UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

 

 

Form 10-K/A
(Amendment No. 1)

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

 

 

 

 

 

COMMERCIAL VEHICLE GROUP, INC.

(Exact name of Registrant as specified in its charter)

 

 

Registrant’s telephone number, including area code:

(614) 289-5360

 

 

 

 

Securities registered pursuant to Section 12(b) of the Act:

 

 

Securities registered pursuant to Section 12(g) of the Act:

None

 

 

 

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes o     No þ

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Schedule 15(d) of the Act.  Yes o     No þ

 

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes þ     No o

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  þ

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes o     No þ

 

The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold on June 30, 2008, was $201,369,211.

 

As of February 27, 2009, 22,812,926 shares of Common Stock of the Registrant were outstanding.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Information required by Items 10, 11, 12, 13 and 14 of Part III of this Annual Report on Form 10-K/A are incorporated by reference from the Registrant’s Proxy Statement for its annual meeting to be held May 14, 2009 (the “2009 Proxy Statement”).

 

EXPLANATORY NOTE

Commercial Vehicle Group, Inc. is filing this Amendment No. 1 (the “Amendment”) to its Annual Report on Form 10-K for the fiscal year ended December 31, 2008 filed with the Securities and Exchange Commission on March 16, 2009 (the “Original Form 10-K”) to (1) amend Item 6 (Selected Financial Data), Item 7 (Management’s Discussion and Analysis of Financial Condition and Results of Operations) and Item 8 (Financial Statements) of Part II to correct (i) an error in the presentation of our borrowings under our prior revolving credit facility (“prior revolving credit facility”) and (ii) an error in the presentation in our consolidating guarantor and non-guarantor financial statements in the Original Form 10-K; and (2) amend Exhibit 12.1 to correct an error in the presentation of pre-tax income from operations in Exhibit 12.1 to the Original Form 10-K.

Subsequent to the issuance of our Original Form 10-K, an error in the presentation of our borrowings under our revolving credit facility was identified as of December 31, 2008. The borrowings under our prior revolving credit facility should have been classified as a current liability as a result of our use of the proceeds obtained from the new Loan and Security Agreement entered into on January 7, 2009, which was required to be classified as a current liability, to extinguish the prior revolving credit facility. As a result, the December 31, 2008 balance sheet presented in these consolidated financial statements has been corrected to properly classify approximately $14.8 million borrowed under our prior revolving credit facility as a current liability. This amount was previously presented as a component of long-term debt, net of current maturities. This error had no impact on our consolidated statement of operations or statement of cash flows. After considering both the quantitative effect of the correction and qualitative considerations, we have concluded that the error was not material to our previously filed financial statements.

A summary of the significant effects of the restatement on our consolidated balance sheet as of December 31, 2008 and on our selected financial data for the year ended December 31, 2008 is as follows (in thousands):

		Previously
		Reported				Restated
CURRENT LIABILITIES:
Current maturities of long-term debt, net		$	81			$	14,881
Total current liabilities			116,949				131,749
LONG-TERM DEBT, net of current maturities			164,814				150,014

		Previously
		Reported				Restated
Balance Sheet Data (at end of each period):
Working capital (current assets less current liabilities)		$	102,469			$	87,669

Subsequent to the issuance of our Original Form 10-K, an error was identified in Note 17, Consolidating Guarantor and Non-Guarantor Financial Information. This error had no impact to the consolidated statement of operations, balance sheets and statement of cash flows. As a result, we have corrected our previous presentation of “investment in subsidiaries” within the parent company to appropriately reflect our subsidiaries on an equity method basis (see Note 17). This change impacted the parent company, the guarantor companies and the non-guarantor companies columns in the statement of operations, balance sheets and statement of cash flows for all periods presented. The corrections primarily relate to: (i) reclassification of certain operations between the parent company, guarantor and non-guarantor columns, specifically the effects of foreign currency translation, interest expense and tax provision related adjustments; and (ii) accounting for certain equity transactions within the appropriate column, specifically tax based adjustments previously recorded in the guarantor companies column associated with the parent and non-guarantor and debt related transactions. These corrections had no impact on the consolidated statement of operations, balance sheets and statement of cash flows. After considering both the quantitative effect of the correction and qualitative considerations, we have concluded that the error was not material to our previously filed financial statements.

Subsequent to the issuance of our Original Form 10-K, we identified an error in pre-tax income from operations for the year ended December 31, 2008 as presented in Exhibit 12.1. In our presentation of pre-tax income from operations in Exhibit 12.1, we had excluded the charge for goodwill and intangible asset impairment. As a result, we have corrected pre-tax income from operations for the year ended December 31, 2008 in Exhibit 12.1 to include the effects of the charge for goodwill and intangible asset impairment. This error had no impact to the consolidated financial statements.

In this Amendment, we have updated the number of shares outstanding of our common stock at December 31, 2008 reflected on the cover page to include unvested restricted stock.

Except as described above, we have not modified or updated other disclosures contained in the Original Form 10-K. Accordingly, this Amendment with the exception of the foregoing does not reflect events occurring after the date of the Original Form 10-K or modify or update those disclosures affected by subsequent events. Consequently, all other information not affected by the corrections described above is unchanged and reflects the disclosures made at the date of the filing of the Original Form 10-K and should be read in conjunction with our filings with the Securities and Exchange Commission subsequent to the filing of the Original Form 10-K, including amendments to those filings, if any.

 

COMMERCIAL VEHICLE GROUP, INC.

 

Annual Report on Form 10-K/A

 

Table of Contents

 

CERTAIN DEFINITIONS

 

All references in this Annual Report on Form 10-K/A to the “Company,” “Commercial Vehicle Group,” “CVG,” “we,” “us,” and “our” refer to Commercial Vehicle Group, Inc. and its consolidated subsidiaries (unless the context otherwise requires).

 

FORWARD-LOOKING INFORMATION

 

This Annual Report on Form 10-K/A contains forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended. For this purpose, any statements contained herein that are not statements of historical fact, including without limitation, certain statements under “Item 1 — Business” and “Item 7 — Management’s Discussion and Analysis of Financial Condition and Results of Operations” and located elsewhere herein regarding industry prospects and our results of operations or financial position, may be deemed to be forward-looking statements. Without limiting the foregoing, the words “believes,” “anticipates,” “plans,” “expects,” and similar expressions are intended to identify forward-looking statements. The important factors discussed in “Item 1A — Risk Factors,” among others, could cause actual results to differ materially from those indicated by forward-looking statements made herein and presented elsewhere by management from time to time. Such forward-looking statements represent management’s current expectations and are inherently uncertain. Investors are warned that actual results may differ from management’s expectations. Additionally, various economic and competitive factors could cause actual results to differ materially from those discussed in such forward-looking statements, including, but not limited to, factors which are outside our control, such as risks relating to (i) our ability to develop or successfully introduce new products; (ii) risks associated with conducting business in foreign countries and currencies; (iii) general economic or business conditions affecting the markets in which we serve; (iv) increased competition in the heavy-duty truck or construction market; (v) our failure to complete or successfully integrate additional strategic acquisitions; (vi) the impact of changes in governmental regulations on our customers or on our business; (vii) the loss of business from a major customer or the discontinuation of particular commercial vehicle platforms and (viii) our ability to obtain future financing due to changes in the lending markets or our financial position. All subsequent written and oral forward-looking statements attributable to us or persons acting on our behalf are expressly qualified in their entirety by such cautionary statements.

