1.0 million. Future unforeseen product warranty issues could be expensive and could adversely affect our brand image, relationships with our sponsored athletes and race teams and have a negative effect on our business, financial condition or results of operations.

We may be required to or voluntarily participate in recalls involving our products or components if any prove to be defective. In addition to the direct costs of any claim or product recall, any such claim or recall could adversely affect our brand image and have a negative effect on our relationships with our OEMs, sponsored athletes and race teams, or otherwise have a negative effect on our business, financial condition and results of operations or have other negative consequences. For example, during calendar year 2013,

 

16


Table of Contents

we initiated a voluntary recall of certain model year 2013 32 and 34 Evolution Series suspension forks having 120mm - 160mm of travel with certain open cartridge dampers manufactured by us between March 1, 2012 and November 30, 2012 (the “Recall”). The total costs we incur as a result of the Recall, including other related costs or claims, could be higher than expected and could adversely impact our financial performance. In addition, the warranty reserve we previously established regarding the dampers used in the forks which are the subject of the Recall may be insufficient to cover the repair related costs we actually incur as a result of the Recall

An adverse determination in any material product liability claim against us could adversely affect our operating results or financial condition.

The use of our products by consumers, often under extreme conditions, exposes us to risks associated with product liability claims. If our products are defective or used incorrectly by our customers, bodily injury, property damage or other injury, including death, may result and could give rise to product liability claims against us, which could adversely affect our brand image or reputation. We have encountered product liability claims in the past and carry product liability insurance to help protect us against the costs of such claims, although our insurance may not be sufficient to cover all losses. Any losses that we may suffer from any liability claims, and the effect that any product liability litigation may have upon the reputation and marketability of our products, may have a negative impact on our business, financial condition or results of operations.

Our 2013 Credit Facility places operating restrictions on us and creates default risks.

Our revolving credit facility, dated August 7, 2013, with SunTrust Bank and the other parties thereto (our “ 2013 Credit Facility”), contains covenants that place restrictions on our operating activities. These covenants, among other things, limit our ability to:

 

    pay dividends and make distributions or redeem our stock;

 

    incur additional indebtedness or permit additional encumbrances on our assets; and

 

    make acquisitions or complete mergers or sales of assets, or engage in new businesses.

These restrictions may interfere with our ability to obtain financing or to engage in other business activities, which may have a material adverse effect on our business, financial condition or results of operations.

If we are unable to comply with the covenants contained in our 2013 Credit Facility, it could constitute an event of default and our lenders could declare all borrowings outstanding, together with accrued and unpaid interest, to be immediately due and payable. If we are unable to repay or otherwise refinance these borrowings when due, our lenders could sell the collateral securing our credit facilities, which constitutes substantially all of our assets.

Our outstanding indebtedness under our secured credit facility bears interest at a variable rate, which makes us more vulnerable to increases in interest rates and could cause our interest expense to increase and decrease cash available for operations and other purposes.

In connection with our initial public offering (the “IPO”), we entered into the 2013 Credit Facility, which consists of a $60.0 million revolving line of credit, a $5.0 million sublimit for swingline loans and a $10.0 million sublimit for the issuance of letters of credit. Subject to the satisfaction of certain conditions precedent, we have the ability to increase the aggregate revolving loan commitments under the 2013 Credit Facility by an aggregate amount of up to $50.0 million, subject to the agreement of any existing lenders and/or any additional lenders who are providing such increased commitments. Borrowings under the 2013 Credit Facility bear interest on a variable rate which increases and decreases based upon changes in the underlying interest rate and/or our leverage ratio. Any such increases in the interest rate or increases of our borrowings under the 2013 Credit Facility will increase our interest expense.

As of December 31, 2013, we had $8.0 million of indebtedness, bearing interest at a variable rate, outstanding under the 2013 Credit Facility. Recent interest rates in the United States have been at historically low levels, and any increase in these rates would increase our interest expense and reduce our funds available for operations and other purposes. Although from time to time we may enter into agreements to hedge a portion of our interest rate exposure, these agreements may be costly and may not protect against all interest rate fluctuations. Accordingly, we may experience material increases in our interest expense as a result of increases in interest rate levels generally. Based on the $8.0 million of variable interest rate indebtedness that was outstanding as of December 31, 2013, a hypothetical 100 basis point increase or decrease in the interest rate on our variable rate debt would have resulted in an approximately $0.1 million change to our interest expense for fiscal 2013.

 

17


Table of Contents

We are subject to certain risks in our manufacturing and in the testing of our products.

As of December 31, 2013, we employed approximately 670 full-time employees worldwide, a large percentage of which work at our manufacturing facilities. Our business involves complex manufacturing processes that can be dangerous to our employees. Although we employ safety procedures in the design and operation of our facilities, there is a risk that an accident or death could occur in one of our facilities. Also, prior to the introduction of new products, our employees test the products under rigorous conditions, which involve the risk of injury or death. Any accident could result in manufacturing or product delays, which could negatively affect our business, financial condition or results of operations. The outcome of litigation is difficult to assess or quantify and the cost to defend litigation can be significant. As a result, the costs to defend any action or the potential liability resulting from any such accident or death or arising out of any other litigation, and any negative publicity associated therewith, could have a negative effect on our business, financial condition or results of operations.

Our products are subject to extensive United States federal and state, foreign and international safety, environmental, employment practices and other government regulations that may require us to incur expenses or modify product offerings in order to maintain compliance with such regulation, which could have a negative effect on our business and results of operations.

We are subject to extensive laws and regulations relating to safety, environmental, and other laws and regulations promulgated by the United States federal and state governments, as well as foreign and international regulatory authorities. Although we believe that our products, policies and processes comply with applicable safety, environmental, and other standards and related regulations, future regulations may require additional safety standards that would require additional expenses and/or modification of product offerings in order to maintain such compliance. Failure to comply with applicable regulations could result in fines, increased expenses to modify our products and harm to our reputation, all of which could have an adverse effect on our business, financial condition or results of operations.

Moreover, certain of our customer contracts require us to comply with the standards of voluntary standard-setting organizations, such as the United States Consumer Product Safety Commission and European Committee for Standardization (CEN). Failure to comply with the voluntary requirements of such organizations could result in the loss of certain customer contracts, which could have an adverse effect on our business, financial condition or results of operations.

We are subject to employment practice laws and regulations and as such are exposed to litigation risks.

We are subject to extensive laws and regulations relating employment practices, including wage and hour, wrongful termination and discrimination. Complying with such laws and regulations, and defending against allegations of our failure to comply (including meritless allegations), can be expensive and time consuming. We believe that our policies and processes comply with applicable employment standards and related regulations, however, we are subject to risks of litigation by employees and others which might involve allegations of illegal, unfair or inconsistent employment practices, including wage and hour violations and employment discrimination, misclassification of independent contractors as employees, wrongful termination and other concerns, which could require additional expenditures.

We are subject to environmental laws and regulation and potential exposure for environmental costs and liabilities.

Our operations, facilities and properties are subject to a variety of foreign, federal, state and local laws and regulations relating to health, safety and the protection of the environment. These environmental laws and regulations include those relating to the use, generation, storage, handling, transportation, treatment and disposal of solid and hazardous materials and wastes, emissions to air, discharges to waters and the investigation and remediation of contamination. Many of these laws impose strict, retroactive, joint and several liability upon owners and operators of properties, including with respect to environmental matters that occurred prior to the time the party became an owner or operator. In addition, we may have liability with respect to third party sites to which we send waste for disposal. Failure to comply with such laws and regulations can result in significant fines, penalties, costs, liabilities or restrictions on operations that could negatively affect our business, financial condition or results of operations. From time to time, we have been involved in administrative or legal proceedings relating to environmental, health or safety matters and have in the past incurred expenditures relating to such matters.

We believe that our operations are in substantial compliance with applicable environmental laws and regulations. However, additional environmental issues relating to presently known or unknown matters could give rise to currently unanticipated investigation, assessment or expenditures. Compliance with more stringent laws or regulations, as well as different interpretations of existing laws, more vigorous enforcement by regulators or unanticipated events, could require additional expenditures that may materially affect our business, financial condition or results of operations.

Federal, state, local, foreign and international laws and regulations relating to land-use, noise and air pollution may have a negative impact on our future sales and results of operations.

The products in our powered vehicles line are used in vehicles which are subject to numerous federal, state, local, foreign and international laws and regulations relating to noise and air-pollution. Powered vehicles, and even mountain bikes, have also become

 

18


Table of Contents

subject to laws and regulations prohibiting their use on certain lands and trails. For example, in San Mateo County, California, mountain bikes are not allowed on county trails, and ATV and Side-by-Side riding is not allowed in Zion National Park, among many other national and state parks. In addition, recreational snowmobiling has been restricted in some national parks and federal lands in Canada, the United States and other countries. If more of these laws and regulations are passed and the users of our products lose convenient locations to ride their mountain bikes and powered vehicles, our sales could decrease and our business, financial condition or results of operations could suffer.

Fuel shortages, or high prices for fuel, could have a negative effect on the use of powered vehicles that use our products.

Gasoline or diesel fuel is required for the operation of the powered vehicles that use our products. There can be no assurance that the supply of these fuels will continue uninterrupted, that rationing will not be imposed or that the price of or tax on these petroleum products will not significantly increase in the future. Shortages of gasoline and diesel fuel and substantial increases in the price of fuel could have a material adverse effect on our powered vehicle product category in the future, which could have a negative effect on our business, financial condition or results of operations.

We do not control our suppliers or OEMs, or require them to comply with a formal code of conduct, and actions that they might take could harm our reputation and sales.

We do not control our suppliers or OEMs or their labor, environmental or other practices. A violation of labor, environmental or other laws by our suppliers or OEMs, or a failure of these parties to follow generally accepted ethical business practices, could create negative publicity and harm our reputation. In addition, we may be required to seek alternative suppliers or OEMs if these violations or failures were to occur. We do not inspect or audit compliance by our suppliers or OEMs with these laws or practices, and we do not require our suppliers or OEMs or licensees to comply with a formal code of conduct. Any conduct or actions that our suppliers could take could reduce demand for our products, harm our ability to meet demand or harm our reputation, brand image, business, financial condition or results of operations.

We depend on a limited number of suppliers for our materials and component parts for some of our products, and the loss of any of these suppliers or an increase in cost of raw materials could harm our business.

We depend on a limited number of suppliers for certain components. If our current suppliers, in particular the minority of those which are “single-source” suppliers, are unable to timely fulfill orders, or if we are required to transition to other suppliers, we could experience significant production delays or disruption to our business. We define a single-source supplier as a supplier from which we purchase all of a particular raw material or input used in our manufacturing operations, although other suppliers are available from which to purchase the same raw material or input or an equivalent substitute. We do not maintain long term supply contracts with any of our suppliers and instead purchase these components on a purchase order basis. As a result, we cannot force any supplier to sell us the necessary components we use in creating our products and we could face significant supply disruptions should they refuse to do so. In connection with the transfer of a majority of the manufacturing of our mountain bike products to Taiwan, we could experience difficulties locating new qualified suppliers geographically located closer to these facilities. Furthermore, such new suppliers could experience difficulties in providing us with some or all of the materials we require, which could result in disruptions in our manufacturing operations. If we experience difficulties with our suppliers or manufacturing delays caused by our suppliers, whether in connection with our manufacturing operations in the United States or in Taiwan, our business, financial condition and results of operations could be materially and adversely impacted.

In addition, we purchase various raw materials in order to manufacture our products. The main commodity items purchased for production include aluminum, magnesium and steel. Historically, price fluctuations for these components and raw materials have not had a material impact on our business. In the future, however, if we experience material increases in the price of components or raw materials and are unable to pass on those increases to our customers, or there are shortages in the availability of such component parts or raw materials, it could negatively affect our business, financial condition or results of operations.

In addition to our various single-source suppliers, we also rely on one “sole-source” supplier, Miyaki Corporation, or Miyaki. We define a sole-source supplier as a supplier of a raw material or input for which there is no other supplier of the same product or an equivalent substitute. Miyaki is the exclusive producer of the Kashima coating for our suspension component tubes. As part of our agreement with Miyaki, we have been granted the exclusive right to use the trademark “KASHIMACOAT” on products comprising the aluminum finished parts for suspension components (e.g., tubes) and on related sales and marketing material worldwide, subject to certain exclusions. Although we believe we could obtain other coatings of comparable utility from other sources if necessary, we could no longer obtain this specific Kashima coating or use the trademark “KASHIMACOAT” if Miyaki were to stop supplying us with this coating. The need to replace the Kashima coating could temporarily disrupt our business and harm our business, financial condition or results of operations.

New regulations related to conflict minerals may force us to incur additional expenses and otherwise adversely impact our business.

The SEC has promulgated final rules mandated by the Dodd-Frank Act regarding disclosure of the use of tin, tantalum, tungsten and gold, known as conflict minerals, in products manufactured by public companies. These new rules require ongoing due diligence to determine whether such minerals originated from the Democratic Republic of Congo (the DRC) or an adjoining country and whether

 

19


Table of Contents

such minerals helped finance the armed conflict in the DRC. Reporting obligations for the rule begin May 31, 2014 and are required annually thereafter. As a new public company, we will be required to comply with the reporting obligations beginning with our fiscal year ended December 31, 2016. There will be costs associated with complying with these disclosure requirements, including costs to determine the origin of conflict minerals in our products. The implementation of these rules and their effect on customer, supplier and/or consumer behavior could adversely affect the sourcing, supply and pricing of materials used in our products. As a result, we may also incur costs with respect to potential changes to products, processes or sources of supply. We may face disqualification as a supplier for customers and reputational challenges if the due diligence procedures we implement do not enable us to verify the origins for all conflict minerals used in our products or to determine if such conflict minerals are conflict-free. Accordingly, the implementation of these rules could have a material adverse effect on our business, results of operations and/or financial condition.

The transition of a majority of the manufacturing of our mountain bike products to Taiwan may negatively impact our brand image and consumer loyalty, which in turn could have a material adverse impact on our business and results of operations.

As we transition the majority of the manufacturing of our mountain bike products to Taiwan, no assurances can be given that consumers may not be adversely influenced by the fact that such products will no longer be manufactured in the United States or that consumers and OEM customers may not otherwise perceive that the quality of our products is lowered as a result of the fact that they will be manufactured overseas. Such perceptions could adversely impact our business, financial condition or results of operations.

Federal health care reform legislation could increase our expenses and adversely impact our results of operations.

In March 2010, the Patient Protection and Affordable Care Act and the Health Care and Education Reconciliation Act of 2010 were signed into law in the United States. These health care reform laws require employers such as us to provide health insurance for all qualifying employees or pay penalties for not providing coverage. We are unable at this time to accurately predict the impact that these laws will have on our future health care benefit and insurance premium costs and our costs for temporary employees that we obtain through agencies. If these costs increase and we are unable to raise the prices we charge our customers to cover these increased expenses, such increases in costs could adversely impact our business, financial condition or results of operations.

We rely on increasingly complex information systems for management of our manufacturing, distribution, sales and other functions. If our information systems fail to perform these functions adequately or if we experience an interruption in our operations, our business could suffer.

All of our major operations, including manufacturing, distribution, sales and accounting, are dependent upon our complex information systems. Our information systems are vulnerable to damage or interruption from, among other things:

 

    earthquake, fire, flood, hurricane and other natural disasters;

 

    power loss, computer systems failure, internet and telecommunications or data network failure; and

 

    hackers, computer viruses, software bugs or glitches.

Any damage or significant disruption in the operation of such systems or the failure of our information systems to perform as expected could disrupt our operations, reduce our efficiency, delay our fulfillment of customer orders or require significant unanticipated expenditures to correct, and thereby have a negative effect on our business, financial condition or results of operations.

 

20


Table of Contents

We may grow in the future through acquisitions. Growth by acquisitions involves risks and we may not be able to effectively integrate businesses we acquire or we may not be able to identify or consummate any future acquisitions on favorable terms, or at all.

In the fourth quarter of 2013 we acquired certain assets of our third party Germany-based distributor and service center, and we intend to selectively evaluate additional acquisitions in the future. Any acquisitions that we might make are subject to various risks and uncertainties and could have a negative impact on our business, financial condition or results of operations. These risks include the inability to integrate effectively the operations, products, technologies and personnel of the acquired companies (some of which may be spread out in different geographic regions), the inability to achieve anticipated cost savings or operating synergies, and the risk we may not be able to effectively manage our operations at an increased scale of operations resulting from such acquisitions. In the event we do complete acquisitions in the future, such acquisitions could affect our cash flows and net income as we expend funds, increase indebtedness and incur additional expenses in connection with pursuing acquisitions. We may also issue shares of our common stock or other securities from time to time as consideration for future acquisitions and investments. We may not be able to identify or consummate any future acquisitions on favorable terms, or at all.

Our operating results are subject to quarterly variations in our sales, which could make our operating results difficult to predict and could adversely affect the price of our common stock.

We have experienced, and expect to continue to experience, substantial quarterly variations in our sales and net income. Our quarterly results of operations fluctuate, in some cases significantly, as a result of a variety of other factors, including, among other things:

 

    the timing of new product releases or other significant announcements by us or our competitors;

 

    new advertising initiatives;

 

    fluctuations in raw materials and component costs; and

 

    changes in our practices with respect to building inventory.

As a result of these quarterly fluctuations, comparisons of our operating results between different quarters within a single year are not necessarily meaningful and may not be accurate indicators of our future performance. Any quarterly fluctuations that we report in the future may differ from the expectations of market analysts and investors, which could cause the price of our common stock to fluctuate significantly. We also believe that the seasonal nature of our business may have been overshadowed over each of the past few years due to the rapid growth in sales we have experienced during the same period.

Our beliefs regarding the future growth of the high-performance suspension product market are supported by qualitative data and limited sources and may not be reliable. A reduction or lack of continued growth in the popularity of high-end mountain bikes or powered vehicles or in the number of consumers who are willing to pay premium prices for well-designed performance-oriented equipment in the markets in which we sell our products could adversely affect our product sales and profits, financial condition or results of operations.

We generate virtually all of our revenues from sales of high-performance suspension products. Our beliefs regarding the outlook of the high-performance suspension product market come from qualitative data and limited sources, which may not be reliable. If our beliefs regarding the opportunities in the market for our products are incorrect or the number of consumers who we believe are willing to pay premium prices for well-designed performance-oriented equipment in the markets in which we sell our products does not increase, or declines, we may fail to achieve future growth and our business, financial condition or results of operations could be negatively affected.

Risks Related to Ownership of Our Common Stock

The trading price of our common stock may be volatile, and you might not be able to sell your shares at or above the price you pay for the shares.

Prior to our IPO in August 2013, our common stock had no prior trading history. The trading price of our common stock could be volatile, and you could lose all or part of your investment in our common stock. Factors affecting the trading price of our common stock could include:

 

    variations in our operating results or those of our competitors;

 

    new product or other significant announcements by us or our competitors;

 

    changes in our product mix;

 

21


Table of Contents
    changes in consumer preferences;

 

    fluctuations in currency exchange rates;

 

    the gain or loss of significant customers;

 

    recruitment or departure of key personnel;

 

    changes in the estimates of our operating results or changes in recommendations by any securities analysts that elect to follow our common stock;

 

    changes in general economic conditions as well as conditions affecting our industry in particular;

 

    sales of our common stock by us, our significant stockholders or our directors or executive officers; and

 

    the expiration of contractual lock-up agreements.

In addition, in recent years, the stock market has experienced significant price fluctuations. Fluctuations in the stock market generally or with respect to companies in our industry could cause the trading price of our common stock to fluctuate for reasons unrelated to our business, operating results or financial condition. Some companies that have had volatile market prices for their securities have had securities class actions filed against them. A suit filed against us, regardless of its merits or outcome, could cause us to incur substantial costs and could divert management’s attention.