 

 

Overview

 

Commercial Vehicle Group, Inc. (a Delaware corporation formed in August 2002) and its subsidiaries, is a leading supplier of fully integrated system solutions for the global commercial vehicle market, including the heavy-duty truck market, the construction and agriculture markets and the specialty and military transportation markets. Our products include static and suspension seat systems, electronic wire harness assemblies, controls and switches, cab structures and components, interior trim systems (including instrument panels, door panels, headliners, cabinetry and floor systems), mirrors and wiper systems specifically designed for applications in commercial vehicles.

 

We are differentiated from suppliers to the automotive industry by our ability to manufacture low volume customized products on a sequenced basis to meet the requirements of our customers. We believe that we have the number one or two position in most of our major markets and that we are the only supplier in the North American commercial vehicle market that can offer complete cab systems including cab body assemblies, sleeper boxes, seats, interior trim, flooring, wire harnesses, panel assemblies and other structural components. We believe our products are used by virtually every major North American commercial vehicle original equipment manufacturer (“OEM”), which we believe creates an opportunity to cross-sell our products and offer a fully integrated system solution.

 

Demand for our products is generally dependent on the number of new commercial vehicles manufactured, which in turn is a function of general economic conditions, interest rates, changes in governmental regulations, consumer spending, fuel costs and our customers’ inventory levels and production rates.

 

New commercial vehicle demand in the North American Class 8 truck market has historically been cyclical and is particularly sensitive to the industrial sector of the economy, which generates a significant portion of the freight tonnage hauled by commercial vehicles. Production of Class 8 heavy trucks in North America initially peaked in 1999 and experienced a downturn from 2000 to 2003 that was due to a weak economy, an oversupply of new and used vehicle inventory and lower spending on commercial vehicles and equipment. Demand for commercial vehicles improved from 2004 to 2006 due to broad economic recovery in North America, corresponding growth in the movement of goods, the growing need to replace aging truck fleets and OEMs receiving larger than expected pre-orders in anticipation of the new EPA emissions standards becoming effective in 2007. During 2007 and 2008, the demand for North American Class 8 heavy trucks experienced a downturn as a result of pre-orders in 2006 and weakness in the North American economy and corresponding decline in the need for commercial vehicles to haul freight tonnage in North America.

 

New commercial vehicle demand in the global construction equipment market generally follows certain economic conditions around the world. Within the construction market, there are two classes of construction equipment, the medium/heavy equipment market (weighing over 12 metric tons) and the light construction equipment market (weighing below 12 metric tons). Demand in the medium/heavy construction equipment market is typically related to the level of larger scale infrastructure development projects such as highways, dams, harbors, hospitals, airports and industrial development as well as activity in the mining, forestry and other raw material based industries. Demand in the light construction equipment market is typically related to certain economic conditions such as the level of housing construction and other smaller-scale developments and projects. Our products are primarily used in the medium/heavy construction equipment markets.

 

Industry

 

Within the commercial vehicle industry, we sell our products primarily to the global OEM truck market (approximately 44% of our 2008 revenues), the global construction OEM market (approximately 24% of our 2008 revenues) and the aftermarket and OEM service organizations (approximately 12% of our 2008 revenues). The majority of our remaining 20% of 2008 revenues was derived primarily from other global commercial vehicle and specialty markets.

Commercial Vehicle Supply Market Overview

 

Commercial vehicles are used in a wide variety of end markets, including local and long-haul commercial trucking, bus, construction, mining, general industrial, marine, municipal and recreation. The commercial vehicle supply industry can generally be separated into two categories: (1) sales to OEMs, in which products are sold in relatively large quantities directly for use by OEMs in new commercial vehicles; and (2) “aftermarket” sales, in which products are sold as replacements in varying quantities to a wide range of OEM service organizations, wholesalers, retailers and installers. In the OEM market, suppliers are generally divided into tiers — “Tier 1” suppliers (like our company), who provide their products directly to OEMs, and “Tier 2” or “Tier 3” suppliers, who sell their products principally to other suppliers for integration into those suppliers’ own product offerings.

 

Our largest end market, the commercial truck and construction industry, is supplied by heavy- and medium-duty commercial vehicle suppliers as well as automotive suppliers. The commercial vehicle supplier industry is highly fragmented and comprised of several large companies and many smaller companies. In addition, the commercial vehicle supplier industry is characterized by relatively low production volumes as well as considerable barriers to entry, including the following: (1) significant investment requirements, (2) stringent technical and manufacturing requirements, (3) high transition costs to shift production to new suppliers, (4) just-in-time delivery requirements and (5) strong brand name recognition. Foreign competition is limited in the commercial vehicle market due to many factors, including the need to be responsive to order changes on short notice, high shipping costs, customer concerns about quality given the safety aspect of many of our products and service requirements.

 

Although OEM demand for our products is directly correlated with new vehicle production, suppliers like us can also grow by increasing their product content per vehicle through cross selling and bundling of products, further penetrating business with existing customers, gaining new customers and expanding into new geographic markets and by increasing aftermarket sales. We believe that companies with a global presence and advanced technology, engineering, manufacturing and support capabilities, such as our company, are well positioned to take advantage of these opportunities.

 

North American Commercial Truck Market

 

Purchasers of commercial trucks include fleet operators, owner operators and other industrial end users. Commercial vehicles used for local and long-haul commercial trucking are generally classified by gross vehicle weight. Class 8 vehicles are trucks with gross vehicle weight in excess of 33,000 lbs. and Class 5 through 7 vehicles are trucks with gross vehicle weight from 16,001 lbs. to 33,000 lbs. The following table shows commercial vehicle production levels for 2001 through 2008 in North America:

 

 

 

Source: ACT N.A. Commercial Vehicle OUTLOOK (March 2009)

 

The following describes the major segments of the commercial vehicle market in which we compete:

 

Class 8 Truck Market

 

The global Class 8 truck manufacturing market is concentrated in three primary regions: North America, Europe and Asia-Pacific. The global Class 8 truck market is localized in nature due to the following factors: (1) the prohibitive costs of shipping components from one region to another, (2) the high degree of customization of Class 8 trucks to meet the region-specific demands of end users, and (3) the ability to meet just-in-time delivery requirements. According to ACT, four companies represented approximately 96% of North American Class 8 truck production in 2008. The percentages of Class 8 production represented by Daimler Trucks, International, PACCAR, and Volvo/Mack were approximately 31%, 26%, 24% and 15%, respectively. We supply products to all of these OEMs.

Production of commercial vehicles in North America initially peaked in 1999 and experienced a downturn from 2000 to 2003 that was due to a weak economy, reduced sales following above-normal purchases in advance of new EPA emissions standards that became effective in October 2002, an oversupply of new and used vehicle inventory and lower spending on commercial vehicles and equipment. Following a substantial decline from 1999 to 2001, Class 8 truck unit production increased modestly to approximately 181,000 units in 2002 from approximately 146,000 units in 2001, due primarily to the purchasing of trucks that occurred prior to the October 2002 mandate for more stringent engine emissions requirements. Subsequent to the engine emissions requirements, truck production continued to remain at historically low levels through mid-2003 due to continuing economic weakness and the reluctance of many trucking companies to invest during this period.