A market for our securities may not be maintained and our stock price may decline.

Prior to our IPO in August 2013, there had been no public market for shares of our common stock. Although we have completed our IPO and shares of our common stock are listed and trading on the NASDAQ Global Select Market, an active trading market for our shares may not be sustained. In addition, we cannot provide any guarantee as to the liquidity of such market. In the absence of an active trading market for our common stock, stockholders may not be able to sell their shares of our common stock at the time they would like to sell.

Future sales of our shares, or the perception that such sales may occur, could cause our stock price to decline.

If our existing stockholders sell substantial amounts of our common stock in the public market, or are perceived by the public market as intending to sell, the trading price of our common stock could decline below the IPO price. As of December 31, 2013, we had 36,317,087 shares of common stock outstanding, 9,857,143 of which are freely tradable, without restriction, in the public market. As of December 31, 2013, 25,544,967 shares of common stock outstanding were held by directors, executive officers and other affiliates and are subject to volume and manner of sale limitations under Rule 144 under the Securities Act. Certain of our existing stockholders have demand and piggyback rights to require us to register with the SEC up to 27,745,658 shares of our common stock. If we register any of these shares of common stock, those stockholders would be able to sell those shares freely in the public market.

In addition, the shares that either are subject to outstanding options or may be granted in the future under our equity incentive plans will become eligible for sale in the public market to the extent permitted by the provisions of various vesting agreements and Rules 144 and 701 under the Securities Act.

We are an “emerging growth company,” and the reduced disclosure requirements applicable to emerging growth companies could make our common stock less attractive to investors.

We are an “emerging growth company,” as defined in the Jumpstart Our Business Startups Act of 2012. For as long as we are an emerging growth company, we may take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not emerging growth companies, including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404(b) of the Sarbanes-Oxley Act of 2002, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements and exemptions from the requirements of holding advisory “say-on-pay” and “say-when-on-pay” votes on executive compensation and shareholder advisory votes on golden parachute compensation. We will remain an emerging growth company until the earliest of (i) the last day of the fiscal year during which we have total annual gross revenues of $1 billion or more; (ii) the last day of the fiscal year following the fifth anniversary of the completion of our IPO; (iii) the date on which we have, during the previous three-year period, issued more than $1 billion in non-convertible debt; or (iv) the date on which we are deemed to be a “large accelerated filer” under the Securities Exchange Act of 1934, as amended, or the Exchange Act.

We cannot predict if investors will find our common stock less attractive to the extent we rely on these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may be more volatile.

 

22


Table of Contents

If securities or industry analysts do not publish research or if they publish unfavorable research about our business, our stock price and trading volume could decline.

The trading market for our common stock will depend in part on the research and reports that securities or industry analysts publish about us or our business. If one or more of the analysts who covers us downgrades our stock or publishes unfavorable research about our business or our industry, our stock price would likely decline. If one or more of these analysts ceases coverage of our company or fails to publish reports on us regularly, demand for our stock could decrease, which could cause our stock price and trading volume to decline.

Our Sponsor and our directors and officers and insiders have substantial control over us and are able to influence corporate matters.

As of December 31, 2013, our Sponsor, beneficially owned approximately 53.9% of our outstanding common stock, and our directors and executive officers and their affiliates (excluding our Sponsor) beneficially owned, in the aggregate, approximately 13.0% of our outstanding common stock. As a result, these stockholders are able to exercise significant influence and, in the case of our Sponsor, control over all matters requiring stockholder approval, including the election of directors, amendment of our Amended and Restated Certificate of Incorporation, and approval of any merger, consolidation, or sale of all, or substantially all, of our assets or other significant corporate transactions. In addition, our Sponsor has input on all matters before our board of directors because our director Elias Sabo is affiliated with our Sponsor. Our Sponsor may also delay or prevent a change of control or otherwise discourage a potential acquirer from attempting to obtain control of us, even if such a change of control would benefit our other stockholders. So long as our Sponsor or any of its affiliates continue to indirectly own a significant amount of our outstanding common stock, even if such amount drops below 50%, they will continue to be able to significantly influence our decisions.

In addition, our Sponsor is in the business of making investments in companies and may from time to time acquire and hold interests in businesses that may compete directly or indirectly with us. Our Sponsor may also pursue acquisition opportunities that are complementary to our business and, as a result, those acquisition opportunities may not be available to us.

We will incur increased costs and demands upon management as a result of complying with the laws and regulations affecting public companies, which could adversely affect our operating results.

As a public company, we will incur significant legal, accounting and other expenses that we did not incur as a private company, including costs associated with public company reporting and corporate governance requirements. These requirements include eventual compliance with Section 404 and other provisions of the Sarbanes-Oxley Act of 2002, as well as rules implemented by the SEC and The NASDAQ Stock Market LLC. In addition, our management team will also have to adapt to the requirements of being a public company. We expect complying with these rules and regulations will substantially increase our legal and financial compliance costs and to make some activities more time-consuming and costly.

The increased costs associated with operating as a public company will decrease our net income or increase our net loss, and may require us to reduce costs in other areas of our business or increase the prices of our products or services. Additionally, if these requirements divert our management’s attention from other business concerns, they could have a material adverse effect on our business, prospects, financial condition and operating results.

As a public company, we also expect that it may be more difficult and more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced policy limits and coverage or incur substantially higher costs to obtain the same or similar coverage. As a result, it may be more difficult for us to attract and retain qualified individuals to serve on our board of directors or as our executive officers.

 

23


Table of Contents

Anti-takeover provisions in our charter documents and Delaware law could discourage, delay or prevent a change in control of our company.

Our Amended and Restated Certificate of Incorporation and Amended and Restated Bylaws, or our Charter Documents, as well as Delaware law, contain provisions that may discourage, delay or prevent a change in our management or control over us that stockholders may consider favorable. Among other things, these provisions:

 

    authorize the issuance of “blank check” preferred stock that could be issued by our board of directors to discourage a takeover attempt;

 

    establish a classified board of directors, as a result of which the successors to the directors whose terms have expired will be elected to serve from the time of election and qualification until the third annual meeting following their election;

 

    require that directors be removed from office only for cause;

 

    provide that vacancies on our board of directors, including newly created directorships, may be filled only by a majority vote of directors then in office;

 

    from and after the date that our Sponsor and its affiliates no longer collectively beneficially own (as determined pursuant to Rule 13d-3 under the Exchange Act), directly or indirectly, at least a majority of the voting power of all then outstanding shares of our capital stock entitled to vote generally in the election of directors, or the Trigger Date, prohibit stockholder action by written consent, requiring all actions to be taken at a meeting of the stockholders;

 

    provide that special meetings of our stockholders may be called only by our board of directors, our Chairperson of the board of directors, our Lead Director (if we do not have a Chairperson or the Chairperson is disabled), our Chief Executive Officer or our President (in the absence of a Chief Executive Officer) or, until the Trigger Date, our Sponsor;

 

    from and after the Trigger Date, require supermajority stockholder voting for our stockholders to effect certain amendments to our Charter Documents; and

 

    establish advance notice requirements for nominations for elections to our board of directors or for proposing other matters that can be acted upon by stockholders at stockholder meetings.

In addition, we are subject to Section 203 of the General Corporation Law of the State of Delaware, or DGCL, which generally limits the ability of a Delaware corporation to engage in any broad range of business combinations with a stockholder owning 15% or more of such corporation’s outstanding voting stock for a period of three years following the date on which such stockholder became an “interested” stockholder. In order for us to consummate a business combination with an interested stockholder within three years of the date on which the stockholder became interested, either (i) the business combination or the transaction that resulted in the stockholder becoming interested must be approved by our board of directors prior to the date the stockholder became interested, (ii) the interested stockholder must own at least 85% of our outstanding voting stock at the time the transaction commences (excluding voting stock owned by directors who are also officers and certain employee stock plans) or (iii) the business combination must be approved by our board of directors and authorized by at least two-thirds of our stockholders (excluding the interested stockholder) at a special or annual meeting (not by written consent). This provision could have the effect of delaying or preventing a change in control, whether or not it is desired by or beneficial to our stockholders. Any delay or prevention of a change in control transaction or changes in our board of directors and management could deter potential acquirers or prevent the completion of a transaction in which our stockholders could receive a substantial premium over the then-current market price for their shares of our common stock.

Our Amended and Restated Certificate of Incorporation designates the Court of Chancery of the State of Delaware as the sole and exclusive forum for certain types of actions and proceedings that may be initiated by our stockholders, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us or our directors, officers or other employees.

Our Amended and Restated Certificate of Incorporation provides that, with certain limited exceptions, unless we consent in writing to the selection of an alternative forum, the Court of Chancery of the State of Delaware will be the sole and exclusive forum for (i) any derivative action or proceeding brought on our behalf, (ii) any action asserting a claim of breach of fiduciary duty owed by any director, officer or other employee of our company owed to us or our stockholders, (iii) any action asserting a claim against us arising pursuant to any provision of the DGCL or our Charter Documents, (iv) any action to interpret, apply, enforce or determine the validity of our Charter Documents, or (v) any action asserting a claim governed by the internal affairs doctrine. Any person or entity purchasing or otherwise acquiring any interest in shares of our capital stock is deemed to have received notice of and consented to the foregoing provisions. This choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or our directors, officers or other employees, which may discourage such lawsuits against us and our directors, officers and employees. Alternatively, if a court were to find this choice of forum provision inapplicable to, or

 

24


Table of Contents

unenforceable in respect of, one or more of the specified types of actions or proceedings, we may incur additional costs associated with resolving such matters in other jurisdictions, which could adversely affect our business, financial condition or results of operations.

 

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

 

ITEM 2. PROPERTIES

Our principal offices and manufacturing facilities in the United States are located in Scotts Valley, California and Watsonville, California, and currently our international manufacturing facility is located in Taiwan. We believe that our properties are otherwise generally suitable to meet our needs for the foreseeable future. In addition, to the extent we require additional space in the future, we believe that it would be readily available on commercially reasonable terms. See Item 1. “Business—Facilities” for more information about our facilities.

 

ITEM 3. LEGAL PROCEEDINGS

From time to time we are involved in legal proceedings incidental to our business, in particular intellectual property related disputes, product liability claims, as well as other litigation of a nonmaterial nature in the ordinary course of business. In connection with ASC 450, Contingencies, we have not accrued for material loss contingencies relating to any legal proceedings because we believe that, although unfavorable outcomes in proceedings may be possible, they are not considered by our management to be probable and reasonably estimable. We believe that the outcome of any such pending matters, either individually or in the aggregate, will not have a material impact on our business or financial condition.

 

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

 

25


Table of Contents

PART II

 

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

Market Information

Our common stock has been listed on the NASDAQ under the symbol “FOXF” since August 8, 2013. Our IPO was priced at $15.00 per share on August 8, 2013. Prior to that date, there was no public trading market for our common stock.

The following table sets forth, for the periods indicated, the high and low sales prices per share of our common stock as reported on the NASDAQ.

 

     High      Low  

Fiscal Year Ended December 31, 2013

     

Quarter ended September 30, 2013 (beginning August 8, 2013)

   $ 20.75       $ 16.36   

Quarter ended December 31, 2013

   $ 20.17       $ 15.65   

On February 28, 2014, the closing price per share of our common stock as reported on the NASDAQ was $16.70 per share.

Stockholders

As of February 28, 2014, there were approximately 15 holders of record of our common stock. The actual number of stockholders is greater than this number of record holders, and includes stockholders who are beneficial owners, but whose shares are held in street name by brokers and other nominees. This number of holders of record also does not include stockholders whose shares may be held in trust by other entities.

Dividend Policy

In June 2012, in connection with our recapitalization, we paid a cash dividend to our stockholders equal to an aggregate of $67.0 million. We did not declare or pay any dividends in the years ended December 31, 2013 and 2011. Although we declared a cash dividend on our common stock in June 2012 in connection with our recapitalization, we intend to retain any future earnings and do not expect to pay any dividends in the foreseeable future. In addition, our 2013 Credit Facility contains covenants limiting our ability to pay dividends to our stockholders. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Credit Facility.” Any future determination to declare cash dividends will be made at the discretion of our board of directors, subject to applicable laws, and will depend on a number of factors, including our financial condition, results of operations, capital requirements, contractual restrictions, general business conditions and any other factors that our board of directors may deem relevant.

Equity Compensation Plan Information

For equity compensation plan information refer to Item 12 in Part III of this Annual Report on Form 10-K.

 

26


Table of Contents

Performance Graph

The following graph shows a comparison from August 8, 2013 (the date our common stock commenced trading on the NASDAQ) through December 31, 2013 of the total cumulative return of our common stock with the total cumulative return of the NASDAQ Composite Index (the “NASDAQ Composite”), and S&P 500 Index (“S&P 500”). The figures represented below assume an investment of $100 in our common stock at the closing price of $18.61 on August 8, 2013 and in the NASDAQ Composite and S&P 500. Data for the NASDAQ Composite and S&P 500 assume reinvestment of dividends. The comparisons in the graph are historical and are not intended to forecast or be indicative of possible future performance of our common stock.

 

LOGO

This performance graph shall not be deemed to be “soliciting material” or “filed” or incorporated by reference in future filings with the SEC, or subject to the liabilities of Section 18 of the Exchange Act except as shall be expressly set forth by specific reference in such filing.

Issuer Purchases of Equity Securities

No shares of our common stock were repurchased during the three months ended December 31, 2013.

 

27


Table of Contents
ITEM 6. SELECTED FINANCIAL DATA

The following selected consolidated financial and other data should be read in conjunction with, and are qualified by reference to, Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and our audited consolidated financial statements and the accompanying notes included elsewhere in this Annual Report. The consolidated statements of operations data for the years ended December 31, 2013, 2012 and 2011 and the consolidated balance sheet data as of December 31, 2013 and 2012 are derived from the audited consolidated financial statements that are included elsewhere in this Annual Report. We have included, in our opinion, all adjustments, consisting only of normal recurring adjustments that we consider necessary for a fair presentation of the financial information set forth in those statements. The consolidated statements of operations data for the years ended December 31, 2009 and 2010 as well as the consolidated balance sheet data as of December 31, 2009, 2010 and 2011, are derived from audited consolidated financial statements that are not included in this Annual Report. Our historical results are not necessarily indicative of the results to be expected in the future.

 

     For the years ended December 31,  
(in thousands, except per share data)    2013     2012     2011     2010     2009  

Sales

   $ 272,746      $ 235,869      $ 197,739      $ 170,983      $ 121,519   

Cost of sales(1)

     192,617        173,040        140,849        122,373        87,038   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Gross profit

     80,129        62,829        56,890        48,610        34,481   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Operating expenses:

          

Sales and marketing(1)

     14,153        12,570        11,748        10,293        8,269   

Research and development(1)

     10,409        9,727        9,750        7,321        5,545   

General and administrative(1)

     11,408        9,063        7,588        6,202        4,792   

Amortization of purchased intangibles

     5,378        5,315        5,217        5,217        5,217   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Total operating expenses

     41,348        36,675        34,303        29,033        23,823   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Income from operations

     38,781        26,154        22,587        19,577        10,658   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Other expense, net:

          

Interest expense

     (4,125 )     (3,486 )     (1,982 )     (2,637 )     (3,089 )

Other income (expense), net

     12        (277 )     (13 )     39        44   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Total other expense, net

     (4,113 )     (3,763 )     (1,995 )     (2,598 )     (3,045 )
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Income before income taxes

     34,668        22,391        20,592        16,979        7,613   

Provision for income taxes

     10,566        8,181        7,054        6,210        2,585   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Net income

   $ 24,102      $ 14,210      $ 13,538      $ 10,769      $ 5,028   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Earnings per share:

          

Basic

   $ 0.70      $ 0.44      $ 0.45      $ 0.36      $ 0.17   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Diluted

   $ 0.68      $ 0.44      $ 0.42      $ 0.34      $ 0.16   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Weighted average common shares used to compute net income per share:

          

Basic

     34,571        32,059        30,030        30,118        30,123   

Diluted

     35,705        32,515        32,295        31,828        31,286   

Dividends per share

   $ —        $ 2.00      $ —        $ —        $ —     

 

28


Table of Contents
(1) Includes stock-based compensation (excluding tax effect) as follows:

 

     For the years ended December 31,  
     2013      2012     2011      2010      2009  
     (in thousands)  

Cost of sales

   $ 23       $ —        $ —         $ —         $ —     

Sales and marketing

     158         160        78         40         27   

Research and development

     53         29        12         12         12   

General and administrative

     2,266         1,959        940         472         385   
  

 

 

    

 

 

   

 

 

    

 

 

    

 

 

 

Total

     2,500         2,148      $ 1,030       $ 524       $ 425   
  

 

 

    

 

 

   

 

 

    

 

 

    

 

 

 
     As of December 31,  
     2013      2012     2011      2010      2009  
     (in thousands)  

Consolidated Balance Sheet Data:

             

Cash and cash equivalents

   $ 1,683       $ 15      $ 114       $ 502       $ 326   

Inventory

     42,783         34,255        29,531         28,055         16,968   

Working capital

     39,884         25,142        23,108         23,602         16,451   

Property and equipment, net

     13,418         11,789        9,005         7,393         5,900   

Total assets

     157,729         142,120        129,956         130,823         120,292   

Total debt, including current portion

     8,000         59,250 (1)      15,293         33,660         40,536   

Total stockholders’ equity

     92,292         29,584 (2)      67,295         52,727         42,171   

 

(1) In June 2012, we engaged in a recapitalization involving our debt, stock options and share purchases. In connection with the recapitalization, we amended our 2008 credit facility with our Sponsor which provided a revolving line of credit facility and a term loan facility (“Prior Credit Facility”). See Note 8, Debt, in the “Notes to the Consolidated Financial Statements” in Item 8 “Financial Statements and Supplementary Data” for more information.
(2) In June 2012, we paid a $67.0 million cash dividend as part of our recapitalization. See Note 8, Debt, in the “Notes to the Consolidated Financial Statements” in Item 8 “Financial Statements and Supplementary Data” for more information.

 

29


Table of Contents
ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following discussion and analysis of our financial condition and results of operations should be read in conjunction with the section titled “Selected Financial Data” and the consolidated financial statements and related notes thereto included elsewhere in this Annual Report. This discussion contains forward-looking statements that involve risks and uncertainties. Our actual results could differ materially from those discussed below. You should review the “Risk Factors” and “Special Note Regarding Forward-Looking Statements” sections of this Annual Report for a discussion of important factors that could cause actual results to differ materially from the results described in or implied by the forward-looking statements contained in the following discussion and analysis.

Overview

We are a designer, manufacturer and marketer of high-performance suspension products used primarily on mountain bikes, side-by-side vehicles, or Side-by-Sides, on-road vehicles with off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, or ATVs, snowmobiles, specialty vehicles and applications, and motorcycles. We currently sell to over 150 OEMs and distribute our products to more than 2,500 retail dealers and distributors worldwide. In each of the years ended December 31, 2013, 2012 and 2011, approximately 81%, 81% and 80%, respectively, of our sales were attributable to sales made to our OEM customers. The remaining sales were to our aftermarket customers. Virtually all of our revenues were from our product sales; miscellaneous sources of revenue such as royalty income and service related repair work and the associated sale of components represented less than 1% of our sales in each of the years ended December 31, 2013, 2012 and 2011.