 

In mid-2003, evidence of renewed growth emerged and truck tonmiles (number of miles driven multiplied by number of tons transported) began to increase, along with new truck sales. During the second half of 2003, new truck dealer inventories declined and, consequently, OEM truck order backlogs began to increase. According to ACT, monthly truck order rates began increasing significantly from December 2003 through 2005. In 2006, OEMs received larger than expected pre-orders in anticipation of the new EPA emissions standards becoming effective in 2007. During 2007 and 2008, the demand for North American Class 8 heavy trucks experienced a downturn as a result of 2006 pre-orders, a weakness in the North American economy and corresponding decline in the need for commercial vehicles to haul freight tonnage in North America.

 

The following table illustrates North American Class 8 truck build for the years 1998 to 2013:

 

North American Class 8 Truck Build Rates
(In thousands)

 

 

“E” — Estimated
Source: ACT Commercial Vehicle OUTLOOK (March 2009)

 

According to ACT, unit production for 2009 is estimated to decrease approximately 29% from 2008 levels to approximately 145,000 units. We believe that the slight decrease from 2007 to 2008 was impacted by the weakness in the North American economy and corresponding decline in the need for commercial vehicles to haul freight tonnage in North America.

 

We believe the following factors are currently driving the North American Class 8 truck market:

 

Economic Conditions.  The North American truck industry is directly influenced by overall economic growth and consumer spending. Since truck OEMs supply the fleet lines of North America, their production levels generally match the demand for freight. The freight carried by these trucks includes consumer goods, machinery, food and beverages, construction equipment and supplies, electronic equipment and a wide variety of other materials. Since most of these items are driven by macroeconomic conditions, the truck industry tends to follow trends of gross domestic product (“GDP”). Generally, given the dependence of North American shippers on trucking as a freight alternative, general economic conditions have been a primary indicator of future truck builds.

Truck Freight Growth.  ACT projects that total U.S. freight composite, which is a measure of estimated freight hauled in a year calculated by weighting different sectors of the economy based on the amount of freight being generated by those sectors, will decrease in 2009. ACT forecasts that total U.S. freight composite will increase from 9.2 trillion in 2008 to 9.6 trillion in 2013, as summarized in the following graph:

 

Total U.S. Freight Composite
(In billions)

 

 

“E” — Estimated
Source: ACT Research Co. (2009).

 

Truck Replacement Cycle and Fleet Aging.  Since 1998, the average age of active Class 8 trucks has increased from approximately 5.5 years in 1998 to approximately 6.2 years in 2008. The average fleet age tends to run in cycles as freight companies permit their truck fleets to age during periods of lagging demand and then replenish those fleets during periods of increasing demand. Additionally, as truck fleets age, their maintenance costs typically increase. Freight companies must therefore continually evaluate the economics between repair and replacement. Other factors, such as inventory management and the growth in less-than-truckload freight shipping, also tend to increase fleet mileage and, as a result, the truck replacement cycle. The chart below illustrates the average age of active U.S. Class 8 trucks:

 

Average Age of Active U.S. Class 8 Trucks
(In years)

 

 

“E” — Estimated
Source: ACT Research Co. (2009).

Commercial Truck Aftermarket

 

Demand for aftermarket products tends to be counter cyclical to OEM demand because vehicle owners are more likely to repair vehicles than purchase new ones during recessionary periods. Therefore, aftermarket demand moderately increases during such periods. Demand for aftermarket products is driven by the quality of OEM parts, the number of vehicles in operation, the average age of the vehicle fleet, vehicle usage and the average useful life of vehicle parts. Aftermarket sales tend to be at a higher margin, as truck component suppliers are able to leverage their already established fixed cost base and exert moderate pricing power with their replacement parts. The recurring nature of aftermarket revenue provides some insulation to the overall cyclical nature of the industry, as it tends to provide a more stable stream of revenues.

 

Commercial Construction Vehicle Market

 

New commercial vehicle demand in the global construction equipment market generally follows certain economic conditions around the world. Within the construction market, there are two classes of construction equipment: the medium/heavy equipment market (weighing over 12 metric tons) and the light construction equipment market (weighing below 12 metric tons). Demand in the medium/heavy construction equipment market is typically related to the level of larger scale infrastructure development projects such as highways, dams, harbors, hospitals, airports and industrial development as well as activity in the mining, forestry and other raw material based industries. Demand in the light construction equipment market is typically related to certain economic conditions such as the level of housing construction and other smaller-scale developments and projects. Our products are primarily used in the medium/heavy construction equipment markets.

 

Purchasers of medium/heavy construction equipment include construction companies, municipalities, local governments, rental fleet owners, quarrying and mining companies and forestry related industries. Purchasers of light construction equipment include contractors, rental fleet owners, landscapers, logistics companies and farmers.

 

Military Equipment Market

 

We supply products for heavy- and medium-payload tactical trucks that are used by various military customers. Sales and production of these vehicles can be influenced by overall defense spending both by the U.S. government and foreign governments and the presence of military conflicts and potential military conflicts throughout the world. Demand for these vehicles is expected to increase as the result of the continuing conflict in the Middle East. In addition, demand has increased for remanufacturing and replacement of the large fleet of vehicles that have served in the Middle East due to over-use and new armor and technology requirements.

 

Commercial Vehicle Industry Trends

 

Our performance and growth are directly related to trends in the commercial vehicle market that are focused on driver retention, comfort and safety. These commercial vehicle industry trends include the following:

 

System Sourcing.  Commercial vehicle OEMs are seeking suppliers capable of providing fully-engineered, complete systems rather than suppliers who produce the separate parts that comprise a system. By outsourcing complete systems, OEMs are able to reduce the costs associated with the design and integration of different components and improve quality by requiring their suppliers to assemble and test major portions of the vehicle prior to beginning production. In addition, OEMs are able to develop more efficient assembly processes when complete systems are delivered in sequence rather than as individual parts or components.

 

Globalization of Suppliers.  Commercial vehicle OEMs manufacture and sell their products in various geographic markets around the world. Having operations in the geographic markets in which OEMs produce their global platforms enables suppliers to meet OEMs’ needs more economically and more efficiently.

 

Shift of Design and Engineering to Suppliers.  OEMs are focusing their efforts on brand development and overall vehicle design, instead of the design of individual vehicle systems. OEMs are increasingly looking to their suppliers to provide suggestions for new products, designs, engineering developments and manufacturing processes. As a result, strategic suppliers are gaining increased access to confidential planning information regarding

OEMs’ future vehicle designs and manufacturing processes. Systems and modules increase the importance of strategic suppliers because they generally increase the percentage of vehicle content.

 

Broad Manufacturing Capabilities.  With respect to commercial vehicle interiors, OEMs are requiring their suppliers to manufacture interior systems and products utilizing alternative materials and processes in order to meet OEMs’ demand for customized styling or cost requirements. In addition, while OEMs seek to differentiate their vehicles through the introduction of innovative interior features, suppliers are proactively developing new interior products with enhanced features.

 

Ongoing Supplier Consolidation.  We believe the worldwide commercial vehicle supply industry is continuing to consolidate as suppliers seek to achieve operating synergies through business combinations, shift production to locations with more flexible work rules and practices, acquire complementary technologies, build stronger customer relationships and follow their OEM customers as they expand globally. Suppliers need to provide OEMs with single-point sourcing of integrated systems and modules on a global basis, and this is expected to drive further industry consolidation. Furthermore, the cost focus of most major OEMs has forced suppliers to reduce costs and improve productivity on an ongoing basis, including economies of scale through consolidation.