We have determined that we operate in one reportable segment, which is the manufacturing, sale and service of ride dynamics products. Our products fall into the following two categories:

 

    mountain bikes; and

 

    powered vehicles, including Side-by-Sides, on-road vehicles with off-road capabilities, off-road vehicles and trucks, ATVs, snowmobiles, specialty vehicles and applications, and motorcycles.

A significant portion of our sales are dependent on the demand for high-end or premium priced mountain bikes and their suspension components. In each of the years ended December 31, 2013, 2012 and 2011, approximately 66%, 67% and 69%, respectively, of our sales were attributable to sales of suspension products for mountain bikes and approximately 34%, 33% and 31%, respectively, of our sales were attributable to sales of suspension products for powered vehicles.

Our domestic sales totaled $96.1 million, $84.3 million and $65.8 million, or 35%, 36% and 33% of our total sales in 2013, 2012 and 2011, respectively. Our international sales totaled $176.6 million, $151.6 million and $132.0 million, or 65%, 64% and 67% of our total sales in each of the years ended December 31, 2013, 2012 and 2011, respectively. Sales attributable to countries outside the United States are based on shipment location. Our international sales, however, do not necessarily reflect the location of the end users of our products as many of our products are incorporated into mountain bikes that are assembled at international locations and then shipped back to the United States. We estimate, based on our internal projections, that approximately one-third of the end users of our products are located outside the United States.

Opportunities, Challenges and Risks

We intend to focus on generating sales of our high-performance suspension products through OEMs and in the aftermarket channel. To do this, we intend to continue to develop and introduce new and innovative products in our current end-markets and we intend to selectively develop products for applications and end-markets in which we do not currently participate. Currently, virtually all of our sales are dependent on the demand for high-performance suspension products. While we have recently introduced a new non-suspension product (our adjustable seat post for mountain bikes), this product comprised less than 1% of our sales in 2013. We may not achieve the desired level of sales for this product or for other new products that we introduce in the future.

Our aftermarket distribution network currently consists of more than 2,500 retail dealers and distributors worldwide. To further penetrate the aftermarket channel, we intend to selectively add additional dealers and distributors in certain geographic markets, expand our internal sales force and strategically increase the number of aftermarket specific products and services which we offer for existing vehicle platforms. In addition, we believe international expansion represents a significant opportunity for us and we intend to selectively increase infrastructure investments and focus on identified geographic regions.

As a supplier to OEM customers, we are largely dependent on the success of the business of our OEM customers. Model year changes by our OEM customers may adversely impact our sales or cause our sales to vary from quarter to quarter. Losses in market share or a decline in the overall market of our OEM customers or the discontinuance by our OEM customers of their products which incorporate our products could negatively impact our business and our results of operations.

 

30


Table of Contents

We have begun the process of transitioning a majority of the manufacturing of our mountain bike products to our facility in Taiwan and we contemplate that this transition will continue through 2015. We anticipate that this transition, when completed, will enable us to shorten production lead times to our mountain bike OEM customers, improve supply chain efficiencies and reduce our manufacturing costs. We also believe that this transition, once completed, will improve operating margins in the medium to long term. However, in the short term during this transition process we expect to incur some duplication of facilities, equipment and personnel which will increase our costs and could vary materially from our projections. In addition, this transition process could cause manufacturing problems and give rise to execution risks which could negatively impact our business, financial condition or results of operations.

From time to time we have experienced, and may continue to experience, warranty costs and claims relating to our products. In the ordinary course of business we reserve against such costs and claims in our financial statements. There is a risk, however, that in the future we will experience higher than expected warranty costs and claims, as well as other related costs.

We intend to evaluate selective potential acquisition opportunities for high-performance products and technologies that we believe will help us extend our ride dynamics product platform. Any acquisitions that we might make are subject to various risks and uncertainties and could have a negative impact on our results of operations.

Basis of Presentation

Sales are comprised of:

Sales from:

 

    Product sales: consists of sales of products sold primarily to our OEM and aftermarket customers. We recognize revenue when products are shipped, title has transferred, collection of the receivable is reasonably assured, persuasive evidence of an arrangement exists, and the sales price to our customers is fixed or determinable;

 

    Service sales: consists of sales of service related repair work and the associated sale of products. We recognize revenue when service products are shipped, title has transferred, collection of the receivable is reasonably assured, persuasive evidence of an arrangement exists, and the sales price to our customers is fixed or determinable;

 

    Royalty income: consists of licensing fees and royalties earned by us from contractual relationships we have with third parties that allow them to use our intellectual property in return for fees. We recognize royalty income when collection of the receivable is reasonably assured, persuasive evidence of an arrangement exists, and generally upon the reporting of royalties by the licensee; and

 

    Shipping and handling fees: we include shipping and handling fees billed to customers in sales.

Net of:

 

    Sales returns allowances: consists of an estimate of our sales returns. This allowance is based upon estimates of the projected returns in future periods based on our experience with returns recorded in previous periods; and

 

    Rebates: consists of incentives we provide to customers based on sales of eligible products.

We attribute our past growth in sales predominantly to increases in the number of units sold to our OEM customers in both our mountain bike and powered vehicle product categories. To a lesser degree, increases in our average sales prices have also contributed to our past sales growth, as we have introduced innovations to and improved the functionality of many of our products, which enabled us, in many cases, to increase our sale prices for such products.

Cost of sales

The cost of sales includes the cost of manufactured products (raw materials consumed, the cost to procure materials, labor costs, including wages, and employee benefits, and factory overhead to produce finished good products), including:

 

    the cost to inspect and repair products;

 

    shipping costs associated with inbound freight. These costs are capitalized as part of inventory and included in cost of sales as the inventory is sold;

 

    royalty expenses, including payments to certain parties for our use of licensed technology incorporated into our products;

 

    freight expense incurred for certain shipments to customers, excluding customers who pay for their own freight;

 

31


Table of Contents
    warranty costs associated with the repair or replacement of products under warranty; and

 

    reductions in the cost of inventory to its net realizable value, if required, for estimated excess, obsolescence or impaired balances.

Gross profit/gross margin

Our gross profit equals our sales minus cost of sales. Our gross margin measures our gross profit as a percentage of sales.

Our gross margins fluctuate based on product, customer and channel mix as certain of our products are sold at higher gross margins than others. Generally, we earn higher gross margins on our products sold to the aftermarket channel and we typically earn lower gross margins on the products we sell to OEMs. We are pursuing several initiatives, which are designed to improve our operating efficiencies, and improve margins in the coming years as compared to our historical results. However, some of this improvement will be partially offset in the short term by duplicative costs we expect to incur as a result of our planned transition of a majority of the manufacturing of our mountain bike products to our operations in Taiwan.

Operating expenses

Our operating expenses consist of the following:

 

    sales and marketing;

 

    research and development;

 

    general and administrative; and

 

    amortization of purchased intangibles.

Our sales and marketing expenses include costs related to our sales, customer service and marketing personnel, including their wages, employee benefits and related stock-based compensation, and occupancy related expenses. Other significant sales and marketing expenses include race support and sponsorships of events and athletes, advertising and promotions related to trade shows, travel and entertainment, and promotional materials, products and our sales offices costs.

Our research and development expenses consist primarily of salaries and personnel costs, including wages, employee benefits and related stock-based compensation for our engineering, research and development teams, occupancy related expenses, fees for third party consultants, service fees, and expenses for prototype tooling and materials, travel, and supplies. We expense research and development costs as incurred and such costs are included as research and development expenses on our consolidated statements of income.

Our general and administrative expenses include costs related to our executive, finance, information technology, human resources and administrative personnel, including wages, employee benefits and related stock-based compensation expenses. We record professional and contract service expenses, occupancy related expenses associated with corporate locations and equipment, and legal expenses in general and administrative expenses.

Our amortization of intangibles includes amortization over their respective useful lives of our purchased intangible assets, such as customer lists and our core technology. Our intangible assets, the substantial majority of which were established as a result of our Sponsor’s acquisition of us in 2008, are evaluated for impairment whenever events or changes in circumstances indicate that the carrying value of the assets may not be fully recoverable. No impairments of intangible assets were identified in the years ended December 31, 2013, 2012 and 2011, respectively.

In the near term, we anticipate that our general and administrative expenses will increase both in terms of absolute dollars and when expressed as a percentage of sales as we incur additional expenses, including those associated with being a public company. In the long term, we generally anticipate that our sales and marketing, and research and development expenses will increase in terms of absolute dollars, but we anticipate these expenses, excluding stock-based compensation expenses, should remain relatively constant when expressed as a percentage of our sales. We can give no assurance that these expectations will be realized.

Income from operations

We define income from operations as gross profit less our operating expenses. We use income from operations as an indicator of the profitability of our business and our ability to manage costs.

 

32


Table of Contents

Other expense, net

Other expense, net consists of interest expense and other income (expense), net. Interest expense consists of interest charged to us under our credit facilities.

Other income (expense), net consists of gains and losses on the disposal of fixed assets, foreign currency transaction gains and losses, forgiveness of indebtedness under our loan with the Redevelopment Agency of the City of Watsonville, and other miscellaneous items.

Income taxes

We are subject to income taxes in the United States and various other foreign jurisdictions in which we do business. Some of these foreign jurisdictions have higher statutory tax rates than those in the United States, and certain of our international earnings are also taxable in the United States. Accordingly, our effective tax rates will vary depending on the relative proportion of foreign to U.S. income and absorption of foreign tax credits, changes in the valuation of our deferred tax assets and liabilities and changes in tax laws. In addition, we are subject to examination of our income tax returns by the U.S. Internal Revenue Service, or IRS, and other tax authorities. We regularly assess the likelihood of adverse outcomes resulting from these examinations to determine the adequacy of our income tax liabilities and expense. Should actual events or results differ from our current expectations, charges or credits to our income tax liabilities and income tax expense may become necessary. Any such adjustments could have a significant impact on our results of operations.

Under U.S. generally accepted accounting principles, or GAAP, an uncertain income tax position will not be recognized unless it has a greater than 50% likelihood (i.e., more-likely-than-not) of being sustained and then, measured only to the largest amount of benefit that is greater than 50% likely to be realized upon ultimate settlement. We established liabilities for uncertain tax positions and deferred taxes associated with the deductibility of certain amortization and depreciation expenses. The liability for uncertain income tax positions represents the amount of tax we would be required to pay if certain tax deductions previously claimed on tax returns were not allowed upon examination by the taxing authorities. The liability for deferred taxes represents additional taxes that would be payable in future periods because of the potential non-deductibility of future amortization and depreciation expenses.

As of December 31, 2013, our balance sheet reflected a liability for unrecognized tax benefits of $7.8 million. The unrecognized tax benefits are primarily due to the uncertainty of the deductibility of amortization and depreciation expenses which were incurred as a result of our Sponsor’s acquisition of us in 2008. In addition, as of December 31, 2013, our balance sheet reflected a related deferred tax liability of $10.6 million based on the difference between the financial statement and tax basis of certain assets, which represents the amount of tax we would be required to pay in the future based on the current enacted tax rates if the tax deductions associated with this amortization and depreciation were not claimed and allowed on our income tax returns. This deferred tax liability will decrease each year we expense the associated amortization and depreciation for accounting purposes. However, this reduction is not anticipated to be associated with actual cash payments. We expect to decrease our liability for unrecognized tax benefits and recognize a reduction in income tax expense (and an increase in net income) because of the expiration of statutes of limitations in the amount of approximately $1.6 million in the third quarter of 2014. However, reductions in the related deferred tax liability will over time be associated with offsetting increases to our liability for unrecognized tax benefits. We generally expect to recognize a reduction in income tax expense (and an increase in net income) through the expiration of statutes of limitations in the amount of approximately $1.4 to $1.5 million in each third quarter from 2014 through 2027 and approximately $0.1 to $0.3 million in each fourth quarter from 2014 through 2028. These annual reductions in our income tax expense will cease if it is determined upon examination of the tax authorities that the deductions are not valid and the liabilities for the uncertain income tax position and the associated deferred tax liability will have to be settled for cash. If we subsequently determine that we have met the more-likely-than-not threshold that these deductions will be sustained, the balance of the liability for unrecognized tax benefits that would be recognized as a reduction of income tax expense, except for approximately $1.0 million, which would increase the deferred tax liability to the extent of taxes associated with tax amortization of intangibles with indeterminate lives, and the related unamortized deferred tax liabilities will be recognized as a one-time income tax benefit.

Income taxes are computed using the asset and liability method, under which deferred tax assets and liabilities are determined based on the difference between the financial statement and tax bases of assets and liabilities using enacted tax rates in effect for the year in which the differences are expected to affect taxable income. Valuation allowances are established when necessary to reduce deferred tax assets to the amount expected to be realized. As of December 31, 2013, we did not have any valuation allowances recorded, as we expect to fully utilize all of our deferred tax assets, and we did not have any net operating loss or tax credit carry-forwards. For the years ended December 31, 2013, 2012 and 2011, we had effective tax rates of 30.5%, 36.5% and 34.3%, respectively. We anticipate that our effective tax rate in 2014 will be slightly more than our effective tax rate for 2013 and that in the medium term our effective annual tax rates should be approximately 34% to 36%, however our actual effective annual tax rates will vary based on several factors, including the geographic mix of our sales, changes in future tax rates, and the treatment of the unrecognized tax benefits mentioned above.

 

33


Table of Contents

Results of operations

The table below summarizes our results of operations for the fiscal years ended December 31, 2013, 2012 and 2011.

 

     Years Ended December 31,  

(in thousands)

   2013     2012     2011  

Sales

   $ 272,746      $ 235,869      $ 197,739   

Cost of sales

     192,617        173,040        140,849   
  

 

 

   

 

 

   

 

 

 

Gross profit

     80,129        62,829        56,890   
  

 

 

   

 

 

   

 

 

 

Operating expenses:

      

Sales and marketing

     14,153        12,570        11,748   

Research and development

     10,409        9,727        9,750   

General and administrative

     11,408        9,063        7,588   

Amortization of purchased intangibles

     5,378        5,315        5,217   
  

 

 

   

 

 

   

 

 

 

Total operating expenses

     41,348        36,675        34,303   
  

 

 

   

 

 

   

 

 

 

Income from operations

     38,781        26,154        22,587   
  

 

 

   

 

 

   

 

 

 

Other expense, net:

      

Interest expense

     (4,125 )     (3,486 )     (1,982 )

Other income (expense), net

     12        (277 )     (13 )
  

 

 

   

 

 

   

 

 

 

Total other expense, net

     (4,113 )     (3,763 )     (1,995 )
  

 

 

   

 

 

   

 

 

 

Income before income taxes

     34,668        22,391        20,592   

Provision for income taxes

     10,566        8,181        7,054   
  

 

 

   

 

 

   

 

 

 

Net income

   $ 24,102      $ 14,210      $ 13,538   
  

 

 

   

 

 

   

 

 

 

The following table sets forth our gross profit as well as our operating and other income and expenses and other information for the periods presented, expressed as a percentage of total revenues.

 

                                            
     Years Ended December 31,  
     2013     2012     2011  

Sales

     100.0 %     100.0 %     100.0 %

Cost of sales

     70.6        73.4        71.2   
  

 

 

   

 

 

   

 

 

 

Gross profit

     29.4        26.6        28.8   
  

 

 

   

 

 

   

 

 

 

Operating expenses:

      

Sales and marketing

     5.2        5.3        6.0   

Research and development

     3.8        4.1        4.9   

General and administrative

     4.2        3.8        3.8   

Amortization of purchased intangibles

     2.0        2.3        2.6   

Total operating expenses

     15.2        15.5        17.3   
  

 

 

   

 

 

   

 

 

 

Income from operations

     14.2        11.1        11.5   
  

 

 

   

 

 

   

 

 

 

Other expense, net:

      

Interest expense

     (1.5 )     (1.6 )     (1.0 )

Other income (expense), net

     *        *        *   
  

 

 

   

 

 

   

 

 

 

Total other expense, net

     (1.5 )     (1.6 )     (1.0 )
  

 

 

   

 

 

   

 

 

 

Income before income taxes

     12.7        9.5        10.5   

Provision for income taxes

     3.9        3.5        3.6   
  

 

 

   

 

 

   

 

 

 

Net income

     8.8 %     6.0 %     6.9 %
  

 

 

   

 

 

   

 

 

 

 

* Represents less than 0.1%

 

34


Table of Contents

Year ended December 31, 2013 compared to year ended December 31, 2012

Sales

Sales for 2013 increased approximately $36.9 million, or 15.6%, compared to 2012. Sales of mountain bike and powered vehicle products increased 14.4% and 18.2%, respectively, for 2013 compared to 2012. Sales growth was primarily driven by sales to OEMs which increased $30.0 million to $219.9 million for 2013 compared to $189.9 million for 2012. The increase in sales to OEMs was largely driven by increased specification, or spec, positions with our OEM customers. The remaining increase in sales totaling $6.9 million reflects increased sales to aftermarket customers in 2013 compared to 2012. The increase in sales to aftermarket customers is primarily due to higher end user demand for our products.

Cost of sales

Cost of sales for 2013 increased by $19.6 million, or 11.3% compared to the same period in 2012. The increase in cost of sales was primarily due to increased sales in 2013 when compared to 2012. For 2013 our gross margin was 29.4% compared to 26.6% for the same period in 2012. We attribute 1.6% of the improvement in our gross profit margin to our cost initiatives designed to improve our operating efficiencies. The remaining 1.2% of the improvement is largely due to additional warranty and other related costs in 2012 to upgrade certain dampers contained in our suspension products which costs did not recur in 2013.

Operating expenses

Operating expenses for 2013 increased by $4.7 million, or 12.7 %, compared to 2012. When expressed as a percentage of sales, operating expenses declined to 15.2% of sales for 2013 compared to 15.5 % of sales in 2012.

Within operating expenses, our sales and marketing expenses increased by $1.6 million from $12.6 million in 2012 to $14.2 million in 2013 primarily due to increases of personnel related expenditures of $1.0 million and other marketing related expenses of $0.6 million. Our sales and marketing goal is to expand our brand image which largely focuses on additional race sponsorships and corporate media.

Our research and development expenses increased by $0.7 million from $9.7 million in 2012 to $10.4 million in 2013. The primarily increase, of $0.6 million was due to bringing on board talented and innovative personnel, and other expenses of $0.2 million, partially offset by a decrease in other product development expenses of $0.1 million.

Our general and administrative expenses increased by $2.3 million from $9.1 million in 2012 to $11.4 million in 2013. The increase was primarily related to employee compensation of $1.1 million due to an increase in personnel and the additional costs we incurred as a result of being a public company. Stock compensation expenses increased by $0.4 million, $0.3 million of additional expenses related to the acquisition and integration of our third party Germany-based distributor and service center and an increase of $0.5 million of other general and administrative expenses.

Amortization of purchased intangible assets increased by $0.1 million in 2013 compared to 2012 due to the intangible assets from recently acquired intellectual property.

Income from operations

Income from operations for 2013 increased $12.6 million, or 48.3%, compared to income from operations in 2012. The increase in income from operations was primarily the result of our increase in gross profit of $17.3 million, partially offset by our increases in operating expenses of $4.7 million.

 

35


Table of Contents

Other expense, net

Other expense, net for 2013 increased by $0.3 million to $4.1 million in 2013 compared to $3.8 million in 2012. Within Other expense, net, interest expense increased in 2013 by $0.6 million primarily due to a $1.4 million non-cash charge for unamortized loan origination costs in connection with the termination of our Prior Credit Facility, offset by decreased average borrowings under our credit facilities. Other income (expense), net for 2013 increased approximately $0.3 million from 2012 due to the loss on the disposition of fixed assets in 2012, which did not reoccur in 2013.