 

Competitive Strengths

 

We believe that our competitive strengths include, but are not limited to, the following:

 

Leading Market Positions and Brands.  We believe that we are the leading supplier of seating systems and soft interior trim products, the only non-captive manufacturer of Class 8 truck body systems (which includes cab body assemblies) for the North American commercial vehicle heavy-truck market and one of the largest global suppliers of construction vehicle seating systems. Our products are marketed under brand names that are well known by our customers and truck fleet operators based upon the amount of revenue we derive from sales to these markets. These brands include KAB Seating, National Seating, Sprague Devices^®, Prutsman^tm, Moto Mirror^®, RoadWatch^® and Road Scan^®.

 

Comprehensive Cab Product and Cab System Solutions.  We believe that we offer the broadest product range of any commercial vehicle cab supplier. We manufacture a broad base of products, many of which are critical to the interior and exterior subsystems of a commercial vehicle cab. We believe we are the only supplier worldwide with the capability to manufacture and offer complete cab systems in sequence, integrating interior trim and seats with the cab structure and the electronic wire harness and instrument panel assemblies. We also utilize a variety of different processes, such as urethane molding, injection molding, large composite molding, thermoforming and vacuum forming that enable us to meet each customer’s unique styling and cost requirements. The breadth of our product offering enables us to provide a “one-stop shop” for our customers, who increasingly require complete cab solutions from a single supply source. As a result, we believe that we have a substantial opportunity for further customer penetration through cross-selling initiatives and by bundling our products to provide complete system solutions.

 

End-User Focused Product Innovation.  We believe that commercial vehicle market OEMs continue to focus on interior and exterior product design, comfort and features to better serve their end user, the driver, and our customers are seeking suppliers that can provide product innovation. We have a full service engineering and product development organization to assist OEMs in meeting their needs which helps enable us to secure content on current platforms and models.

 

Flexible Manufacturing Capabilities and Cost Competitive Position.  Because commercial vehicle OEMs permit their customers to select from an extensive menu of cab options, our customers frequently request modified products in low volumes within a limited time frame. We have a highly variable cost structure and can efficiently leverage our flexible manufacturing capabilities to provide low volume, customized products to meet each customer’s styling, cost and just-in-time delivery requirements. We manufacture or assemble our products at facilities in North America, Europe, China and Australia. Several of our facilities are located near our customers to reduce distribution costs and to maintain a high level of customer service and flexibility.

 

Global Capabilities.  Because many of our customers manufacture and sell their products on a global basis, we believe we have a strong competitive advantage by having dedicated sales, engineering, manufacturing and

assembly capabilities on a global basis. We have these capabilities to support our customers in North America, Europe, China and Australia.

 

Free Cash Flow Generation.  Our business benefits from modest capital expenditures and working capital requirements. Over the three years ended December 31, 2008, our consolidated capital expenditures averaged $17.4 million per year, which amounts to approximately 2% of consolidated net revenues.

 

Strong Relationships with Leading Customers and Major Fleets.  Because of our comprehensive product offerings, brand names and innovative product features, we believe we are an important long-term global supplier to many of the leading heavy-truck, construction and specialty commercial vehicle manufacturers such as International, PACCAR, Caterpillar, Daimler Trucks, Volvo/Mack, Oshkosh Corporation, Komatsu, MAN and Deere & Co. In addition, through our sales force and engineering teams, we maintain active relationships with the major heavy-duty truck fleet organizations that are end users of our products such as Yellow Roadway Corp., Swift Transportation, Schneider National and Ryder Leasing. As a result of our high-quality, innovative products, well-recognized brand names and customer service, a majority of the largest 100 fleet operators specifically request certain of our products.

 

Significant Barriers to Entry.  We believe we are a leader in providing critical cab assemblies and components to long running platforms. Considerable barriers to entry exist, including significant investment and engineering requirements, stringent technical and manufacturing requirements, high transition costs for OEMs to shift production to new suppliers, just-in-time delivery requirements and strong brand name recognition.

 

Proven Management Team.  Our management team is highly respected within the commercial vehicle market, and our seven senior executive officers have a combined average of 30 years of experience in the industry. We believe that our team has substantial depth in critical operational areas and has demonstrated success in reducing costs, integrating business acquisitions and improving processes through cyclical periods.

 

Strategy

 

Our primary growth strategies are as follows:

 

Increase Content, Expand Customer Penetration and Leverage System Opportunities.  We believe we are the only integrated commercial vehicle supplier that can offer complete interior cab systems. We are focused on securing additional sales from our existing customer base, and we actively cross-market a diverse portfolio of products to our customers to increase our content on the cabs manufactured by these OEMs. To complement our North American capabilities and enhance our customer relationships, we are working with OEMs as they increase their focus on international markets. We have established operations in Europe and Asia and are aggressively working to secure new business from both existing and new customers. We believe we are well positioned to capitalize on the migration toward commercial vehicle suppliers that can offer a complete cab systems, solutions and components.

 

Leverage Our New Product Development Capabilities.  We continue to invest in our engineering capabilities and new product development in order to anticipate the evolving demands of our customers and end users. For example, we recently launched a suite of custom-engineered products including a “Green” Concept Seat, the GSX 3000 Global Seat and an “Aero” Concept Mirror. In addition, we also developed an over-molded, multi-wire harness and a modular wiper system. We believe we will continue to design and develop new products that add or improve content and increase cab comfort and safety.

 

Capitalize on Operating Leverage.  We continuously seek ways to lower costs, enhance product quality, improve manufacturing efficiencies and increase product throughput and we continue to implement our Lean Manufacturing and Total Quality Production Systems (“TQPS”) programs. We believe our ongoing cost saving initiatives, supplier consolidation and sourcing efforts will enable us to continue to lower our manufacturing costs. As a result, we believe we are well positioned to improve our operating margins and capitalize on any volume increases with minimal additional capital expenditures.

 

Grow Sales to the Aftermarket.  While commercial vehicles have a relatively long life, certain components, such as seats, wipers and mirrors, are replaced more frequently; and unlike the new vehicle market, the North

American heavy duty truck aftermarket has been principally non-cyclical and grown steadily over the past several years. This growth has been driven primarily by an increasing number of vehicles in operation, growing average age of vehicles and number of miles driven per vehicle. We believe that there are opportunities to leverage our brand recognition to increase our sales to the replacement aftermarket. Since many aftermarket participants are small and locally focused, we plan to leverage our national presence to increase our market share in the fragmented aftermarket. We believe that the continued growth in the aftermarket represents an attractive opportunity to diversify our business due to its relative stability as well as the market penetration opportunity.

 

Pursue Strategic Acquisitions and Continue to Diversify Revenues.  We may selectively pursue complementary strategic acquisitions that allow us to leverage the marketing, engineering and manufacturing strengths of our business and expand our revenues to new and existing customers. The markets in which we operate are fragmented and provide for consolidation opportunities. Our acquisitions have enabled us to become a global supplier with the capability to offer complete cab systems in sequence, integrating interior trim and seats with the cab structure, to provide integrated electronic systems into our cab products and to expand the breadth of our interior systems capabilities. In addition, these acquisitions have allowed us to diversify our revenue base by customer, market, location or product offering.

 

Products

 

We offer OEMs a broad range of products and system solutions for a variety of end market vehicle applications that include local and long-haul commercial truck, construction, bus, agricultural, military, end market industrial, marine, municipal, recreation and specialty vehicle. We believe fleets and OEMs continue to focus on cabs and interiors to differentiate their products and improve driver comfort and retention. Although a portion of our products are sold directly to OEMs as finished components, we use most of our products to produce “systems” or “subsystems,” which are groups of component parts located throughout the vehicle that operate together to provide a specific vehicle function. Systems currently produced by us include cab bodies, sleeper boxes, seating, trim, body panels, storage cabinets, floor covering, mirrors, windshield wipers, headliners, window lifts, door locks, temperature measurement and wire harnesses. We classify our products into five general categories: (1) seats and seating systems, (2) electronic wire harnesses and panel assemblies. (3) cab structures, sleeper boxes, body panels and structural components (4) trim systems and components, and (5) mirrors, wipers and controls

 

See Notes 2 and 11 to our consolidated financial statements in Item 8 in this Annual Report on Form 10-K/A for information on our significant customer revenues and related receivables, as well as revenues by product category and geographical location.

 

Set forth below is a brief description of our products and their applications:

 

Seats and Seating Systems.  We design, engineer and produce seating systems primarily for heavy trucks in North America and for commercial vehicles used in the construction and agricultural industries through our European and Asian operations. For the most part, our seats and seating systems are fully-assembled and ready for installation when they are delivered to the OEM. We offer a wide range of seats that include air suspension seats, static seats and bus seats. As a result of our strong product design and product technology, we are a leader in designing seats with convenience features and enhanced safety. Seats and seating systems are the most complex and highly specialized products of our five product categories.

 

Heavy Truck Seats.  We produce seats and seating systems for heavy trucks in our North American operations. Our heavy truck seating systems are designed to achieve maximum driver comfort by adding a wide range of manual and power features such as lumbar supports, cushion and back bolsters and leg and thigh supports. Our heavy truck seats are highly specialized based on a variety of different seating options offered in OEM product lines. Our seats are built to customer specifications in low volumes and consequently are produced in numerous combinations with a wide range of price points.

 

We differentiate our seats from our competitors’ seats by focusing on three principal goals: driver comfort, driver retention and decreased workers’ compensation claims. Drivers of heavy trucks recognize and are often given the opportunity to specify their choice of seat brands, and we strive to develop strong customer loyalty both with the commercial vehicle OEMs and among drivers. We believe that we have superior technology and can offer a unique

seat base that is ergonomically designed, accommodates a range of driver sizes and absorbs shock to maximize driver comfort.

 

Construction and Other Commercial Vehicle Seats.  We produce seats and seating systems for commercial vehicles used in the global construction and agricultural, bus, military, commercial transport and municipal industries. The principal focus of these seating systems is durability. These seats are ergonomically designed for difficult working environments, to provide comfort and control throughout the range of seats and chairs.

 

Other Seating Products.  We also manufacture office seating products. Our office chair was developed as a result of our experience supplying chairs for the heavy truck, agricultural and construction industries and is fully adjustable to maximize comfort at work. Our office chairs are available in a wide variety of colors and fabrics to suit many different office environments, such as emergency services, call centers, receptions, studios, boardrooms and general office.

 

Electronic Wire Harnesses and Panel Assemblies.  We produce a wide range of electronic wire harnesses and related assemblies as well as panel assemblies used in commercial vehicles and other equipment. Set forth below is a brief description of our principal products in this category.

 

Electronic Wire Harnesses.  We offer a broad range of complex electronic wire harness assemblies that function as the primary current carrying devices used to provide electrical interconnections for gauges, lights, control functions, power circuits and other electronic applications on a commercial vehicle. Our wire harnesses are highly customized to fit specific end-user requirements. We provide our wire harnesses for a wide variety of commercial vehicles, military vehicles, specialty trucks, automotive and other specialty applications, including heavy-industrial equipment.

 

Panel Assemblies.  We assemble large, integrated components such as panel assemblies and cabinets for commercial vehicle OEMs and other heavy equipment manufacturers. The panels and cabinets we assemble are installed in key locations on a vehicle or unit of equipment, are integrated with our wire harness assemblies and provide user control over certain operational functions and features.

 

Cab Structures, Sleeper Boxes, Body Panels and Structural Components.  We design, engineer and produce complete cab structures, sleeper boxes, body panels and structural components for the commercial vehicle industry in North America. Set forth below is a description of our principal products in this category:

 

Cab Structures.  We design, manufacture and assemble complete cab structures used primarily in heavy trucks for the major commercial vehicle OEMs in North America. Our cab structures, which are manufactured from both steel and aluminum, are delivered to our customers fully assembled and primed for paint. Our cab structures are built to order based upon options selected by the vehicles’ end-users and delivered to the OEMs, in line sequence, as these end-users’ trucks are manufactured by the OEMs.

 

Sleeper Boxes.  We design, manufacture and assemble sleeper boxes primarily for heavy trucks in North America. We manufacture both integrated sleeper boxes that are part of the overall cab structure as well as standalone assemblies depending on the customer application. Sleeper boxes are typically constructed using aluminum exterior panels in combination with steel structural components delivered to our customers in line sequence after the final seal and E-coat process.

 

Bumper Fascias, Fender Covers and Fender Liners.  Our highly durable, lightweight bumper fascias and fender covers and liners are capable of withstanding repeated impacts that could deform an aluminum or steel bumper. We utilize a production technique that chemically bonds a layer of paint to the part after it has been molded, thereby enabling the part to keep its appearance even after repeated impacts.

 

Body Panels and Structural Components.  We produce a wide range of both steel and aluminum large exterior body panels and structural components for the internal production of our cab structures and sleeper boxes as well as being sold externally to certain commercial vehicle OEMs. In addition, we also manufacture composite body panels utilizing virtual engineered composite (“VEC”) technology.

 

Trim Systems and Components.  We design, engineer and produce trim systems and components for the interior cabs of commercial vehicles. Our interior trim products are designed to provide a comfortable interior for

the vehicle occupants as well as a variety of functional and safety features. The wide variety of features that can be selected by the heavy truck customer makes trim systems and components a complex and highly specialized product category. Set forth below is a brief description of our principal trim systems and components:

 

Trim Products.  Our trim products include A-Pillars, B-Pillars, door panels and interior trim panels. Door panels and interior trim panels consist of several component parts that are attached to a substrate. Specific components include vinyl or cloth-covered appliqués, armrests, map pocket compartments, carpet and sound-reducing insulation. Our products are attractive, lightweight solutions from a traditional cut and sew approach to a contemporary “molded” styling theme. The parts can be color matched or top good wrapped to integrate seamlessly with the rest of the interior.

 

Instrument Panels.  We produce and assemble instrument panels that can be integrated with the rest of the interior trim. The instrument panel is a complex system of coverings and foam, plastic and metal parts designed to house various components and act as a safety device for the vehicle occupant.

 

Body Panels (Headliners/Wall Panels).  Headliners consist of a substrate and a finished interior layer made of fabrics and materials. While headliners are an important contributor to interior aesthetics, they also provide insulation from road noise and can serve as carriers for a variety of other components, such as visors, overhead consoles, grab handles, coat hooks, electrical wiring, speakers, lighting and other electronic and electrical products. As the amount of electronic and electrical content available in vehicles has increased, headliners have emerged as an important carrier of electronic features such as lighting systems.