Income tax expense

Income tax expense for 2013 increased by $2.4 million to $10.6 million compared to income tax expense of $8.2 million in 2012. Effective tax rates were 30.5% and 36.5% for 2013 and 2012, respectively. The decrease in the effective tax rates for 2013 was caused by the expiration of the statute of limitations that allowed us to release a liability for unrecognized tax benefits relating to the uncertainty of amortization and depreciation expenses which were a result of Compass’ acquisition of us in 2008 and also was result of a reinstatement of the federal research and development credit that had lapsed in 2012.

Net income

As a result of the factors discussed above, our net income increased $9.9 million, or 69.6%, to $24.1 million in 2013 from $14.2 million in 2012.

Year ended December 31, 2012 compared to year ended December 31, 2011

Sales

Sales for the year ended December 31, 2012 increased $38.1 million, or 19.3%, compared to 2011. Sales of mountain bike and powered vehicle products increased 16.2% and 26.1%, respectively, in 2012 compared to 2011. Sales growth was primarily driven by sales to OEMs which increased $32.0 million to $189.9 million during the year ended December 31, 2012 compared to $157.9 million for the same period in 2011. The increase in sales to OEMs was largely driven by increased specification, or spec, positions with our OEM customers and, to a lesser degree, by increased sales on vehicle models where our products had previously been specified in prior years. The remaining increase in sales totaling $6.1 million reflects increased sales to aftermarket customers in the year ended December 31, 2012 compared to 2011. The increase in sales to aftermarket customers is due to higher end user demand for our products.

Cost of sales

Cost of sales for the year ended December 31, 2012 increased $32.2 million, or 22.9% compared to 2011. The increase in cost of sales in absolute dollars was primarily due to increased sales during 2012 when compared to the prior year. For the year ended December 31, 2012 our gross margin was 26.6% compared to 28.8% for the same period in 2011. Several factors contributed to the 2.2% decrease in gross margin in 2012, including an aggregate of $2.8 million in the year for higher warranty related costs for upgrades to our dampers contained in our suspension products, which costs included a $1.8 million increase in our warranty reserve to replace these dampers and $1.0 million in other warranty related costs. In addition, due to increases in customer orders above the amounts forecasted, we incurred $1.7 million of incremental expedited in-bound freight costs related to products sold to customers. The other material factors contributing to the margin decrease in 2012 included increased overhead costs of $0.9 million associated with consolidating our Watsonville operations and increased costs of $1.1 million associated with expanding our operations in Taiwan.

Operating expenses

Operating expenses for the year ended December 31, 2012 increased $2.4 million, or 6.9%, over 2011. When expressed as a percentage of sales, operating expenses declined to 15.5% of sales for the year ended December 31, 2012 compared to 17.3% of sales in 2011.

Within operating expenses, our sales and marketing expenses increased in 2012 by $0.8 million to $12.6 million from $11.7 million in 2011 primarily due to increases of personnel related expenditures for new hires of $0.6 million, and increased expenditures for marketing and business travel and supplies, equipment and services of $0.2 million.

Our research and development expenses were essentially unchanged in 2012 compared to 2011 as increases in personnel related expenses for additional employees of $0.2 million and additional expenses for projects and prototypes and other expenses of $0.3 million were offset by a reduction of $0.5 million in third party consulting fees.

Our general and administrative expenses increased in 2012 by $1.5 million to $9.1 million from $7.6 million in 2011, primarily due to increased levels of personnel related expenses of $1.4 million, which was primarily due to stock compensation expenses of $1.0 million. In addition, there were increases in general corporate overhead in 2012 of $0.1 million.

 

36


Table of Contents

Amortization of purchased intangible assets increased by $0.1 million due to the acquisition of intellectual property.

Income from operations

Income from operations for the year ended December 31, 2012 increased $3.6 million, or 15.8%, compared to income from operations in 2011. The increase in income from operations was primarily the result of our increased sales in 2012 compared to 2011, which was partially offset by the increases in cost of sales and operating expenses described above.

Other expense, net

Other expense, net for the year ended December 31, 2012 increased by $1.8 million to $3.8 million in 2012 compared to $2.0 million of other expense, net in 2011. Within other income (expense), interest expense increased in 2012 by $1.5 million due primarily to increased average borrowings under our Existing Credit Facility. In addition, other expenses, net increased in 2012 by $0.3 million primarily due to a loss on the disposal of assets which were no longer needed.

Income tax expense

Income tax expense for the year ended December 31, 2012 increased by $1.1 million to $8.2 million compared to income tax expense of $7.1 million in 2011. Effective tax rates were 36.5% and 34.3% for 2012 and 2011, respectively. The increase in the effective tax rates for 2012 was primarily caused by the December 31, 2011 expiration of the ability to generate additional federal research and development credit. As of December 31, 2012, this credit had lapsed, although it has been subsequently extended.

Net income

As a result of the factors discussed above, our net income increased $0.7 million, or 5.2%, to $14.2 million in 2012 from $13.5 million for 2011.

Liquidity and capital resources

Our primary cash needs are to support working capital and capital expenditures. We have generally financed our historical needs with operating cash flows and borrowings under our credit facilities. These sources of liquidity may be impacted by fluctuations in various matters, including demand for our products, investments made by us in our plant and equipment and other capital expenditures, and expenditures on general infrastructure and intellectual technology. A summary of our operating, investing and financing activities are shown in the following table:

 

     Years ended December 31,  
(in thousands)    2013     2012     2011  

Net cash provided by operating activities

   $ 22,619      $ 17,367      $ 21,038   

Net cash used in investing activities

     (5,042 )     (5,761 )     (3,056 )

Net cash used in financing activities

     (15,907 )     (11,705 )     (18,370 )

Effect of exchange rate on cash

     (2     —          —     
  

 

 

   

 

 

   

 

 

 

Increase (decrease) in cash and cash equivalents

   $ 1,668      $ (99 )   $ (388 )
  

 

 

   

 

 

   

 

 

 

We expect that cash on hand, cash flow from operations and availability under our credit facilities will be sufficient to fund our operations for at least the next 18 months from the date of this Annual Report.

Net cash provided by operating activities

Cash provided by operating activities primarily consists of net income, adjusted for certain non-cash items including provision for doubtful accounts receivable (including product returns and cash discounts), depreciation and amortization, stock-based compensation, deferred income taxes, amortization of loan costs and the effect of changes in working capital and other activities.

In 2013, cash provided by operating activities was $22.6 million and consisted of net income of $24.1 million plus non-cash items totaling $8.7 million less changes in operating assets and liabilities and other adjustments totaling $10.2 million. Non-cash items and other adjustments consisted primarily of depreciation and amortization of $7.8 million, stock-based compensation of $2.5 million, a write off of unamortized loan origination costs of $1.4 million, a $3.2 million change in deferred taxes and amortization of loan fees of $0.3 million. Cash used related to operating assets and liabilities consisted primarily of an increase in accounts receivable of $8.5 million, an increase in inventory of $7.4 million, partially offset by an increase in accounts payable of $3.6 million and an increase in accrued expenses of $2.3 million, primarily due to the increase level of business. Additionally, there was an increase in prepaid expenses and other current assets of $0.4 million and $0.5 million in income tax receivable.

 

37


Table of Contents

In 2012, cash provided by operating activities was $17.4 million and consisted of net income of $14.2 million plus non-cash items totaling $1.1 million plus changes in operating assets and liabilities and other adjustments totaling $2.0 million. Non-cash items and other adjustments consisted primarily of depreciation and amortization of $7.2 million, stock-based compensation of $2.1 million, amortization of loan fees of $0.4 million and loss on sale of assets of $0.3 million, partially offset by the excess tax benefit from the exercise of stock options of $5.8 million and a deferred income tax benefit of $3.2 million. Cash used in operating assets and liabilities consisted primarily of an increase in accounts receivable of $7.0 million as a result of increased sales volume, an increase in prepaid expenses and other current assets of $0.5 million, and an increase in inventory of $4.7 million related to increased sales and components for new products, partially offset by an increase in accounts payable of $3.0 million, an increase in accrued expenses of $2.8 million, in each case largely related to the increase in sales, and an increase in income taxes receivable and deferred rent of $7.9 million and $0.7 million, respectively.

In 2011, cash provided by operating activities was $21.0 million and consisted of net income of $13.5 million plus non-cash items totaling $5.5 million plus changes in operating assets and liabilities and other adjustments totaling $2.0 million. Non-cash items and other adjustments consisted primarily of depreciation and amortization of $6.6 million and stock-based compensation of $1.0 million, and amortization of loan fees of $2.0 million, partially offset by a deferred income tax benefit of $2.4 million. Cash used in operating assets and liabilities consisted primarily of increases in accounts receivable of $1.2 million, prepaid expenses and other current assets of $0.8 million and an increase in inventory of $1.5 million, partially offset by an increase in accounts payable of $0.6 million, an increase in accrued expenses of $2.1 million and an increase in income taxes receivable of $2.7 million.

Net cash used in investing activities

Cash used in investing activities primarily relates to purchases by us of property and equipment and investments in our manufacturing and general infrastructure.

In 2013, 2012 and 2011, cash used in investing activities was $5.0 million, $5.8 million and $3.1 million, respectively. In 2013, cash used in investing activities consisted primarily of purchases of property and equipment of $3.9 million and the cash paid at closing of $1.1 million related to our acquisition of our third party distributor. In 2012, cash used in investing activities consisted primarily of purchases of property and equipment of $4.9 million, and an acquisition of an intangible asset consisting of patents related to bicycle suspension technology for $0.8 million. In 2011, cash used in investing activities consisted primarily of purchases of property and equipment. We estimate that our capital expenditures for 2014 will be approximately $5.8 million to $6.8 million, primarily related to investments in our manufacturing- and general infrastructure and expenditures for our operations in Taiwan.

Net cash used in financing activities

In 2013, net cash used in financing activities was $15.9 million, which consisted primarily of net payments on the Prior Credit Facility of $59.3 million partially offset by net proceeds from the IPO of $36.1 million and net borrowings of $7.2 million from the 2013 Credit Facility. Net cash used in financing activities was $11.7 million in 2012 compared to $18.4 million in 2011. The decrease in net cash used in financing activities was partially attributable to our recapitalization in 2012.

Credit facility

Concurrently with the closing of our IPO in August 2013 we used the net proceeds that we received from the offering to repay a portion of the then outstanding indebtedness under our Prior Credit Facility. In addition, in connection with the IPO in August 2013 we entered into our 2013 Credit Facility and borrowed $28.5 million thereunder. Of such borrowings, $21.6 million was used to repay the Company’s remaining indebtedness that was then due under the Prior Credit Facility and the Prior Credit Facility was terminated, and the remaining amount of such borrowings was used to pay IPO related fees and expenses and to provide additional working capital.

The 2013 Credit Facility consists of a $60.0 million revolving line of credit, including a $5.0 million sublimit for swingline loans, and a $10.0 million sublimit for the issuance of standby letters of credit. The maximum amount we are permitted to borrow under the revolving line of credit is subject to certain borrowing limitations. Subject to the satisfaction of certain conditions precedent, we have the ability to increase the aggregate revolving loan commitments under the 2013 Credit Facility by an aggregate amount of up to $50.0 million, subject to the agreement of any existing lenders and/or any additional lenders who are providing such increased commitments. Amounts borrowed under the 2013 Credit Facility bear interest at a rate based on the London Interbank Offered Rate, or LIBOR, plus a margin ranging from 1.50% to 2.50%, or based on the prime rate offered by SunTrust Bank plus a margin ranging from 0.50% to 1.50%. The lenders’ commitments to make revolving loans under the 2013 Credit Facility terminate in August 2018.

The 2013 Credit Facility is secured, subject to permitted liens and other agreed upon exceptions, by a first-priority lien on and perfected security interest in substantially all of our and our subsidiary’s assets including accounts receivable and a pledge of the equity in our operating subsidiary. In addition, the 2013 Credit Facility requires that we satisfy a maximum total leverage ratio and a fixed charge coverage ratio. The 2013 Credit Facility contains customary representations and warranties and customary events of default, as well as certain affirmative and negative covenants, including restrictions on: indebtedness; liens; mergers, consolidations

 

38


Table of Contents

and acquisitions; sales of assets; engaging in business other than our current business and those reasonably related thereto; investments; dividends; redemptions and distributions; affiliate transactions; and other restrictions. As of December 31, 2013, the outstanding borrowings under our 2013 Credit Facility were $8.0 million and we had $52.0 million available to borrow pursuant to the 2013 Credit Facility. As of December 31, 2013, the Company was in compliance with the covenants contained in the 2013 Credit Facility.

Contractual obligations and commitments

As of December 31, 2013, we had the following contractual obligations (in thousands):

 

Payments due by period

   Total      Less than
1 year
     1-3
years
     4-5
years
     After
5 years
 

Long-term borrowings

   $ 8,000       $ —         $ —         $ 8,000       $ —     

Operating lease obligations

     10,999         3,030         5,315         2,654         —     

Purchase obligations and other

     3,458         3,458         —           —           —     
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total

   $ 22,457       $ 6,488       $ 5,315       $ 10,654       $ —     
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Seasonality

Our business is slightly seasonal. In each of the last three fiscal years, our quarterly sales have been the lowest in the first quarter and the highest during our third quarter of the year. For example, our sales in our first and third quarters of 2013 represented 20% and 30% of our total sales for the year, respectively. We believe this seasonality is due to the delivery of new products containing our suspension products related to the new mountain bike season for each year. We also believe that the seasonal nature of our business may have been overshadowed over each of the past few years due to the rapid growth in sales we have experienced during the same periods.

Off-balance sheet arrangements

We have no material off-balance sheet arrangements.

Inflation

Historically, inflation has not had a material effect on our results of operations. However, significant increases in inflation, particularly those related to wages and increases in the cost of raw materials could have an adverse impact on our business, financial condition and results of operations.

Critical accounting policies and estimates

Our consolidated financial statements are prepared in accordance with GAAP. The preparation of these consolidated financial statements requires us to make estimates, judgments, and assumptions that affect the reported amounts of assets, liabilities, sales, expenses and related disclosures. We evaluate our estimates, judgments, and assumptions on an ongoing basis. Our estimates are based on historical experience and various other assumptions that we believe to be reasonable under the circumstances. Our actual results could differ from these estimates.

We believe that the assumptions, judgments, and estimates associated with the following have the greatest potential impact on, and are critical to the understanding of, our results of operations: revenue recognition, provision for doubtful accounts receivable, inventory, goodwill and intangible assets, warranty, income taxes and stock-based compensation. For further information on all of our significant accounting policies, please see Note 1 of the accompanying notes to our Consolidated Financial Statements.

We are an “emerging growth company” within the meaning of the rules under the Securities Act, and we will utilize certain exemptions from various reporting requirements that are applicable to public companies that are not emerging growth companies. For example, we do not have to provide an auditor’s attestation report on our internal controls in our annual reports on Form 10-K as otherwise required by Section 404(b) of the Sarbanes-Oxley Act. In addition, Section 107 of the JOBS Act provides that an emerging growth company can utilize the extended transition period provided in Section 7(a)(2)(B) of the Securities Act for complying with new or revised accounting standards. Thus, an emerging growth company can delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. We have irrevocably elected to opt out of the extended transition period for complying with new or revised accounting standards pursuant to Section 107(b) of the JOBS Act. As a result, we will comply with new or revised accounting standards on the relevant dates on which adoption of such standards is required for non-emerging growth companies.

 

39


Table of Contents

Revenue recognition

We recognize sales when persuasive evidence of an arrangement exists, title has transferred, the sales price is fixed or determinable, and collectability of the receivable is reasonably assured. Provisions for discounts, rebates, sales incentives, returns, and other adjustments are provided for in the period the related sales are recorded based on management’s assessment of historical trends and projection of future results. Sales are recorded net of sales tax.

Allowance for doubtful accounts

We record a provision for doubtful accounts deemed not collectable based on historical experience and a detailed assessment of the collectability of our accounts receivable. In estimating the allowance for doubtful accounts, we consider, among other factors, the aging of the accounts receivable, historical write-offs, and the credit-worthiness of each customer. If circumstances change, such as higher-than-expected defaults or an unexpected material adverse change in a major customer’s ability to meet its financial obligations, we estimate if the recoverability of the amounts due could be reduced by a material amount.

Inventories

Inventories are stated at the lower of standard cost (which generally approximates actual costs on a first-in first-out basis) or market. Cost includes raw materials, direct labor and manufacturing overhead. Market value is based on current replacement cost for raw materials and on a net realizable value for finished goods. Adjustments to reduce the cost of inventory to its net realizable value are made, if required, for estimated excess, obsolescence or impaired balances.

We regularly monitor inventory quantities on hand and on order and record write-downs for excess and obsolete inventories based on our estimate of the demand for our products, potential obsolescence of technology, product life cycles, and when pricing trends or forecasts indicate that the carrying value of inventory exceeds our estimated selling price. These factors are affected by market and economic conditions, technology changes, and new product introductions and require estimates that may include elements that are uncertain. Actual demand may differ from forecasted demand and may have a material effect on our gross margin. If inventory is written down, a new cost basis will be established that cannot be increased in future periods.

Goodwill, intangible assets and long-lived assets

Goodwill

Goodwill represents the excess of purchase price over the fair value of the net assets of businesses acquired. Annually, we either make a qualitative assessment prior to proceeding to step one of the annual goodwill impairment test or perform a two-step impairment test. If we make a qualitative assessment and it determines that the fair value of the reporting unit is less than its carrying amount, we would perform step one of the annual goodwill impairment test and, if necessary, proceed to step two. Otherwise, no further evaluation is necessary. For the two-step impairment test, in the first step, we compare the fair value of the reporting unit to its carrying value, including goodwill. We determine the fair value of the reporting unit based on a weighting of income and market approaches. If the fair value of the reporting unit exceeds the carrying value of the net assets assigned to that unit, goodwill is not impaired and no further testing is performed. If the carrying value of the net assets assigned to the reporting unit exceeds the fair value of the reporting unit, then we perform the second step of the impairment test in order to determine the implied fair value of the reporting unit’s goodwill. Impairments, if any, are charged directly to earnings. We have a single reporting unit for purposes of assessing goodwill impairment. We completed our most recent annual impairment test in the second quarter of 2013. No impairment charges have been incurred to date.

Indefinite-lived intangible assets

Trademarks are considered to be indefinite life intangibles, and are not amortized but are subject to testing for impairment annually.

Finite-lived intangible assets

We assess the impairment of identifiable finite-lived intangible assets whenever events or changes in circumstances indicate that an asset group’s carrying amount may not be recoverable. Recoverability of certain finite-lived intangible assets, particularly customer relationships and core technology, would be measured by a comparison of the carrying amount of the asset group to which the assets are assigned to the sum of the undiscounted estimated future cash flows the asset group is expected to generate. If the asset is considered to be impaired, the amount of such impairment would be measured by the difference between the carrying amount of the asset and its fair value. Recoverability and impairment of other finite-lived intangible assets, particularly developed technology and patents, would be measured by the comparison of the carrying amount of the asset to the sum of undiscounted estimated future product revenues offset by estimated future costs to dispose of the product to which the asset relates. No impairment charges have been incurred to date.

 

40


Table of Contents

Warranty

Unless otherwise required by law, we generally provide limited warranties on our products for one to two years. We accrue estimated costs related to warranty activities as a component of cost of sales upon product shipment or when information becomes available indicating that an adjustment to the warranty reserves is appropriate. Management estimates are based upon historical and projected product failure rates and historical costs incurred in correcting product failures. The warranty reserve is assessed from time to time for adequacy and adjusted as necessary. Actual warranty expenses are charged against our estimated warranty liability when incurred. Factors that affect our liability include the number of units, historical and anticipated rates of warranty claims, and the cost per claim. An increase in warranty claims or the related costs associated with satisfying these warranty obligations could increase our cost of sales and negatively affect our operating results.