 

Storage Systems.  Our modular storage units and custom cabinetry are designed to improve comfort and convenience for the driver. These storage systems are designed to be integrated with the interior trim. These units may be easily expanded and customized with features that include refrigerators, sinks and water reservoirs. Our storage systems are constructed with durable materials and designed to last the life of the vehicle.

 

Floor Covering Systems.  We have an extensive and comprehensive portfolio of floor covering systems and dash insulators. Carpet flooring systems generally consist of tufted or non-woven carpet with a thermoplastic backcoating which, when heated, allows the carpet to be fitted precisely to the interior or trunk compartment of the vehicle. Additional insulation materials are added to minimize noise, vibration and harshness. Non-carpeted flooring systems, used primarily in commercial and fleet vehicles, offer improved wear and maintenance characteristics. The dash insulator separates the passenger compartment from the engine compartment and prevents engine noise and heat from entering the passenger compartment.

 

Sleeper Bunks.  We offer a wide array of design choices for upper and lower sleeper bunks for heavy trucks. All parts of our sleeper bunks can be integrated to match the rest of the interior trim. Our sleeper bunks arrive at OEMs fully assembled and ready for installation.

 

Grab Handles and Armrests.  Our grab handles and armrests are designed and engineered with specific attention to aesthetics, ergonomics and strength. Our products use a wide range of inserts and substrates for structural integrity. The integral urethane skin offers a soft touch and can be in-mold coated to specific colors.

 

Privacy Curtains.  We produce privacy curtains for use in sleeper cabs. Our privacy curtains include features such as integrated color matching of both sides of the curtain, choice of cloth or vinyl, full “black out” features and low-weight.

 

Mirrors, Wipers and Controls.  We design, engineer and produce a wide range of mirrors, wipers and controls used in commercial vehicles. Set forth below is a brief description of our principal products in this category:

 

Mirrors.  We offer a wide range of round, rectangular, motorized and heated mirrors and related hardware, including brackets, braces and side bars. Most of our mirror designs utilize stainless steel body, fasteners and support braces to ensure durability. We have introduced both road and outside temperature devices that are integrated into the mirror face or the vehicle’s dashboard through our RoadWatch^tm family of products. These systems are principally utilized by municipalities throughout North America to monitor surface temperatures and assist them in dispersing chemicals for snow and ice removal.

Windshield Wiper Systems.  We offer application-specific windshield wiper systems and individual windshield wiper components for all segments of the commercial vehicle market. Our windshield wiper systems are generally delivered to the OEM fully assembled and ready for installation. A windshield wiper system is typically comprised of an electric motor, linkages, arms, wiper blades, washer reservoirs and related pneumatic or electric pumps. We also supply air-assisted washing systems for headlights and cameras to assist drivers with visibility for safe vehicle operation. These systems utilize window wash fluid and air to create a turbulent liquid/air stream that removes road grime from headlights and cameras. We offer an optional programmable washing system that allows for periodic washing and dry cycles for maximum safety.

 

Controls.  We offer a range of controls and control systems that includes a complete line of window lifts and door locks, mechanic, pneumatic, electrical and electronic HVAC controls and electric switch products. We specialize in air-powered window lifts and door locks, which are highly reliable and cost effective as compared to similar electrical products.

 

Manufacturing

 

A description of the manufacturing processes we utilize for each of our principal product categories is set forth below:

 

 

We have a broad array of processes to offer our commercial vehicle OEM customers to enable us to meet their styling and cost requirements. The vehicle cab is the most significant and appealing aspect to the driver of the vehicle, and consequently each commercial vehicle OEM has unique requirements as to feel, appearance and features.

 

The end markets for our products are highly specialized and our customers frequently request modified products in low volumes within an expedited delivery timeframe. As a result, we primarily utilize flexible manufacturing cells at the vast majority of our production facilities. Manufacturing cells are clusters of individual

manufacturing operations and work stations grouped in a circular configuration, with the operators placed centrally within the configuration. This provides flexibility by allowing efficient changes to the number of operations each operator performs. When compared to the more traditional, less flexible assembly line process, cell manufacturing allows us to maintain our product output consistent with our OEM customers’ requirements and reduce the level of inventory.

 

When an end-user buys a commercial vehicle, the end-user will specify the seat and other features for that vehicle. Because each of our seating systems is unique, our manufacturing facilities have significant complexity which we manage by building in sequence. We build our seating systems as orders are received, and systems are delivered to the customer’s rack in the sequence in which vehicles come down the assembly line. We have systems in place that allow us to provide complete customized interior kits in boxes that are delivered in sequence, and we intend to expand upon these systems such that we will be able to provide, in sequence, fully integrated modular systems combining the cab body and interior and seating systems.

 

In many instances, we keep track of our build sequence by vehicle identification number and components are identified by bar code. Sequencing reduces our cost of production because it eliminates warehousing costs and reduces waste and obsolescence, offsetting any increased labor costs. Several of our manufacturing facilities are strategically located near our customers’ assembly plants, which facilitates this process and minimizes shipping costs.

 

We employ just-in-time manufacturing and system sourcing in our operations to meet customer requirements for faster deliveries and to minimize our need to carry significant inventory levels. We utilize material systems to manage inventory levels and, in certain locations, we have inventory delivered as often as two times per day from a nearby facility based on the previous day’s order. This eliminates the need to carry excess inventory at our facilities.

 

Typically, in a strong economy, new vehicle production increases and greater funding is available to be spent on enhancements to the truck interior. As demand goes up, the mix of our products shifts towards more expensive systems, such as sleeper units, with enhanced features and higher quality materials. The shift from low-end units to high-end units amplifies the positive effect a strong economy has on our business. Conversely, when economic conditions and indicators decline and customers shift away from ordering high-end units with enhanced features, our business is adversely affected from both lower volume and lower pricing. We strive to manage down cycles by running our facilities at capacity while maintaining the capability and flexibility to expand. We have plans to work with our employees and rely on their involvement to help minimize problems and re-align our capacity during fluctuating periods of increased or decreased production levels to achieve on-time delivery.

 

As a means to enhance our operations, we continue to implement TQPS throughout our operations. TQPS is our customized version of Lean Manufacturing and consists of a 32 hour interactive class that is taught exclusively by members of our management team. TQPS is an analytical process in which we analyze each of our manufacturing cells and identify the most efficient process to improve efficiency and quality. The goal is to achieve total cost management and continuous improvement. Some examples of TQPS-related improvements are: reduced labor to move parts around the facility, clear walking paths in and around manufacturing cells and increased safety. An ongoing goal is to reduce the time employees spend waiting for materials within a facility. In an effort to increase operational efficiency, improve product quality and provide additional capacity, we intend to continue to implement TQPS improvements at each of our manufacturing facilities.

 

Raw Materials and Suppliers

 

A description of the principal raw materials we utilize for each of our principal product categories is set forth below:

 

 

 

Our supply agreements generally provide for fixed pricing but do not require us to purchase any specified quantities. We have not experienced any significant shortages of raw materials and normally do not carry inventories of raw materials or finished products in excess of those reasonably required to meet production and shipping schedules as well as service requirements. Steel, aluminum, petroleum-based products, copper, resin, foam, fabrics, wire and wire components comprise the most significant portion of our raw material costs. We typically purchase steel, copper and petroleum-based products at market prices, which over the last several years, have increased significantly. As a result, we are being assessed surcharges and price increases on our purchases of steel, copper and petroleum-related products. We continue to work with our customers and suppliers to minimize the impact of such surcharges. Near the end of 2008, we began to see a reduction in the base prices for steel, copper and petroleum-based products, which we are using as leverage to pursue reductions in the related surcharges. Additionally, we continue to work diligently to find alternative supply sources to ensure we are buying at attractive prices. Certain component purchases and suppliers are directed by our customers. We do not believe we are dependent on a single supplier or limited group of suppliers for our raw materials.