Income taxes

We record our income tax expenses or benefits in each federal, state and foreign jurisdiction in which we operate using an asset and liability approach. This process requires that we compute the current tax expense or benefit and deferred tax expense or benefit, which result from changes in temporary differences between the accounting and tax treatment of assets and liabilities, including items such as accruals and allowances, which are recorded in different periods for financial statement and income tax return purposes. The income tax effects of these differences we identify are classified as current or long-term deferred tax assets and liabilities in our consolidated balance sheets. Our judgments, assumptions, and estimates relative to the current provision for income taxes take into account enacted tax laws, our interpretation of enacted tax laws, and possible outcomes of current and future audits conducted by tax authorities. Changes in tax laws or our interpretation of tax laws and the resolution of current and future tax audits could significantly impact the amounts provided for income taxes in our consolidated balance sheets and consolidated statements of income. Interest and penalties associated with income taxes are recorded as income tax expense in our consolidated statements of income.

We account for uncertain tax positions on a two-step approach to recognize and measure those positions taken or expected to be taken in a tax return. The first step is to determine if the weight of available evidence indicates that it is more likely than not that the tax position will be sustained on audit, including resolution of any related appeals or litigation processes. The second step is to measure the tax benefit as the largest amount that is more than 50% likely to be realized upon ultimate settlement. We adjust liabilities for our uncertain tax positions due to changing facts and circumstances, such as the closing of a tax audit, expiration of a statute of limitations for assessment of income tax, the refinement of estimates, or the realization of earnings or deductions that differ from our estimates. To the extent that the final outcome of these matters is different than the amounts recorded, such differences will impact our tax provision in our consolidated statements of income in the period in which such determination is made.

We must also assess the likelihood that deferred tax assets will be realized from future taxable income and, based on this assessment establish a valuation allowance, if required. The determination of our valuation allowance involves assumptions, judgments, and estimates, including forecasted earnings, future taxable income, and the relative proportions of revenue and income before taxes in the various domestic and international jurisdictions in which we operate. To the extent we establish a valuation allowance or change the valuation allowance in a period, we reflect the change with a corresponding increase or decrease of our income tax provision in our consolidated statements of income.

Stock-based compensation

Compensation expense related to stock-based compensation, including employee and non-employee director awards, is measured and recognized in the financial statements based on fair value. The assumptions we use in the valuation model are based on future expectations regarding our business, combined with management judgment. Under the fair value recognition provisions of this guidance, stock-based compensation is measured at the grant date based on the fair value of the award and is recognized as expense, net of estimated forfeitures, over the requisite service period, which is generally the vesting period of the award.

Determining the fair value of stock-based awards at the grant date represents our board of directors’ best estimates; however, the estimates involve inherent uncertainties and the application of judgment. We use the Black-Scholes option pricing model to determine the fair value of stock options. The determination of the grant date fair value of options using an option pricing model is affected by our estimated common stock fair value as well as assumptions regarding a number of other complex and subjective variables. These variables include the fair value of our common stock, our expected stock price volatility over the expected term of the options, stock option exercise and cancellation behaviors, risk-free interest rates and expected dividends.

Prior to our IPO in August of 2013, our board of directors considered numerous objective and subjective factors to determine the fair market value of our common stock at each meeting at which stock options were granted and approved.

Stock-based compensation expenses are classified in the statements of income based on the department to which the related employee reports. Our stock-based awards are comprised principally of stock options and restricted stock unit awards.

 

41


Table of Contents

Recent accounting pronouncements

Comprehensive income: Reclassifications

In February 2013, the FASB issued ASU No. 2013-02, “Reporting of Amounts Reclassified Out of Accumulated Other Comprehensive Income,” or ASU 2013-02, to supersede and replace the presentation requirements for reclassifications out of accumulated other comprehensive income in ASU 2011-05, which were deferred indefinitely under ASU No. 2011-12, “Deferral of the Effective Date for Amendments to the Presentation of Reclassifications of Items Out of Accumulated Other Comprehensive Income in Accounting Standards Update No. 2011-05,” or ASU 2011-12, issued in December 2011. The amendments in ASU 2013-02 would require an entity to provide additional information about reclassifications out of accumulated other comprehensive income by the respective line items of net income. For public entities, the amendments are effective for fiscal years, and interim periods within those years, beginning after December 15, 2012. The adoption of ASU 2013-02 did not have an impact on our financial position or results of operations.

Release of cumulative translation adjustment

In March 2013, the FASB issued ASU No. 2013-05, “Parent’s Accounting for the Cumulative Translation Adjustment upon Derecognition of Certain Subsidiaries or Groups of Assets within a Foreign Entity or of an Investment in a Foreign Entity,” or ASU 2013-05, which resolves diversity in practice regarding the release of the cumulative translation adjustment into net income when a parent either sells a part or all of its investment in a foreign entity or no longer holds a controlling financial interest in a subsidiary or group of assets within a foreign entity. The amendments in ASU 2013-05 are effective prospectively for fiscal years, and interim periods within those years, beginning after December 15, 2013. Early adoption is permitted. The adoption of ASU 2013-05 did not have a material impact on our financial position or results of operations.

 

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Interest Rate Sensitivity

We are exposed to market risk in the normal course of our business operations due to our ongoing investing and financing activities. The risk of loss can be assessed from the perspective of adverse changes in fair values, cash flows and future earnings. We have established policies and procedures governing our management of market risks and the use of financial instruments to manage exposure to such risks. We generally do not hedge our interest rate exposure. We had $8.0 million of debt, bearing interest at a variable rate, outstanding under our credit facilities as of December 31, 2013. Based on the $8.0 million of variable interest rate indebtedness that was outstanding as of December 31, 2013, a hypothetical 100 basis point increase or decrease in the interest rate on our interest rate variable debt would have resulted in an approximately $0.1 million change to our interest expense for fiscal 2013.

Exchange Rate Sensitivity

As of December 31, 2013, we were not exposed to significant foreign currency exchange rate risks that could have a material effect on our financial condition or results of operations. Foreign currency fluctuations could in the future have an adverse effect on our business and results of operations. We primarily sell our products inside and outside of the United States in U.S. Dollars. As the majority of our expenses are also in U.S. Dollars, we are somewhat insulated from currency fluctuations. We do not currently hedge our foreign currency exposure.

Credit and Other Risks

We are exposed to credit risk associated with cash equivalents, investments, and trade receivables. We do not believe that our cash equivalents or investments present significant credit risks because the counterparties to the instruments consist of major financial institutions and we manage the notional amount of contracts entered into with any one counterparty. Our cash and cash equivalents as of December 31, 2013 consisted principally of FDIC insured certificates of deposit and cash balances in non-interest bearing checking accounts. Substantially all trade receivable balances of our businesses are unsecured. The concentration of credit risk with respect to trade receivables is concentrated by the number of significant customers that we have in our customer base and a prolonged economic downturn could increase our exposure to credit risk on our trade receivables. We perform ongoing credit evaluations of our customers and maintain an allowance for potential credit losses.

We do not currently hedge our exposure to increases in the prices for our primary raw materials.

 

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Our financial statements and the report of our independent registered public accounting firm are included in this Annual Report beginning on page F-1. The index to these reports and our financial statements is included in Part IV, Item 15 below.

 

42


Table of Contents
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

 

ITEM 9A. CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures

We maintain “disclosure controls and procedures,” as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act, that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the company’s management, including its principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure.

Our management, with the participation of our Chief Executive Officer and our Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures as of December 31, 2013. Based on the evaluation of our disclosure controls and procedures as of December 31, 2013, our Chief Executive Officer and Chief Financial Officer concluded that, as of such date, our disclosure controls and procedures were effective at the reasonable assurance level.

Management’s Report on Internal Control Over Financial Reporting

This Annual Report does not include a report of management’s assessment regarding internal control over financial reporting or an attestation report of our independent registered public accounting firm due to a transition period established by the rules of the SEC for newly public companies.

Changes in Internal Control over Financial Reporting

There were no changes in our internal control over financial reporting identified in connection with the evaluation required by Rule 13a-15(d) and 15d-15(d) under the Exchange Act that occurred during the three months ended December 31, 2013 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Inherent Limitations on Effectiveness of Controls

Our management, including our Chief Executive Officer and Chief Financial Officer, believes that our disclosure controls and procedures and internal control over financial reporting are designed to provide reasonable assurance of achieving their objectives and are effective at the reasonable assurance level. However, our management does not expect that our disclosure controls and procedures or our internal control over financial reporting will prevent all errors and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, have been detected. These inherent limitations include the realities that judgments in decision making can be faulty, and that breakdowns can occur because of a simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people or by management override of the controls. The design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions; over time, controls may become inadequate because of changes in conditions, or the degree of compliance with policies or procedures may deteriorate. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.

 

ITEM 9B. OTHER INFORMATION.

None.

 

43


Table of Contents

PART III

 

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

Information required by this Item regarding our directors and executive officers is incorporated by reference to the sections of our proxy statement to be filed with the SEC in connection with our 2014 annual meeting of stockholders (the “Proxy Statement”) entitled “Election of Class I Directors” and “Corporate Governance.”

Information required by this Item regarding our corporate governance, including our audit committee and code of business conduct and ethics, is incorporated by reference to the sections of the Proxy Statement entitled “Corporate Governance” and “Board of Directors.”

Information required by this Item regarding compliance with Section 16(a) of the Exchange Act required by this Item is incorporated by reference to the section of the Proxy Statement entitled “Section 16(a) Beneficial Ownership Reporting Compliance.”

 

ITEM 11. EXECUTIVE COMPENSATION

Information required by this item regarding executive compensation is incorporated by reference to the information set forth under the captions “Executive Compensation,” “Director Compensation” and “Corporate Governance” in our Proxy Statement.

 

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

Information regarding security ownership of certain beneficial owners and management is incorporated by reference to the section of the Proxy Statement entitled “Security Ownership of Certain Beneficial Owners and Management.”

Information required by this item regarding securities authorized for issuance under our equity compensation plans is incorporated by reference to the information set forth under the caption “Executive Compensation” in our Proxy Statement.

 

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, DIRECTOR INDEPENDENCE

Information required by this Item is incorporated by reference to the sections of the Proxy Statement entitled “Certain Relationships and Related Party Transactions and Director Independence.”

 

ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES

Information required by this Item is incorporated by reference to the section of the Proxy Statement entitled “Ratification of Appointment of Independent Registered Public Accounting Firm.”

PART IV

 

ITEM 15. EXHIBITS, FINANCIAL STATEMENT SCHEDULES

 

(a) (1) Financial Statements       

Report of Independent Registered Public Accounting Firm

     F-1   

Consolidated Balance Sheets at December 31, 2013 and 2012

     F-2   

Consolidated Statements of Income for the fiscal years ended December 31, 2013, 2012 and 2011

     F-3   

Consolidated Statements of Comprehensive Income for the fiscal years ended December 31, 2013, 2012 and 2011

     F-4   

Consolidated Statements of Stockholders’ Equity for the fiscal years ended December 31, 2013, 2012 and 2011

     F-5   

Consolidated Statements of Cash Flows for the fiscal years ended December 31, 2013, 2012 and 2011

     F-6   

Notes to Consolidated Financial Statements

     F-7   
     (2) Exhibits   

See “Index to Exhibits” set forth on page 46

     46   

 

44


Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

    Fox Factory Holding Corp.

 

    /s/ Zvi Glasman
    Zvi Glasman
    Chief Financial Officer
    (Principal Financial Officer and Duly Authorized Signatory)
   

Date: March 03, 2014

   

POWER OF ATTORNEY

KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Zvi Glasman and Larry L. Enterline, and each of them, as his or her true and lawful attorneys-in-fact and agents, with full power of substitution for him or her, and in his or her name in any and all capacities, to sign any and all amendments to this Annual Report on Form 10-K, and to file the same, with exhibits thereto and other documents in connection therewith, with the U.S. Securities and Exchange Commission, granting unto said attorneys-in-fact and agents, and each of them, full power and authority to do and perform each and every act and thing requisite and necessary to be done therewith, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, and either of them, his or her substitute or substitutes, may lawfully do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

 

Signature    Title   Date

/s/ Larry L. Enterline

Larry L. Enterline

  

Chief Executive Officer and Director

(Principal Executive Officer)

  March 03, 2014

/s/ Zvi Glasman

Zvi Glasman

  

Chief Financial Officer

(Principal Financial and Accounting Officer)

  March 03, 2014

/s/ Elias Sabo

Elias Sabo

   Chairman   March 03, 2014

/s/ Robert C. Fox, Jr.

Robert C. Fox, Jr.

   Director   March 03, 2014

/s/ Joseph Hagin

Joseph Hagin

   Director   March 03, 2014

/s/ Dudley Mendenhall

Dudley Mendenhall

   Director   March 03, 2014

/s/ Carl Nichols

Carl Nichols

   Director   March 03, 2014

/s/ Ted Waitman

Ted Waitman

   Director   March 03, 2014

 

45


Table of Contents

INDEX TO EXHIBITS

 

  3.1

   Amended and Restated Certificate of Incorporation (previously filed on September 19, 2013 as Exhibit 3.1 to the Company’s Quarterly Report on Form 10-Q (File No. 001-36040) and incorporated herein by reference).

  3.2

   Amended and Restated Bylaws (previously filed on September 19, 2013 as Exhibit 3.2 to the Company’s Quarterly Report on Form 10-Q (File No. 001-36040) and incorporated herein by reference).

  4.1

   Form of Common Stock Certificate (previously filed on July 8, 2013 as Exhibit 4.1 to the Company’s Registration Statement on Form S-1(File No. 333-189841) and incorporated herein by reference).

  4.2

   Amended and Restated Registration Rights Agreement, dated May 12, 2013, by and among Fox Factory Holding Corp., Compass Group Diversified Holdings LLC, Madison Capital Funding Co-Investment Fund LP and certain other stockholders listed on the signature page thereto (previously filed on July 8, 2013 as Exhibit 4.2 to the Company’s Registration Statement on Form S-1(File No. 333-189841) and incorporated herein by reference).

10.1

   Revolving Credit Facility dated August 7, 2013 by and among Fox Factory Holding Corp., Fox Factory, Inc., SunTrust Bank and the other parties thereto (previously filed on September 19, 2013 as Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q (File No. 001-36040) and incorporated herein by reference).

10.2†

   Employment Agreement, dated July 22, 2013, by and between Fox Factory Holding Corp. and Larry L. Enterline (previously filed on July 25, 2013 as Exhibit 10.7 to the Company’s Registration Statement on Form S-1 (File No. 333-189841) and incorporated herein by reference).

10.3†

   Employment Agreement, dated July 22, 2013, by and between Fox Factory Holding Corp. and Zvi Glasman (previously filed on July 25, 2013 as Exhibit 10.8 to the Company’s Registration Statement on Form S-1 (File No. 333-189841) and incorporated herein by reference).

10.4†

   Employment Agreement, dated July 22, 2013, by and between Fox Factory Holding Corp. and John Boulton (previously filed on July 25, 2013 as Exhibit 10.9 to the Company’s Registration Statement on Form S-1 (File No. 333-189841) and incorporated herein by reference).

10.5†

   Employment Agreement, dated July 22, 2013, by and between Fox Factory Holding Corp. and Mario Galasso (previously filed on July 25, 2013 as Exhibit 10.10 to the Company’s Registration Statement on Form S-1 (File No. 333-189841) and incorporated herein by reference).

10.6†

   Non-Employee Director Compensation Policy (previously filed on July 25, 2013 as Exhibit 10.24 to the Company’s Registration Statement on Form S-1 (File No. 333-189841) and incorporated herein by reference).

10.7 

   Information Sharing and Cooperation Agreement dated August 13, 2013 by and between Compass Diversified Holdings, on its behalf and on behalf of its wholly-owned subsidiary, Compass Group Diversified Holdings LLC, and Fox Factory Holding Corp., on its behalf and on behalf of its wholly-owned subsidiary, Fox Factory, Inc. (previously filed on November 6, 2013 as Exhibit 10.6 to the Company’s Quarterly Report on Form 10-Q (File No. 001-36040) and incorporated herein by reference).

10.8†

   Form of Indemnification Agreement between Fox Factory Holding Corp. and certain of its directors and officers (previously filed on July 8, 2013 as Exhibit 10.1 to the Company’s Registration Statement on Form S-1 (File No. 333-189841) and incorporated herein by reference).

10.9†

   Form of Indemnification Agreement between Fox Factory Holding Corp. and Elias Sabo and certain advisors (previously filed on July 8, 2013 as Exhibit 10.2 to the Company’s Registration Statement on Form S-1 (File No. 333-189841) and incorporated herein by reference).

10.10†

   2008 Stock Option Plan, as amended (previously filed on July 8, 2013 as Exhibit 10.3 to the Company’s Registration Statement on Form S-1 (File No. 333-189841) and incorporated herein by reference).

10.11†

   2008 Non-Statutory Stock Option Plan, as amended (previously filed on July 29, 2013 as Exhibit 10.4 to the Company’s Registration Statement on Form S-1 (File No. 333-189841) and incorporated herein by reference

10.12†

   2013 Omnibus Plan (previously filed on July 29, 2013 as Exhibit 10.5 to the Company’s Registration Statement on Form S-1 (File No. 333-189841) and incorporated herein by reference).

 

46


Table of Contents

  10.13†

   Form of Restricted Stock Unit Award Agreement under 2013 Omnibus Plan (previously filed on July 25, 2013 as Exhibit 10.6 to the Company’s Registration Statement on Form S-1 (File No. 333-189841) and incorporated herein by reference).

  10.14

   Air Commercial Real Estate Association Standard Industrial / Commercial Single-Tenant Lease – Gross, dated October 31, 2011, by and between Fox Factory, Inc. and Sammie Rae Abitbol, LLC (previously filed on July 8, 2013 as Exhibit 10.11 to the Company’s Registration Statement on Form S-1(File No. 333-189841) and incorporated herein by reference).

  10.15

   Air Commercial Real Estate Association Standard Industrial / Commercial Single-Tenant-Gross, March 24, 2010, by and between Fox Factory, Inc. and Scarborough Gilbert Partners, and related addenda (previously filed on July 8, 2013 as Exhibit 10.12 to the Company’s Registration Statement on Form S-1(File No. 333-189841) and incorporated herein by reference).

  10.16

   Lease Agreement, dated July 1, 2003, by and between Fox Factory, Inc. and Robert C. Fox, Jr. (previously filed on July 8, 2013 as Exhibit 10.13 to the Company’s Registration Statement on Form S-1(File No. 333-189841) and incorporated herein by reference).

  10.17

   Lease Agreement, dated June 13, 2006, by and between Fox Factory, Inc. and Freedom Associates, LLC, and related addenda (previously filed on July 8, 2013 as Exhibit 10.14 to the Company’s Registration Statement on Form S-1(File No. 333-189841) and incorporated herein by reference).

  10.18

   Air Commercial Real Estate Association Standard Industrial/Commercial Multi-Tenant Lease - Net, dated April 19, 2012, by and between Fox Factory, Inc. and North Johnson Vernon Property, LLC, and related addendum (previously filed on July 8, 2013 as Exhibit 10.15 to the Company’s Registration Statement on Form S-1(File No. 333-189841) and incorporated herein by reference).

  10.19

   Land and Factory Lease Agreement, dated April 2, 2012, by and among Fox Factory, Inc., Hong-Ming Lee, Zhi-Ming Lee, Qing-Yu Lee, Fu-Zhong Lu, Yu-Wei Lu and Guan-Lun Lu (previously filed on July 8, 2013 as Exhibit 10.16 to the Company’s Registration Statement on Form S-1(File No. 333-189841) and incorporated herein by reference).

  10.20

   Sublease, dated January 1, 2012, by and between Fox Factory, Inc. and Robert C. Fox, Jr., and related addendum (previously filed on July 8, 2013 as Exhibit 10.17 to the Company’s Registration Statement on Form S-1(File No. 333-189841) and incorporated herein by reference).

  10.21

   Services and Secondment Agreement, as amended, dated March 10, 2011, by and among Fox Factory, Inc., Fox Factory Holding Corp. and Vulcan Holdings, Inc. (previously filed on July 8, 2013 as Exhibit 10.18 to the Company’s Registration Statement on Form S-1(File No. 333-189841) and incorporated herein by reference).

  10.22

   Asset Purchase Agreement, by and between ST USA Holding Corp. and Sport Truck USA, Inc., dated March 5, 2014 (previously filed on March 6, 2014 as Exhibit 10.1 to the Company’s Current Report on Form 8-K (File No. 001-36040) and incorporated herein by reference.

  21.1*

   List of Subsidiaries

  23.1*

   Consent of Independent Registered Public Accounting Firm

  24.1*

   Power of Attorney (contained in signature page to this Annual Report on Form 10-K)

  31.1*

   Certification of Principal Executive Officer pursuant to Rule 13a-14(a) and 15d-14(a) of the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

  31.2*

   Certification of Principal Financial Officer pursuant to Rule 13a-14(a) and 15d-14(a) of the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

  32.1*

   Certification of Principal Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

  32.2*

   Certification of Principal Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted to Section 906 of the Sarbanes-Oxley Act of 2002.

101.INS**

   XBRL Instance Document.

101.SCH**

   XBRL Taxonomy Extension Schema.

101.CAL**

   XBRL Taxonomy Extension Calculation Linkbase.

 

47


Table of Contents

101.DEF**

   XBRL Taxonomy Extension Definition Linkbase.

101.LAB**

   XBRL Taxonomy Extension Label Linkbase.

101.PRE**

   XBRL Taxonomy Extension Presentation Linkbase.

 

Denotes management contracts and compensatory plans or arrangements
* Filed herewith
** In accordance with Rule 406T of Regulation S-T, the information in these exhibits is furnished and deemed not filed or part of a registration statement or prospectus for purposes of sections 11 or 12 of the Securities Act of 1933, as amended, is deemed not filed for purposes of section 18 of the Securities Exchange Act of 1934, as amended, and otherwise is not subject to liability under these sections.

 

48


Table of Contents

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Stockholders of

Fox Factory Holding Corp.

Scotts Valley, California

We have audited the accompanying consolidated balance sheets of Fox Factory Holding Corp. and subsidiaries (the “Company”) as of December 31, 2013 and 2012 and the related consolidated statements of income, comprehensive income, stockholders’ equity and cash flows for each of the three years in the period ended December 31, 2013. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of Fox Factory Holding Corp. and subsidiaries as of December 31, 2013 and 2012, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2013, in conformity with accounting principles generally accepted in the United States of America.

/s/ GRANT THORNTON LLP

San Jose, California

March 11, 2014

 

F-1


Table of Contents

Fox Factory Holding Corp.

Consolidated Balance Sheets

(In thousands, except share and per share data)

 

     As of December 31,  
     2013     2012  

Assets

    

Current assets:

    

Cash and cash equivalents

   $ 1,683      $ 15   

Accounts receivable (net of allowance for doubtful accounts of $366 and $440 at December 31, 2013 and 2012, respectively)

     33,781        25,224   

Inventory

     42,783        34,255   

Prepaids and other current assets

     2,648        2,242   

Deferred tax assets

     3,490        3,405   
  

 

 

   

 

 

 

Total current assets

     84,385        65,141   

Property and equipment, net

     13,418        11,789   

Loan fees, net

     717        —    

Loan fees, net—related party

     —         1,665   

Goodwill

     31,925        31,372   

Intangibles, net

     27,284        32,153   
  

 

 

   

 

 

 

Total assets

   $ 157,729      $ 142,120   
  

 

 

   

 

 

 

Liabilities and stockholders’ equity

    

Current liabilities:

    

Accounts payable

   $ 24,254      $ 19,551   

Accrued expenses

     12,451        10,156   

Liability reserve for uncertain tax positions

     7,796        7,292   

Current portion of long-term debt—related party

     —         3,000   
  

 

 

   

 

 

 

Total current liabilities

     44,501        39,999   

Line of credit

     8,000        —    

Line of credit—related party

     —         750   

Long-term debt, less current portion—related party

     —         55,500   

Deferred rent

     931        1,132   

Deferred tax liabilities

     12,005        15,155   
  

 

 

   

 

 

 

Total liabilities

     65,437        112,536   
  

 

 

   

 

 

 

Commitments and contingencies (Note 9)

    

Stockholders’ equity

    

Preferred stock, $0.001 par value—10,000,000 authorized and no shares issued or outstanding as of December 31, 2013 and 2012

     —          —     

Common stock, $0.001 par value—90,000,000 authorized as of December 31, 2013 and 2012; 36,317,087 and 33,459,944 shares issued and outstanding as of December 31, 2013 and 2012, respectively

     36        33   

Additional paid-in capital

     87,788        49,169   

Accumulated other comprehensive income (loss)

     (15     1   

Retained earnings (deficit)

     4,483        (19,619
  

 

 

   

 

 

 

Total stockholders’ equity

     92,292        29,584   
  

 

 

   

 

 

 

Total liabilities and stockholders’ equity

   $ 157,729      $ 142,120   
  

 

 

   

 

 

 

The accompanying notes are an integral part of these consolidated statements.

 

F-2


Table of Contents

Fox Factory Holding Corp.

Consolidated Statements of Income

(In thousands, except per share data)

 

     For the years ended December 31,  
     2013     2012     2011  

Sales

   $ 272,746      $ 235,869      $ 197,739   

Cost of sales

     192,617        173,040        140,849   
  

 

 

   

 

 

   

 

 

 

Gross profit

     80,129        62,829        56,890   
  

 

 

   

 

 

   

 

 

 

Operating expenses:

      

Sales and marketing

     14,153        12,570        11,748   

Research and development

     10,409        9,727        9,750   

General and administrative

     11,408        9,063        7,588   

Amortization of purchased intangibles

     5,378        5,315        5,217   
  

 

 

   

 

 

   

 

 

 

Total operating expenses

     41,348        36,675        34,303   
  

 

 

   

 

 

   

 

 

 

Income from operations

     38,781        26,154        22,587   
  

 

 

   

 

 

   

 

 

 

Other expense, net:

      

Interest expense

     (4,125     (3,486     (1,982

Other income (expense), net

     12        (277     (13
  

 

 

   

 

 

   

 

 

 

Other expense, net

     (4,113     (3,763     (1,995
  

 

 

   

 

 

   

 

 

 

Income before income taxes

     34,668        22,391        20,592   

Provision for income taxes

     10,566        8,181        7,054   
  

 

 

   

 

 

   

 

 

 

Net income

   $ 24,102      $ 14,210      $ 13,538   
  

 

 

   

 

 

   

 

 

 

Earnings per share:

      

Basic

   $ 0.70      $ 0.44      $ 0.45   
  

 

 

   

 

 

   

 

 

 

Diluted

   $ 0.68      $ 0.44      $ 0.42   
  

 

 

   

 

 

   

 

 

 

Weighted average shares used to compute earnings per share:

      

Basic

     34,571        32,059        30,030   

Diluted

     35,705        32,515        32,295   

The accompanying notes are an integral part of these consolidated statements.

 

F-3


Table of Contents

Fox Factory Holding Corp.

Consolidated Statements of Comprehensive Income

(In thousands)

 

     For the years ended December 31,  
     2013     2012      2011  

Comprehensive income

       

Net income

   $ 24,102      $ 14,210       $ 13,538   
  

 

 

   

 

 

    

 

 

 

        Other comprehensive income (loss):

       

Foreign currency translation adjustments, net of tax

     (16     1         —     
  

 

 

   

 

 

    

 

 

 

Other comprehensive income (loss), net of tax

     (16     1         —     
  

 

 

   

 

 

    

 

 

 

Total comprehensive income

   $ 24,086      $ 14,211       $ 13,538   
  

 

 

   

 

 

    

 

 

 

The accompanying notes are an integral part of these consolidated statements.

 

F-4


Table of Contents

Fox Factory Holding Corp.

Consolidated statements of stockholders’ equity

for the years ended December 31, 2011, 2012, and 2013

(In thousands, except share data)

 

     Common stock      Additional
paid-in
capital
    Accumulated
other
comprehensive
income (loss)
    Retained
earnings
(deficit)
    Total
stockholders’
equity
 
     Shares     Amount           

Balance—December 31, 2010

     30,029,925      $ 30       $ 33,064      $ —        $ 19,633      $ 52,727   

Stock-based compensation expense

     —          —           1,030        —          —          1,030   

Net income

     —          —           —          —          13,538        13,538   
  

 

 

   

 

 

    

 

 

   

 

 

   

 

 

   

 

 

 

Balance—December 31, 2011

     30,029,925      $ 30       $ 34,094      $ —        $ 33,171      $ 67,295   

Repurchase of common stock

     (4,645     —           (29     —          —          (29

Issuance of common stock upon exercises of employee stock options

     2,423,626        —           —          —          —          —     

Excess tax benefit from exercise of stock options

     —          —           5,755        —          —          5,755   

Proceeds from equity issuance, net

     1,011,038        3         7,201        —          —          7,204   

Dividend distribution ($2.00 per share)

     —          —           —          —          (67,000 )     (67,000 )

Stock-based compensation expense

     —          —           2,148        —          —          2,148   

Foreign currency translation adjustment

     —          —           —          1        —          1   

Net income

     —          —           —          —          14,210        14,210   
  

 

 

   

 

 

    

 

 

   

 

 

   

 

 

   

 

 

 

Balance—December 31, 2012

     33,459,944      $ 33       $ 49,169      $ 1      $ (19,619   $ 29,584   

Stock-based compensation expense

     —          —           2,500        —          —          2,500   

Foreign currency translation adjustment

     —          —           —          (16     —          (16 )

Issuance of common stock in connection with initial public offering, net of offering costs

     2,857,143        3         36,119        —          —          36,122   

Net income

     —          —           —          —          24,102        24,102   
  

 

 

   

 

 

    

 

 

   

 

 

   

 

 

   

 

 

 

Balance—December 31, 2013

     36,317,087      $ 36       $ 87,788      $ (15 )   $ 4,483      $ 92,292   
  

 

 

   

 

 

    

 

 

   

 

 

   

 

 

   

 

 

 

The accompanying notes are an integral part of these consolidated statements.

 

F-5


Table of Contents

Fox Factory Holding Corp.

Consolidated Statements of Cash Flows

(In thousands)

 

     For the years ended December 31,  
     2013     2012     2011  

OPERATING ACTIVITIES:

      

Net income

   $ 24,102      $ 14,210      $ 13,538   

Adjustments to reconcile net income to net cash provided by operating activities:

      

Depreciation and amortization

     7,759        7,204        6,598   

Provision (benefit) for doubtful accounts

     (74     68        46   

Stock-based compensation

     2,500        2,148        1,030   

Excess tax benefit from exercise of stock options

     —          (5,755     —     

(Gain) loss on disposal of property and equipment

     (7     253        63   

Write-off of unamortized loan origination costs from related party debt

     1,405        —          —     

Deferred taxes

     (3,236     (3,184     (2,430

Amortization of loan fees

     323        387        207   

City of Watsonville loan credit

     —          (4     (32

Changes in operating assets and liabilities:

      

Accounts receivable

     (8,510     (7,029     (1,153

Inventory

     (7,447     (4,723     (1,476

Income taxes receivable

     505        7,846        2,744   

Prepaids and other current assets

     (405     (474     (762

Accounts payable

     3,614        2,981        636   

Accrued expenses

     2,291        2,758        2,060   

Deferred rent

     (201     681        (31
  

 

 

   

 

 

   

 

 

 

Net cash provided by operating activities

     22,619        17,367        21,038   
  

 

 

   

 

 

   

 

 

 

INVESTING ACTIVITIES:

      

Purchases of property and equipment

     (3,932     (4,928     (3,067

Proceeds from sale of property and equipment

     7        2        11   

Acquisition of business

     (1,117     —          —     

Purchase of intangible assets

     —          (835     —     
  

 

 

   

 

 

   

 

 

 

Net cash used in investing activities

     (5,042     (5,761     (3,056
  

 

 

   

 

 

   

 

 

 

FINANCING ACTIVITIES:

      

Repurchase of common stock

     —          (29     —     

Payments for deferred offering costs of initial public offering

     (3,735     —          —     

Proceeds from initial public offering, net of underwriter fees

     39,857        —          —     

Proceeds from equity issuance

     —          7,204        —     

Excess tax benefit from exercise of stock options

     —          5,755        —     

Dividends paid

     —          (67,000     —     

Proceeds from line of credit, net of origination fees of $779

     27,721        —          —     

Payments on line of credit

     (20,500     —          —     

Proceeds from related party line of credit

     31,858        32,385        20,798   

Payments on related party line of credit

     (32,608     (33,085     (28,480

Proceeds from issuance of related party debt

     —          58,404        —     

Repayment of related party debt

     (58,500     (15,339     (10,688
  

 

 

   

 

 

   

 

 

 

Net cash used in financing activities

     (15,907     (11,705     (18,370
  

 

 

   

 

 

   

 

 

 

EFFECT OF EXCHANGE RATE CHANGES ON CASH AND CASH EQUIVALENTS

     (2       —     

CHANGE IN CASH AND CASH EQUIVALENTS

     1,668        (99     (388

CASH AND CASH EQUIVALENTS—Beginning of period

     15        114        502   
  

 

 

   

 

 

   

 

 

 

CASH AND CASH EQUIVALENTS—End of period

   $ 1,683      $ 15      $ 114   
  

 

 

   

 

 

   

 

 

 

SUPPLEMENTAL CASH FLOW INFORMATION

      

Cash paid during the period for:

      

Income taxes

   $ 10,778      $ 3,510      $ 6,738   

Interest

   $ 2,565      $ 2,787      $ 1,809   

Non-cash investing and financing activities:

      

Unpaid portion of cash consideration for acquisition

   $ 1,401      $ —        $ —     

The accompanying notes are an integral part of these consolidated statements.

 

F-6


Table of Contents

Fox Factory Holding Corp.

Notes to Consolidated Financial Statements

Years ended December 31, 2013, 2012 and 2011

1. Nature of Business and Summary of Significant Accounting Policies

Fox Factory Holding Corp. (the “Company”) is a designer, manufacturer and marketer of high end suspension products for mountain bikes and powered vehicles, which includes all-terrain vehicles, snowmobiles and other off-road vehicles. The Company acts both as a tier one supplier to leading action sports original equipment manufacturers (“OEM”) and provides aftermarket products to retailers and distributors (“AM”).

On August 13, 2013, the Company completed the initial public offering (“IPO”) of its common stock pursuant to a registration statement on Form S-1. In the IPO, the Company sold 2,857,143 shares of common stock and the selling stockholders sold a total of 7,000,000 shares of common stock (including the shares sold pursuant to the exercise of the option granted to the underwriters) at an initial public offering price to the public of $15.00 per share. The Company received net proceeds from the IPO of approximately $36.1 million from its sale of 2,857,143 shares of common stock after deducting underwriting discounts and commissions and offering expenses. The Company did not receive any proceeds from the sale of shares by the selling stockholders. The Company used the net proceeds it received to pay down related party debt. (see Note 8 – Debt).

The Company is subject to those risks common in manufacture-driven markets, including, but not limited to, competitive forces, dependence on key personnel, customer demand for its products, the successful protection of its proprietary technologies, compliance with government regulations, and the possibility of not being able to obtain additional financing when needed.

Basis of Presentation—The accompanying consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (GAAP).

In July 2013, the Company’s board of directors approved a 46.45 for 1 stock split of the Company’s issued and outstanding common stock which became effective on July 25, 2013. Accordingly, all share and per share amounts for all periods presented in these consolidated financial statements and notes have been adjusted retroactively to reflect this stock split.

Principles of Consolidation—The consolidated financial statements include the Company and its wholly owned subsidiaries. All intercompany transactions and balances have been eliminated in consolidation.

Use of Estimates—The preparation of consolidated financial statements in accordance with GAAP requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, and disclosures of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of sales and expenses during the reporting period. Such estimates include the useful lives of fixed assets and intangible assets, allowances for doubtful accounts, warranty reserve, stock-based compensation, income taxes and inventory write-downs. Actual results could differ from those estimates.

Foreign Currency Translation—The functional currency of the Company’s non-U.S. entities is the local currency of the respective operations. The Company translates the financial statements of its non-U.S. entities into U.S. dollars each reporting period for purposes of consolidation.

Assets and liabilities of the Company’s foreign subsidiaries are translated at the period-end currency exchange rates while sales, expenses, gains, and losses are translated at the average currency exchange rates in effect for the period, the effects of these translation adjustments are reported in the statements of comprehensive income.

Cash and Cash Equivalents—Cash consists of cash maintained in a checking account. All highly liquid investments purchased with an original maturity date of 90 days or less at the date of purchase are considered to be cash equivalents.

Accounts Receivable—Accounts receivable are unsecured customer obligations which generally require payment within various terms from the invoice date. The receivables are stated at the invoice amount. Financing terms vary by customer. Payments of accounts receivable are applied to the specific invoices identified on the customer’s remittance advice or if unspecified, generally to the earliest unpaid invoices.

The carrying amount of accounts receivable is reduced by a valuation allowance that reflects management’s best estimate of amounts that may not be collected. All accounts or portions thereof deemed to be uncollectible or that may require an excessive collection cost are written off to the allowance for doubtful accounts.

Concentration of Credit Risk—Financial instruments, which potentially subject the Company to significant concentrations of credit risk, consist primarily of cash and accounts receivable. A significant portion of the Company’s cash is held at one large financial institution. The Company has not experienced any losses in such accounts.

 

F-7


Table of Contents

The Company mitigates its credit risk with respect to accounts receivable by performing ongoing credit evaluations and monitoring of its customers’ accounts receivable balances. The following customers accounted for 10% or more of the Company’s accounts receivable balance:

 

     As of December 31,  
     2013     2012  

Customer A

     16     13

Customer B

     11     11

Customer C

           12

 

* Represents less than 10%

During the years ended December 31, 2013, 2012, and 2011, Customer A from table above represented 17%, 13% and 12%, of sales, respectively.

The Company depends on a limited number of vendors to supply component parts for its products. The Company purchased 48%, 43%, and 58% of its product components for the years ended December, 31, 2013, 2012, and 2011, respectively, from ten vendors. As of December 31, 2013 and 2012, amounts due to these vendors represented 53% and 43% of accounts payable, respectively.

Allowance for Doubtful Accounts—The Company records a provision for doubtful accounts based on historical experience and a detailed assessment of the collectability of its accounts receivable. In estimating the allowance for doubtful accounts, management considers, among other factors, the aging of the accounts receivable, historical write-offs, and the credit-worthiness of each customer. If circumstances change, such as higher-than-expected defaults or an unexpected material adverse change in a major customer’s ability to meet its financial obligations, the Company’s estimate of the recoverability of the amounts due could be reduced by a material amount.