 

Customers and Marketing

 

We sell our products principally to the commercial vehicle OEM truck market. Approximately 44% of our 2008 revenues and approximately 41% of our 2007 revenues were derived from sales to commercial vehicle truck OEMs, with the remainder of our revenues being generated principally from sales to the construction, aftermarket and OEM service markets.

 

We supply our products primarily to the OEM truck market, construction market, the aftermarket and OEM service segment and other commercial vehicle and specialty markets. The following is a summary of our revenues by end-user market based on final destination customers and markets for the three years ended December 31:

 

Our principal customers in North America include International, PACCAR, Caterpillar, Daimler Trucks and Volvo/ Mack. We believe we are an important long-term supplier to all leading truck manufacturers in North America because of our comprehensive product offerings, leading brand names and product innovation. In our European, China and Australian operations, our principal customers in the commercial vehicle market include Caterpillar, MAN, Komatsu, Volvo, Iveco, Hitachi, JCB Limited and CNH Global (Case New Holland).

 

The following is a summary of our significant revenues based on final destination customers and markets by OEM customer for the three years ended December 31:

 

 

Except as set forth in the above table, no other customer accounted for more than 10% of our revenues for the three years ended December 31, 2008.

 

Our European, China, Australian and Mexican operations collectively contributed approximately 26%, 23% and 13% of our revenues for the years ended December 31, 2008, 2007 and 2006, respectively. The change in revenue by geographic location in 2008 is primarily related to the impact of our PEKM acquisition.

 

Our OEM customers generally source business to us pursuant to written contracts, purchase orders or other firm commitments in terms of price, quality, technology and delivery. Awarded business generally covers the supply of all or a portion of a customer’s production and service requirements for a particular product program rather than the supply of a specific quantity of products. In general, these contracts, purchase orders and commitments provide that the customer can terminate the contract, purchase order or commitment if we do not meet specified quality, delivery and cost requirements. Such contracts, purchase orders or other firm commitments generally extend for the entire life of a platform, which is typically five to seven years. Although these contracts, purchase orders or other commitments may be terminated at any time by our customers (but not by us), such terminations have been minimal and have not had a material impact on our results of operations. In order to reduce our reliance on any one vehicle model, we produce products for a broad cross-section of both new and more established models.

 

Our contracts with our major OEM customers generally provide for an annual productivity cost reduction. These reductions are calculated on an annual basis as a percentage of the previous year’s purchases by each customer. The reduction is achieved through engineering changes, material cost reductions, logistics savings, reductions in packaging cost and labor efficiencies. Historically, most of these cost reductions have been offset by both internal reductions and through the assistance of our supply base, although no assurances can be given that we will be able to achieve such reductions in the future. If the annual reduction targets are not achieved, the difference is recovered through price reductions. Our cost structure is comprised of a high percentage of variable costs that provides us with additional flexibility during economic cycles.

 

Our sales and marketing efforts with respect to our OEM sales are designed to create overall awareness of our engineering, design and manufacturing capabilities and to enable us to be selected to supply products for new and redesigned models by our OEM customers. Our sales and marketing staff works closely with our design and engineering personnel to prepare the materials used for bidding on new business as well as to provide a consistent interface between us and our key customers. We currently have sales and marketing personnel located in every

major region in which we operate. From time to time, we also participate in industry trade shows and advertise in industry publications. One of our ongoing initiatives is to negotiate and enter into long term supply agreements with our existing customers that allow us to leverage all of our business and provide a complete cab system to our commercial vehicle OEM customers.

 

Our principal customers for our aftermarket sales include OEM dealers and independent wholesale distributors. Our sales and marketing efforts for our aftermarket sales are focused on support of these two distribution chains, as well as direct contact with all major fleets.

 

Backlog

 

We do not generally obtain long-term, firm purchase orders from our customers. Rather, our customers typically place annual blanket purchase orders, but these orders do not obligate them to purchase any specific or minimum amount of products from us until a release is issued by the customer under the blanket purchase order. Releases are typically placed within 30 to 90 days of required delivery and may be canceled at any time, in which case the customer would be liable for work in process and finished goods. We do not believe that our backlog of expected product sales covered by firm purchase orders is a meaningful indicator of future sales since orders may be rescheduled or canceled.

 

Competition

 

Within each of our principal product categories, we compete with a variety of independent suppliers and with OEMs’ in-house operations, primarily on the basis of price, breadth of product offerings, product quality, technical expertise, development capability, product delivery and product service. We believe we are the only supplier in the North American commercial vehicle market that can offer complete cab systems in sequence integrating interior systems (including seats, interior trim and flooring systems), mirrors and wire harnesses with the cab structure. A summary of our estimated market position and primary independent competitors is set forth below:

 

 

Research and Development, Design and Engineering

 

We have invested in a state-of-the-art research and development technology center. The facility includes secure design areas for our customers. From concept to prototyping, we offer our customers complete integrated design, prototype and evaluation services that are necessary in today’s demanding markets. With state-of-the-art laboratories for virtual driving, acoustics, thermal efficiency, durability, biomechanics, comfort, prototyping and process prove-out, we design integrated solutions for the end-user, the fleet manager and the OEM.

 

Our objective is to be a leader in offering superior quality and technologically advanced products to our customers at competitive prices. We engage in ongoing engineering and research and development activities to improve the reliability, performance and cost-effectiveness of our existing products and to design and develop new products for existing and new applications.

 

We generally work with our customers’ engineering and development teams at the beginning of the design process for new components and assemblies, or the redesign process for existing components and assemblies, in order to maximize production efficiency and quality. These processes may take place from one to three years prior to the commencement of production. On average, the development time for a new component takes between 12 and 24 months during the design phase, while the re-engineering of an existing part may take between one and six months. Early design involvement can result in a product that meets or exceeds the customer’s design and performance requirements and is more efficient to manufacture. In addition, our extensive involvement enhances our position for bidding on such business. We work aggressively to ensure that our quality and delivery metrics distinguish us from our competitors.

 

We focus on bringing our customers integrated products that have superior content, comfort and safety. Consistent with our value-added engineering focus, we place a large emphasis on the relationships with the engineering departments of our customers. These relationships not only help us to identify new business opportunities but also enable us to compete based on the quality of our products and services, rather than exclusively on price.

 

We are currently involved in the design stage of several products for our customers and expect to begin production of these products in the years 2009 to 2012.

 

Intellectual Property

 

We consider ourselves to be a leader in both product and process technology, and, therefore, protection of intellectual property is important to our business. Our principal intellectual property consists of product and process technology, a limited number of United States and foreign patents, trade secrets, trademarks and copyrights. Although our intellectual property is important to our business operations and in the aggregate constitutes a valuable asset, we do not believe that any single patent, trade secret, trademark or copyright, or group of patents, trade secrets, trademarks or copyrights is critical to the success of our business. Our policy is to seek statutory protection for all significant intellectual property embodied in patents, trademarks and copyrights. From time to time, we grant licenses under our patents and technology and receive licenses under patents and technology of others.