The following table presents the activity in the allowance for doubtful accounts (in thousands):

 

     For the years ended
December 31,
 
     2013     2012     2011  

Allowance for doubtful accounts:

      

Balance, beginning of period

   $ 440      $ 372      $ 326   

Add: bad debt expense (benefit)

     (45 )     87        104   

Less: write-offs, net of recoveries

     (29     (19     (58
  

 

 

   

 

 

   

 

 

 

Balance, end of period

   $ 366      $ 440      $ 372   
  

 

 

   

 

 

   

 

 

 

Inventories—Inventories are stated at the lower of standard cost (which generally approximates actual costs on a first-in first-out basis) or market. Cost includes raw materials, direct labor, and manufacturing overhead. Market value is based on current replacement cost for raw materials and on a net realizable value for finished goods. Adjustments to reduce the cost of inventory to its net realizable value are made, if required, for estimated excess, obsolescence or impaired balances.

Property and Equipment—Property and equipment are stated at cost less accumulated depreciation. Depreciation is computed using the straight-line method over the estimated useful lives of the related assets. Maintenance and repairs are charged to expense as incurred, and improvements and betterments are capitalized. When assets are retired or otherwise disposed of, the cost and accumulated depreciation and amortization are removed from the balance sheet and any resulting gain or loss is reflected in operations in the period realized.

Leasehold improvements are amortized on a straight-line basis over the terms of the lease, or the useful lives of the assets, whichever is shorter. Depreciation and amortization periods for the Company’s property and equipment are as follows:

 

Asset Classification

   Estimated
useful life
 

Machine shop equipment

     15 years   

Manufacturing equipment

     5-7 years   

Office equipment and furniture

     5-7 years   

Transportation equipment

     5 years   

 

F-8


Table of Contents

Impairment of Long-lived Assets—The Company periodically reviews property and equipment for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset is impaired or the estimated useful lives are no longer appropriate. If indicators of impairment exist and the undiscounted projected cash flows associated with such assets are less than the carrying amount of the asset, an impairment loss is recorded to write the asset down to their estimated fair values. Fair value is estimated based on discounted future cash flows. No impairment charges were recorded during the years ended December 31, 2013, 2012 and 2011.

Business Combinations—The Company accounts for acquisitions of entities that include inputs and processes and have the ability to create outputs as business combinations. The Company allocates the purchase price of the acquisition to the tangible assets acquired, liabilities assumed and identifiable intangible assets acquired based on their estimated fair values. The excess of the purchase price over those fair values is recorded as goodwill. Acquisition-related expenses and restructuring costs are expensed as incurred. During the measurement period, the Company records adjustments to provisional amounts recorded for assets acquired and liabilities assumed with the corresponding offset to goodwill. After the measurement period, which could be up to one year after the transaction date, subsequent adjustments are recorded to the Company’s consolidated statements of operations.

Goodwill and Intangible Assets—Goodwill represents the excess of purchase price over the fair value of the net assets of businesses acquired. Annually the Company either makes a qualitative assessment prior to proceeding to step 1 of the annual goodwill impairment test or performs a two-step impairment test. If the Company makes a qualitative assessment and it determines that the fair value of the reporting unit is less than its carrying amount, the Company would perform step 1 of the annual goodwill impairment test and, if necessary, proceed to step 2. Otherwise, no further evaluation is necessary. For the two-step impairment test, in the first step, the Company compares the fair value of the reporting unit to its carrying value, including goodwill. The Company determines the fair value of the reporting unit based on a weighting of income and market approaches. If the fair value of the reporting unit exceeds the carrying value of the net assets assigned to that unit, goodwill is not impaired and no further testing is performed. If the carrying value of the net assets assigned to the reporting unit exceeds the fair value of the reporting unit, then the Company performs the second step of the impairment test in order to determine the implied fair value of the reporting unit’s goodwill. Impairments, if any, are charged directly to earnings. The Company has a single reporting unit for purposes of assessing goodwill impairment. No impairment charges have been incurred to date.

Intangible assets include customer relationships and the Company’s core technology, are subject to amortization over their respective useful lives, and are classified in intangibles, net in the accompanying consolidated balance sheet. These intangibles are evaluated for impairment whenever events or changes in circumstances indicate that the carrying value of the assets may not be fully recoverable. If facts and circumstances indicate that the carrying value might not be recoverable, projected undiscounted net cash flows associated with the related asset or group of assets over their estimated remaining useful lives is compared against their respective carrying amounts. Trademarks are considered to be indefinite life intangibles, and are not amortized but are subject to testing for impairment annually. No impairments of intangible assets were identified in the years ended December 31, 2013, 2012 and 2011.

Revenue Recognition—The Company recognizes sales when persuasive evidence of an arrangement exists, title has transferred, the sales price is fixed or determinable, and collectability of the receivable is reasonably assured. Provisions for discounts, rebates, sales incentives, returns, and other adjustments are provided for in the period the related sales are recorded based on an assessment of historical trends and current projection of future results. Sales are recorded net of sales tax.

Cost of Sales—Cost of sales primarily consists of materials and labor expense in the manufacturing of the Company’s products. Cost of sales also includes provisions for excess and obsolete inventory, warranty costs, certain allocated costs for facilities, depreciation and other expenses associated with logistics and quality control. Additionally, it includes stock-based compensation for personnel directly involved with manufacturing the Company’s product offerings.

Sales and Marketing—Sales and marketing expenses include costs related to sales, customer service and marketing personnel, including their wages, employee benefits and related stock based compensation, and occupancy related expenses. Other significant sales and marketing expenses include race support and sponsorships of events and athletes, advertising and promotions related to trade shows, travel and entertainment, and promotional materials, products and sales offices costs.

Research and Development—Research and development expenses consist primarily of salaries and personnel costs, including wages, employee benefits and related stock based compensation for the Company’s engineering, research and development teams, occupancy related expenses, fees for third party consultants, service fees, and expenses for prototype tooling and materials, travel, and supplies. The Company expenses research and development costs as incurred.

General and Administrative—General and administrative expenses include costs related to executive, finance, information technology, human resources and administrative personnel, including wages, employee benefits and related stock based compensation expenses. The Company records professional and contract service expenses, occupancy related expenses associated with corporate locations and equipment, and legal expenses in general and administrative expenses. The Company paid annual management fees of $0.3 million, $0.5 million and $0.5 million to an affiliate of the Company’s majority stockholder, Compass Group Diversified Holdings LLC (“Compass”), which fees are included as part of general and administrative expenses. The Company terminated the management services agreement with Compass upon the consummation of the initial public offering (IPO) in August 2013.

 

F-9


Table of Contents

Stock-Based Compensation—The Company measures stock-based compensation for all stock-based awards, including stock options and restricted stock units (“RSUs”), based on their estimated fair values on the date of the grant and recognizes the stock-based compensation cost on a straight-line basis over the requisite service period. The fair value of each stock option granted is estimated using the Black-Scholes option pricing model, net of estimated forfeitures. The forfeiture rate is based on an analysis of the Company’s actual historical forfeitures. The fair value of the RSU’s is equal to the fair value of the Company’s common stock on the grant date of the award.

Shipping and Handling Fees and Costs—The Company includes shipping and handling fees billed to customers in sales. Shipping costs associated with inbound freight are capitalized as part of inventory and included in cost of sales as products are sold.

Income Taxes—The Company accounts for income taxes using an asset and liability approach. Deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Operating loss and tax credit carryforwards are measured by applying currently enacted tax laws. Valuation allowances are provided when necessary to reduce net deferred tax assets to an amount that is more likely than not to be realized.

The Company recognizes the tax effects of an uncertain tax position only if it is more likely than not to be sustained based solely on its technical merits as of the reporting date and then only in an amount more likely than not to be sustained upon review by the tax authorities. The Company considers many factors when evaluating and estimating its tax positions and tax benefits, which may require periodic adjustments and which may not accurately anticipate actual outcomes.

Advertising—Advertising costs are expensed as incurred. Costs incurred for advertising totaled $0.4 million, $0.5 million, and $0.4 million for the years ended December 31, 2013, 2012 and 2011.

Warranties—The Company offers limited warranties on its products for one to two years. The Company recognizes estimated costs related to warranty activities as a component of cost of sales upon product shipment. The estimates are based upon historical product failure rates and historical costs incurred in correcting product failures. The recorded amount is adjusted from time to time for specifically identified warranty exposures. Actual warranty expenses are charged against the Company’s estimated warranty liability when incurred. Factors that affect the Company’s liability include the number of units, historical and anticipated rates of warranty claims, and the cost per claim.

Fair Value of Financial Instruments—The carrying value of the Company’s financial instruments, including cash, accounts receivable and accounts payable approximate their fair value. Debt had an estimated fair value of $8.0 million and $58.4 million compared to a carrying value of $8.0 million and $59.3 million as of December 31, 2013 and 2012. The fair value is based on interest rates that are currently available to the Company for issuance of debt with similar terms and remaining maturities.

Recent Accounting Pronouncements

Comprehensive Income: Reclassifications—In February 2013, the FASB issued ASU No. 2013-02, “Reporting of Amounts Reclassified Out of Accumulated Other Comprehensive Income,” or ASU 2013-02, to supersede and replace the presentation requirements for reclassifications out of accumulated other comprehensive income in ASU 2011-05, which were deferred indefinitely under ASU No. 2011-12, “Deferral of the Effective Date for Amendments to the Presentation of Reclassifications of Items Out of Accumulated Other Comprehensive Income in Accounting Standards Update No. 2011-05,” or ASU 2011-12, issued in December 2011. The amendments in ASU 2013-02 would require an entity to provide additional information about reclassifications out of accumulated other comprehensive income by the respective line items of net income. For public entities, the amendments are effective for fiscal years, and interim periods within those years, beginning after December 15, 2012. The adoption of ASU 2013-02 did not have an impact on the Company’s financial position or results of operations.

Release of Cumulative Translation Adjustment—In March 2013, the FASB issued ASU No. 2013-05, “Parent’s Accounting for the Cumulative Translation Adjustment upon Derecognition of Certain Subsidiaries or Groups of Assets within a Foreign Entity or of an Investment in a Foreign Entity,” or ASU 2013-05, which resolves diversity in practice regarding the release of the cumulative translation adjustment into net income when a parent either sells a part or all of its investment in a foreign entity or no longer holds a controlling financial interest in a subsidiary or group of assets within a foreign entity. The amendments in ASU 2013-05 are effective prospectively for fiscal years, and interim periods within those years, beginning after December 15, 2013. Early adoption is permitted. The adoption of ASU 2013-05 did not have a material impact on the Company’s financial position or results of operations.

Comprehensive Income: Presentation—In June 2011, the FASB issued an accounting standards update that requires an entity to present the total of comprehensive income, the components of net income, and the components of other comprehensive income either in a single continuous statement of comprehensive income or in two separate but consecutive statements. This guidance eliminates the option to present the components of other comprehensive income as part of the statement of equity. The Company retrospectively adopted these new standards in the first quarter of 2012 and has presented a separate consolidated statement of comprehensive income for the years ended December 31, 2013, 2012 and 2011.

 

F-10


Table of Contents

2. Inventory

Inventory consisted of the following (in thousands):

 

     As of December 31,  
     2013      2012  

Raw materials

   $ 30,299       $ 25,822   

Work-in-process

     1,155         1,460   

Finished goods

     11,329         6,973   
  

 

 

    

 

 

 

Total inventory

   $ 42,783       $ 34,255   
  

 

 

    

 

 

 

3. Property and Equipment

Property and equipment consisted of the following (in thousands):

 

     As of December 31,  
     2013     2012  

Machinery and manufacturing equipment

   $ 13,744      $ 11,099   

Office equipment and furniture

     4,243        4,095   

Transportation equipment

     1,495        1,315   

Leasehold improvements

     5,525        4,729   
  

 

 

   

 

 

 

Total

     25,007        21,238   

Accumulated depreciation and amortization

     (11,589 )     (9,449 )
  

 

 

   

 

 

 

Net property and equipment

   $ 13,418      $ 11,789   
  

 

 

   

 

 

 

Depreciation and amortization expense was $2.4 million, $1.9 million and $1.4 million for the years ended December 31, 2013, 2012, and 2011, respectively.

4. Acquisition

On October 31, 2013, the Company completed the acquisition of certain assets of its Germany based distributor and service center, Toxoholics GmbH. The strategic acquisition of the German distributor and service center will build infrastructure and provide an accelerated path for better serving the Company’s customers and understanding the European market. The Company accounted for this transaction as a business combination. The total consideration transferred for the acquisition was $2.3 million and consisted of cash paid at closing of $1.1 million and $1.4 million of cash was paid in 2014. The total consideration was reduced by the effective settlement of a trade payables and receivables in the amount of $0.2 million, which represented the recorded amount and as a result, no gain or loss was recorded upon settlement. The $1.4 million of cash paid in 2014 is included in accounts payable on the accompanying consolidated balance sheet as of December 31, 2013. In allocating the purchase consideration based on fair values, the Company recorded approximately $0.5 million of acquired intangible assets with a useful life of six years, $0.6 million to goodwill and $1.2 million to net assets acquired. The goodwill balance is deductible for tax purposes.

 

F-11


Table of Contents

5. Goodwill and Intangible Assets

Intangible assets, excluding goodwill, are comprised of the following (in thousands):

 

     Gross
carrying
amount
     Accumulated
amortization
    Net
carrying
amount
     Weighted
average life
(years)
 

December 31, 2013:

          

Customer relationships OEM

   $ 7,400       $ (3,700 )   $ 3,700         11   

Customer relationships AM

     4,809         (3,239 )     1,570         7   

Core technology

     32,500         (24,375 )     8,125         7   

Patents

     835         (246 )     589         5   
  

 

 

    

 

 

   

 

 

    

Total

   $ 45,544       $ (31,560 )     13,984      
  

 

 

    

 

 

      

Trademarks, not subject to amortization

          13,300      
       

 

 

    

Total

        $ 27,284      
       

 

 

    

December 31, 2012:

          

Customer relationships OEM

   $ 7,400       $ (3,083 )   $ 4,317         11   

Customer relationships AM

     4,300         (2,688 )     1,612         7   

Core technology

     32,500         (20,313 )     12,187         7   

Patents

     835         (98 )     737         5   
  

 

 

    

 

 

   

 

 

    

Total

   $ 45,035       $ (26,182 )     18,853      
  

 

 

    

 

 

      

Trademarks, not subject to amortization

          13,300      
       

 

 

    

Total

        $ 32,153      
       

 

 

    

Goodwill activity consisted of the following (in thousands):

 

Balance as of December 31, 2012

   $ 31,372   

Acquisition of distributor

     559   

Effect of currency translation

     (6 )
  

 

 

 

Balance as of December 31, 2013

   $ 31,925   
  

 

 

 

The Company did not have any goodwill impairment during 2013, 2012 or 2011.

Amortization of intangibles was approximately $5.4 million, $5.3 million and $5.2 million for the years ended December 31, 2013, 2012, and 2011, respectively

Future amortization expense for finite-lived intangibles as of December 31, 2013 is as follows (in thousands):

 

Year

      

2014

   $ 5,449   

2015

     5,449   

2016

     837   

2017

     775   

2018

     775   

Thereafter

     699   
  

 

 

 

Total

   $ 13,984   
  

 

 

 

 

F-12


Table of Contents

6. Accrued Expenses

Accrued expenses consisted of the following (in thousands):

 

     As of December 31,  
     2013      2012  

Payroll and related expenses

   $ 6,007       $ 5,256   

Warranty

     3,857         4,582   

Related party-Compass (1)

     —           292   

Income tax payable

     2,469         9   

Other accrued expenses

     118         17   
  

 

 

    

 

 

 

Total

   $ 12,451       $ 10,156   
  

 

 

    

 

 

 

 

(1) The amount relates to interest and management fees payable to Compass

The Company’s warranty liability is included as a component of accrued liabilities in the consolidated balance sheets. Activity related to warranties is as follows (in thousands):

 

Balance at December 31, 2010

   $ 1,695   

Charge to cost of sales

     3,317   

Costs incurred

     (2,213 )
  

 

 

 

Balance at December 31, 2011

     2,799   

Charge to cost of sales

     5,180   

Costs incurred

     (3,397 )
  

 

 

 

Balance at December 31, 2012

     4,582   

Charge to cost of sales

     4,367   

Costs incurred

     (5,092 )
  

 

 

 

Balance at December 31, 2013

   $ 3,857   
  

 

 

 

7. Related Party Transactions

During fiscal year 2008, the Company entered into various loans with its majority stockholder, Compass, which provided a revolving line of credit facility and a term loan facility (“Prior Credit Facility”). Amounts outstanding under the Prior Credit Facility were $0 and $59.3 million as of December 31, 2013 and 2012, respectively. Interest expense on the Prior Credit Facility was approximately $2.2 million, $2.8 million and $1.8 million for the years ended December 31, 2013, 2012 and 2011, respectively. In addition, there were annual management fees of $0.3 million, $0.5 million and $0.5 million paid to an affiliate of Compass for the years ended December 31, 2013, 2012, and 2011, respectively.

Fox Factory, Inc. has a triple-net building lease for its manufacturing and office facilities in Watsonville, California. The building is owned by Robert Fox, a founder and minority stockholder of the Company. The term of the lease ends June 30, 2018, with monthly rental payments, which are adjusted annually for a cost-of-living increase based upon the consumer price index. Payments made under this lease were $1.2 million, $1.1 million and $1.1 million for the years ended December 31, 2013, 2012 and 2011, respectively. See Note 9 for a summary of the future minimum lease payments under this operating lease.

During the fiscal year ended December 31, 2011, The Company utilized Staffmark, a provider of temporary staffing, temp to hire and permanent placement services. Compass was an investor in Staffmark, up to October 2011, when the investment was sold. During the fiscal year ended December 31, 2011, Staffmark provided $7.1 million in temporary staffing services, of which $0.6 million was included in accounts payable as of December 31, 2011.

8. Debt

2013 Credit Facility

In August 2013, in connection with its IPO, the Company entered into a new revolving credit facility with SunTrust Bank and the

 

F-13


Table of Contents

other lenders named therein (2013 Credit Facility) and borrowed $28.5 million thereunder. Of such borrowings, $21.6 million was used to pay off the Company’s remaining indebtedness that was then due under the Prior Credit Facility, and the remaining amount of such borrowings was used to pay IPO related fees and expenses and provide additional working capital.

The 2013 Credit Facility provides for interest at a rate based on the London Interbank Offered Rate, or LIBOR, plus a margin ranging from 1.50% to 2.50%, or based on the prime rate offered by SunTrust Bank plus a margin ranging from 0.50% to 1.50%. The 2013 Credit Facility is secured, subject to permitted liens and other agreed upon exceptions, by a first-priority lien on and perfected security interest in substantially all of the Company’s and its subsidiary’s assets including accounts receivable and a pledge of the equity in its operating subsidiary. In addition, the 2013 Credit Facility requires that the Company satisfy a maximum total leverage ratio and a fixed charge coverage ratio. The 2013 Credit Facility contains customary representations and warranties and customary events of default, as well as certain affirmative and negative covenants, including restrictions on: indebtedness; liens; mergers, consolidations and acquisitions; sales of assets; engaging in business other than the Company’s current business and those reasonably related thereto; investments; dividends; redemptions and distributions; affiliate transactions; and other restrictions. The Company was in compliance with the covenants of the 2013 Credit Facility as of December 31, 2013. The balance at December 31, 2013 was classified as a long-term liability based on the maturity date of the 2013 Credit Facility.

The following table summarizes the 2013 Credit Facility (dollars in thousands):

 

     As of December 31, 2013  

Amount outstanding

   $ 8,000   

Available borrowing capacity

   $ 52,000   

Maximum borrowing capacity

   $ 60,000   

Interest rate at period end

     1.92 %

Maturity date

     August 7, 2018   

Prior Credit Facility

During fiscal year 2008, the Company entered into an intercompany loan agreement, the (“Prior Credit Facility”) with its majority stockholder, Compass. On June 18, 2012, as part of the recapitalization, the Company amended the Prior Credit Facility. The Prior Credit Facility was amended to (i) provide for Term A loan borrowings of $60.0 million and an increase to the revolving loan commitment of $2.0 million, increasing the total available under the Line of Credit to $30.0 million, (ii) extend the maturity dates of the term loans under the Loan Agreement to June 18, 2018, and (iii) modify borrowing rates under the Loan Agreement to a fluctuating rate between 3.50% and 5.50% above either LIBOR or the Prime Rate, respectively, whichever is more favorable for the Company. The Company’s obligations under the Prior Credit Facility with Compass were collateralized by the Company’s right, title and interest in the Company’s net assets except for certain excluded intangible assets as defined in the collateral agreement with Compass.

In August 2013, in connection with its IPO and entering into the 2013 Credit Facility, the Company repaid all indebtedness due under the Prior Credit Facility and the Prior Credit Facility was terminated. In connection with terminating the Prior Credit Facility, the Company recognized in the third quarter of 2013 a non-cash expense of approximately $1.4 million related to unamortized loan origination costs.

Amounts outstanding under the Prior Credit Facility consisted of the following (in thousands):

 

                         
     As of December 31,  
     2013      2012  

Line of credit

   $       —        $ 750   
  

 

 

    

 

 

 

Term A Loan

   $ —        $ 58,500   

Less current portion

     —          (3,000 )
  

 

 

    

 

 

 

Long-term debt less current portion

   $ —        $ 55,500   
  

 

 

    

 

 

 

The Prior Credit Facility contained financial covenants, with which the Company was in compliance as of agreement termination in August 2013 and at December 31, 2012. The line of credit carried an interest rate of 6.75% as of December 31, 2012. The balance under the line of credit at December 31, 2012 was classified as a long term liability as the maturity date was June 18, 2018.

9. Commitments and Contingencies

Operating Leases—The Company has operating lease agreements for office, research and development, and sales and marketing

 

F-14


Table of Contents

space that expire at various dates. The Company recognizes rent expense on a straight-line basis over the lease term and records the difference between cash rent payments and the recognition of rent expense as a deferred rent liability. Rent expense was $3.0 million, $2.8 million, and $2.2 million for the years ended December 31, 2013, 2012 and 2011, respectively. See Note 7 for additional information on related party operating leases.

Approximate remaining future minimum lease payments under these operating leases as of December 31, 2013, are as follows (in thousands):

 

Year

   Third party
future payments
     Related party
future payments
     Total future
payments
 

2014

   $ 1,860       $ 1,170       $ 3,030   

2015

     1,645         1,170         2,815   

2016

     1,330         1,170         2,500   

2017

     848         1,170         2,018   

2018

     51         585         636   

Thereafter

     —           —           —     
  

 

 

    

 

 

    

 

 

 
   $ 5,734       $ 5,265       $ 10,999   
  

 

 

    

 

 

    

 

 

 

The Company has entered into licensing and consulting agreements with various third parties, of which, non-cancelable future minimum payments under such agreements total $0.1 million as of December 31, 2013.

Indemnification Agreements—In the ordinary course of business, the Company may provide indemnifications of varying scope and terms to customers, vendors, lessors, business partners, and other parties with respect to certain matters, including, but not limited to, losses arising out of breach of such agreements, services to be provided by the Company or from intellectual property infringement claims made by third parties. In addition, the Company has entered into indemnification agreements with directors and certain officers and employees that will require the Company, among other things, to indemnify them against certain liabilities that may arise by reason of their status or service as directors, officers or employees. While the outcome of these matters cannot be predicted with certainty, the Company does not believe that the outcome of any claims under indemnification arrangements will have a material effect on the Company’s consolidated balance sheet, consolidated statements of income, consolidated statements of comprehensive income, or consolidated statements of cash flows.

10. Stock-Based Compensation

Equity Incentive Plans—The Company has outstanding awards under the following equity incentive plans: the 2008 Stock Option Plan (the “2008 Plan”), the 2008 Non-Statutory Stock Option Plan (the “2008 Non Statutory Plan”) and the 2013 Omnibus Plan, (the “2013 Plan”). All outstanding stock awards under the 2008 Plan and 2008 Non Statutory Plan will continue to be governed by their existing terms. No further awards will be granted pursuant to the 2008 Plan or the 2008 Non Statutory Plan. Under the 2013 Plan, the Company has the ability to issue incentive stock options, non-statutory stock options, stock appreciation rights, restricted stock awards, restricted stock units (“RSUs”), performance units and/or performance shares.

The equity incentive plans are administered by the board of directors (“Board”) of the Company or, if established by the Board, the Compensation Committee of the Board, which has the authority to determine the type of incentive award, as well as the terms and conditions of the awards, including (i) the number of shares of common stock subject to the award; (ii) when the award becomes exercisable; (iii) the award’s exercise price (if applicable); and (iv) the duration of the award. Awards have various vesting schedules. Options granted under the plans have vesting periods ranging from one to five years and expire no later than 10 years from the date of grant. RSUs generally vest over a four-year period with 25% vesting at the end of one year and the remaining vesting annually thereafter. As of December 31, 2013, 3,115,140 shares were available for grant under the 2013 Plan.

Restricted Stock Units—The Company began granting RSUs to its employees and directors in August 2013. The cost of the RSUs is determined using the fair value of the Company’s common stock on the date of grant. Stock-based compensation expense is amortized on a straight-line basis over the requisite service period.

The Company granted 516,269 RSUs during the year ended December 31, 2013. The Company recorded stock-based compensation expense related to RSUs of approximately $0.9 million in the year ended December 31, 2013. As of December 31, 2013, the Company had approximately $8.2 million of unrecognized stock-based compensation expense related to RSUs, which will be recognized over the remaining weighted-average vesting period of approximately 3.6 years.

 

F-15


Table of Contents

The following table summarizes the activities for the Company’s unvested RSUs for the year ended December 31, 2013:

 

     Unvested RSUs  
     Number of
shares
outstanding
     Weighted-
average
grant date
fair value
 

Unvested at December 31, 2012

     —         $ —     

Granted

     516,269       $ 17.53   

Vested

     —         $ —     

Forfeited

     —         $ —     
  

 

 

    

 

 

 

Unvested at December 31, 2013

     516,269       $ 17.53   
  

 

 

    

 

 

 

Stock option activity under the Plans was as follows:

 

     Number of
shares
outstanding
    Weighted-
average
exercise
price
     Weighted
average
remaining
contractual

life
(years)
     Aggregate
intrinsic value
(in thousands)
 

Balance at December 31, 2011

     4,546,618      $ 2.62         6       $ 16,218   

Options granted (weighted average fair value of $1.59 per share)

     1,891,536      $ 5.35         

Options exercised

     (3,763,518 )   $ 2.43         

Options forfeited

     (172,751 )   $ 5.94         
  

 

 

         

Balance at December 31, 2012

     2,501,885      $ 4.88         9       $ 6,828   

Options granted (weighted average fair value of $2.59 per share)

     9,290      $ 7.59         
  

 

 

         

Balance at December 31, 2013

     2,511,175      $ 4.88         8       $ 32,001   
  

 

 

         

Options vested and expected to vest—December 31, 2013

     2,511,175      $ 4.88         8       $ 32,001   
  

 

 

         

Options exercisable—December 31, 2013

     1,470,978      $ 4.47         7       $ 19,350   
  

 

 

         

Aggregate intrinsic value represents the difference between the closing price of the Company’s common stock on the Nasdaq Stock Exchange and the exercise price of outstanding, in-the-money options. The total intrinsic value of options exercised was approximately $11.3 million for the year ended December 31, 2012. There were no stock options exercised for the year ended December 31, 2013.

 

F-16


Table of Contents

A summary of options outstanding and exercisable as of December 31, 2013, is as follows:

 

     Options Outstanding  

Exercise prices

   Number
outstanding
     Weighted-average
remaining
contractual life
(years)
   Number
exercisable
 

$1.08

     149,569       4      149,569   

$2.16

     149,569       4      149,569   

$3.84

     92,900       7      55,740   

$5.16

     1,536,654       8      952,596   

$5.20

     125,415       7      50,166   

$5.95

     92,900       7      37,160   

$6.19

     6,503       8      6,503   

$6.20

     348,375       9      69,675   

$7.59

     9,290       9      —     
  

 

 

       

 

 

 
     2,511,175       8      1,470,978   
  

 

 

       

 

 

 

Employee Stock-Based Compensation—The fair value of options on the date of grant is estimated using the Black-Scholes option-pricing model using the single-option award approach with the weighted average assumptions set forth below. The Company estimates the expected term of options granted by taking the average of the vesting term and the contractual term of the option. Estimated volatilities are based on an analysis of comparable companies and the Company’s leverage. The Company bases the risk-free interest rate on the implied yield currently available on U.S. Treasury strips maturing at the expected option term. Although the Company paid a dividend in 2012 as part of the recapitalization, the Company does not intend to pay cash dividends in the future, as such, expected dividends are zero. Expected forfeitures are based on the Company’s historical experience.

In conjunction with the Company’s 2012 recapitalization, discussed in Note 8, modifications were made to certain employee stock option agreements. These modifications included the acceleration of vesting of options exercisable for the purchase of 902,105 shares of common stock and adding a net share settlement feature to the agreements. Additionally, certain stock option agreements were cancelled and replacement options were issued with a lower exercise price, pursuant to the grants anti-dilution provisions in the underlying agreements. The lower exercise price of the replacement options reflects the change in value of the underlying stock, which resulted from the recapitalization. Modification accounting was applied to the replacement options and any excess fair value of the replacement award over the fair value of the cancelled award will be recorded as compensation cost over the remaining vesting period of the grants. The vested options were exercised through a cashless net share settlement, and the resulting shares were immediately repurchased by Compass. Settlement accounting was applied to these options and stock-based compensation expense was recorded to recognize expense for the previously unvested portion.

The assumptions used to value stock-based awards granted were as follows:

 

     For the years ended December 31,  
     2013     2012     2011  

Expected term (years)

     5.5        5.5-6.5        6.5   

Volatility

     36 %     36 %     25 %

Risk-free interest rate

     0.79 %     0.60-1.40 %     3.31-3.41 %

Dividend yield

     —          —          —     

 

F-17


Table of Contents

The following table summarizes the allocation of stock-based compensation in the accompanying consolidated statements of income (in thousands):

 

     For the years ended December 31,  
     2013      2012      2011  

Cost of sales

   $ 23       $ —         $ —     

Sales and marketing

     158         160         78   

Research and development

     53         29         12   

General and administrative

     2,266         1,959         940   
  

 

 

    

 

 

    

 

 

 

Total

   $ 2,500       $ 2,148       $ 1,030   
  

 

 

    

 

 

    

 

 

 

As of December 31, 2013 unamortized stock-based compensation expense related to unvested common stock options was $1.5 million. The weighted average period over which such stock-based compensation expense will be recognized is approximately 2.7 years.

11. Earnings Per Share

Earnings Per Share—Basic earnings per share is computed by dividing net income for the period by the weighted average number of common shares outstanding during the period. Diluted earnings per share is computed by dividing net income for the period by the weighted average number of shares of common stock and potentially dilutive common stock outstanding during the period. Potentially dilutive common shares include shares issuable upon the exercise of outstanding stock options, which are reflected in diluted earnings per share by application of the treasury stock method.

The following table presents the calculation of basic and diluted earnings per share (in thousands except earnings per share):

 

     For the years ended December 31,  
     2013      2012      2011  

Net income

   $ 24,102       $ 14,210       $ 13,538   
  

 

 

    

 

 

    

 

 

 

Weighted average shares used to compute basic earnings per share

     34,571         32,059         30,030   

Dilutive effect of employee stock plans

     1,134         456         2,265   
  

 

 

    

 

 

    

 

 

 

Weighted average shares used to compute diluted earnings per share

     35,705         32,515         32,295   
  

 

 

    

 

 

    

 

 

 

Earnings per share:

        

Basic

   $ 0.70       $ 0.44       $ 0.45   

Diluted

   $ 0.68       $ 0.44       $ 0.42   

The Company did not exclude any potentially dilutive shares from the calculation of diluted earnings per share for the years ended December 31, 2013, 2012 and 2011 as none of these shares would have been antidilutive.

 

F-18


Table of Contents

12. Income Taxes

The components of income tax expense are as follows (in thousands):

 

     For the years ended December 31,  
     2013     2012     2011  

Current:

      

Federal

   $ 10,282      $ 8,959      $ 7,802   

State

     3,135        2,406        1,682   

Foreign

     385        —          —     
  

 

 

   

 

 

   

 

 

 

Total

     13,802        11,365        9,484   
  

 

 

   

 

 

   

 

 

 

Deferred:

      

Federal

     (2,912 )     (2,674 )     (2,025 )

State

     (324 )     (510 )     (405 )
  

 

 

   

 

 

   

 

 

 

Total

     (3,236 )     (3,184 )     (2,430 )
  

 

 

   

 

 

   

 

 

 

Total provision

   $ 10,566      $ 8,181      $ 7,054   
  

 

 

   

 

 

   

 

 

 

The following table presents a reconciliation of the statutory federal rate and the Company’s effective tax rate for the periods presented:

 

     For the years ended December 31,  
     2013     2012     2011  

Tax at federal statutory rate

     35.0 %     35.0 %     35.0 %

State taxes, net of federal benefit

     4.7        4.8        3.1   

Manufacturing deduction

     (2.9 )     (1.3 )     (3.8 )

Stock based compensation

     0.1        (2.5 )     1.7   

Research and development tax credit

     (2.7 )     —          (1.6 )

Change in liability for unrecognized tax benefits

     (3.7 )     —          —     

Other

     —          0.5        (0.1 )
  

 

 

   

 

 

   

 

 

 

Total provision

     30.5 %     36.5 %     34.3 %
  

 

 

   

 

 

   

 

 

 

 

F-19


Table of Contents

The following table presents the significant components of the Company’s deferred tax assets and liabilities for the periods presented (in thousands):

 

                                                       
    As of December 31,  
    2013     2012  

Deferred tax assets:

   

Allowance for doubtful accounts

  $ 72      $ 179   

Other reserves and prepaid assets

    3,464        2,716   

Inventory

    466        640   

State income taxes

    1,165        533   
 

 

 

   

 

 

 

Total deferred tax asset

    5,167        4,068   
 

 

 

   

 

 

 

Deferred tax liabilities:

   

Intangible assets

    (10,587 )     (12,761 )

Property and equipment

    (404 )     (524 )

Prepaid expenses

    (110     —     

Depreciation

    (2,581 )     (2,533 )
 

 

 

   

 

 

 

Total deferred tax liability

    (13,682 )     (15,818 )
 

 

 

   

 

 

 

Net deferred tax assets (liabilities)

  $ (8,515 )   $ (11,750 )
 

 

 

   

 

 

 

A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows (in thousands):

 

                                                       
    For the years ended December 31,  
    2013     2012  

Balance—beginning of period

  $ 7,292      $ 5,410   

Gross increases—current year tax positions

    1,896        1,882   

Gross decreases—expiration of statute of limitations

    (1,392     —     
 

 

 

   

 

 

 

Balance—end of period

  $ 7,796      $ 7,292   
 

 

 

   

 

 

 

As of December 31, 2013 and 2012, a portion of the unrecognized tax benefits would impact the effective tax rate if recognized. The Company expects approximately $1.6 million of unrecognized tax benefits to be recognized during the fiscal year 2014, based on the expiration of statute of limitations.

At December 31, 2013 and 2012, the Company had approximately $0.2 million of cumulative interest and penalties related to the uncertain tax positions, and has elected to treat interest and penalties as a component of income tax expense.

The Company’s tax returns remain open to examination as follows: U.S. federal, 2010 through 2013; U.S. states, generally 2009 through 2013.

13. Retirement Plan

The Company established a 401(k) plan to provide tax deferred salary deductions for all eligible employees. Participants may make voluntary contributions to the 401(k) plan, limited by certain Internal Revenue Service restrictions. The Company made matching contributions of $0.2 million for each of the fiscal years ended December 31, 2013, 2012, and 2011.

14. Segment and Geographic Areas

The Company has determined that it has a single operating and reportable segment. The Company considers operating segments to be components of the Company in which separate financial information is available that is evaluated regularly by the Company’s chief operating decision maker in deciding how to allocate resources and in assessing performance. The chief operating decision maker for the Company is the Chief Executive Officer. The Chief Executive Officer reviews financial information presented on a consolidated basis for purposes of allocating resources and evaluating financial performance.

 

F-20


Table of Contents

The following table summarizes total sales generated by geographic location of the customer (in thousands):

 

     For the years ended December 31,  
     2013      2012      2011  

United States

   $ 96,113       $ 84,283       $ 65,764   

International

     176,633         151,586         131,975   
  

 

 

    

 

 

    

 

 

 

Total Sales

   $ 272,746       $ 235,869       $ 197,739   
  

 

 

    

 

 

    

 

 

 

The Company’s long-lived assets by geographic location are as follows:

 

     As of December 31,  
     2013      2012  

United States

   $ 12,259       $ 11,429   

International

     1,159         360   
  

 

 

    

 

 

 

Total long-lived assets

   $ 13,418       $ 11,789   
  

 

 

    

 

 

 

15. Selected Quarterly Financial Data (Unaudited)

Selected summarized quarterly financial information for 2013 and 2012 is as follows:

 

     Quarter Ended  
     Dec 31,      Sep 30,      Jun 30,      Mar 31,      Dec 31,      Sep 30,      Jun 30,      Mar 31,  
     2013      2013      2013      2013      2012      2012      2012      2012  
     (dollars in thousands, except per share data)  

Sales

   $ 65,259       $ 82,293       $ 70,316       $ 54,878       $ 56,613       $ 72,864       $ 60,721       $ 45,671   

Gross profit

     18,716         25,333         20,365         15,715         13,165         20,119         16,446         13,099   

Income from operations

     7,803         14,773         10,143         6,062         4,017         10,978         6,868         4,291   

Net income

     4,907         9,924        5,721        3,549         1,785         5,469         4,317         2,639   

Earnings per share:

                       

Basic

   $ 0.14       $ 0.28       $ 0.17       $ 0.11       $ 0.05       $ 0.16       $ 0.14       $ 0.09   

Diluted

   $ 0.13       $ 0.27       $ 0.17       $ 0.10       $ 0.05       $ 0.16       $ 0.14       $ 0.08   

16. Subsequent Event

Acquisition

On March 5, 2014, we entered into a definitive agreement to acquire the business of Sport Truck USA (“Sport Truck”) a full service, globally recognized distributor, primarily of its own branded aftermarket suspension solutions and reseller of our products. Sport Truck also designs, markets, and distributes high quality lift kit solutions through their wholly owned subsidiaries BDS Suspension and Zone Offroad Products. The acquisition of Sport Truck is well-aligned with our mission of improving vehicle performance, delivering the best in-class service, and entering into strategic adjacent markets. We will acquire Sport Truck in an asset purchase transaction for approximately $44 million due at closing. The transaction is being financed with debt and includes a potential earn-out opportunity of up to a maximum of $29.3 million payable over the next three years contingent upon the achievement of certain performance based financial targets. The transaction is subject to approval by the employee stock ownership plan shareholders of Sport Truck and is also subject to customary closing conditions. The transaction is expected to close by the end of March 2014.

 

F-21