 

We market our products under brand names that include KAB Seating, National Seating, Sprague Devices^®, Prutsman^tm, Moto Mirror^®, RoadWatch^® and Road Scan^®. We believe that our brands are valuable and are increasing in value with the growth of our business, but that our business is not dependent on such brands. We own U.S. federal trademark registrations for several of our brands.

 

Seasonality

 

OEMs’ production requirements can fluctuate as the demand for new vehicles soften during the holiday seasons in North America, Europe and Asia as OEM manufacturers generally close their production facilities at various times during the year.

Employees

 

As of December 31, 2008, we had approximately 5,905 permanent employees, of which approximately 18% were salaried and the remainder were hourly. Approximately 48% of the employees in our North American operations were unionized, and approximately 58% of our employees at our Europe and Asia operations were represented by shop steward committees. We have not experienced any material strikes, lockouts or work stoppages during 2008 and consider our relationship with our employees to be satisfactory. On an as needed basis during peak periods, contract and temporary employees are utilized. During periods of weak demand, we respond to reduced volumes through flexible scheduling, furloughs and reductions in force as necessary.

 

Environmental Matters

 

We are subject to foreign, federal, state, and local laws and regulations governing the protection of the environment and occupational health and safety, including laws regulating air emissions, wastewater discharges, the generation, storage, handling, use and transportation of hazardous materials; the emission and discharge of hazardous materials into the soil, ground or air; and the health and safety of our colleagues. We are also required to obtain permits from governmental authorities for certain of our operations. We cannot assure you that we are, or have been, in complete compliance with such environment and safety laws, regulations and permits. If we violate or fail to comply with these laws, regulations or permits, we could be fined or otherwise sanctioned by regulators. In some instances, such a fine or sanction could have a material adverse effect on us. The environmental laws to which we are subject have become more stringent over time, and we could incur material expenses in the future to comply with environmental laws. We are also subject to laws imposing liability for the cleanup of contaminated property. Under these laws, we could be held liable for costs and damages relating to contamination at our past or present facilities and at third party sites to which we sent waste containing hazardous substances. The amount of such liability could be material.

 

Several of our facilities are either certified as, or are in the process of being certified as ISO 9001, 14000, 14001 or TS16949 (the international environmental management standard) compliant or are developing similar environmental management systems. Although we have made, and will continue to make, capital expenditures to implement such environmental programs and comply with environmental requirements, we do not expect to make material capital expenditures for environmental controls in 2009 or 2010. The environmental laws to which we are subject have become more stringent over time, and we could incur material costs or expenses in the future to comply with environmental laws.

 

Certain of our operations generate hazardous substances and wastes. If a release of such substances or wastes occurs at or from our properties, or at or from any offsite disposal location to which substances or wastes from our current or former operations were taken, or if contamination is discovered at any of our current or former properties, we may be held liable for the costs of cleanup and for any other response by governmental authorities or private parties, together with any associated fines, penalties or damages. In most jurisdictions, this liability would arise whether or not we had complied with environmental laws governing the handling of hazardous substances or wastes.

 

Government Regulations

 

Although the products we manufacture and supply to commercial vehicle OEMs are not subject to significant government regulation, our business is indirectly impacted by the extensive governmental regulation applicable to commercial vehicle OEMs. These regulations primarily relate to emissions and noise standards imposed by the Environmental Protection Agency (“EPA”), state regulatory agencies, such as the California Air Resources Board (“CARB”), and other regulatory agencies around the world. Commercial vehicle OEMs are also subject to the National Traffic and Motor Vehicle Safety Act and Federal Motor Vehicle Safety Standards promulgated by the National Highway Traffic Safety Administration. Changes in emission standards and other proposed governmental regulations could impact the demand for commercial vehicles and, as a result, indirectly impact our operations. For example, new emission standards governing Heavy-duty (Class 8) diesel engines that went into effect in the United States on October 1, 2002 and January 1, 2007 resulted in significant purchases of new trucks by fleet operators prior to such date and reduced short term demand for such trucks in periods immediately following such date. New

emission standards for truck engines used in Class 5 to 8 trucks imposed by the EPA and CARB are scheduled to become effective in 2010.

 

Available Information

 

We maintain a website on the Internet at www.cvgrp.com. We make available free of charge through our website, by way of a hyperlink to a third-party Securities Exchange Commission (SEC) filing website, our Annual Reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports electronically filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act of 1934. Such information is available as soon as such reports are filed with the SEC. Additionally, our Code of Ethics may be accessed within the Investor Relations section of our website. Information found on our website is not part of this Annual Report on Form 10-K/A or any other report filed with the SEC.

 

Executive Officers of Registrant

 

The following table sets forth certain information with respect to our executive officers as of February 27, 2009:

 

 

The following biographies describe the business experience of our executive officers:

 

Gerald L. Armstrong has served as President and General Manager of Cab Systems since December 2008. From November 2006 to December 2008, Mr. Armstrong served as President — CVG Global Truck. From April 2004 to November 2006, Mr. Armstrong served as President — CVG Americas and from July 2002 to April 2004 as Vice President and General Manager of National Seating and KAB North America. Prior to joining us, Mr. Armstrong served from 1995 to 2000 and from 2000 to July 2002 as Vice President and General Manager, respectively, of Gabriel Ride Control Products, a manufacturer of shock absorbers and related ride control products for the automotive and light truck markets, and a wholly-owned subsidiary of ArvinMeritor Inc. Mr. Armstrong began his service with ArvinMeritor Inc., a manufacturer of automotive and commercial vehicle components, modules and systems in 1987, and served in various positions of increasing responsibility within its light vehicle original equipment and aftermarket divisions before starting at Gabriel Ride Control Products. Prior to 1987, Mr. Armstrong held various positions of increasing responsibility including Quality Engineer and Senior Quality Supervisor and Quality Manager with Schlumberger Industries and Hyster Corporation.

 

W. Gordon Boyd has served as Senior Advisor to the Chief Executive Officer since December 2008. From November 2006 to December 2008, Mr. Boyd served as President — CVG Global Construction. From June 2005 to November 2006, Mr. Boyd served as President — CVG International and prior thereto served as our President — Mayflower Vehicle Systems from the time we completed the acquisition of Mayflower in February 2005. Mr. Boyd joined Mayflower Vehicle Systems U.K. as Manufacturing Director in 1993. In 2002, Mr. Boyd became President and Chief Executive Officer of MVS, Inc.

 

Mervin Dunn has served as a Director since August 2004 and as our President and Chief Executive Officer since June 2002, and prior thereto served as the President of Trim Systems, commencing upon his joining us in October 1999. From 1998 to 1999, Mr. Dunn served as the President and Chief Executive Officer of Bliss Technologies, a heavy metal stamping company. From 1988 to 1998, Mr. Dunn served in a number of key leadership

roles at Arvin Industries, including Vice President of Operating Systems (Arvin North America), Vice President of Quality, and President of Arvin Ride Control. From 1985 to 1988, Mr. Dunn held several key management positions in engineering and quality assurance at Johnson Controls Automotive Group, an automotive trim company, including Division Quality Manager. From 1980 to 1985, Mr. Dunn served in a number of management positions for engineering and quality departments of Hyster Corporation, a manufacturer of heavy lift trucks. Mr. Dunn also currently serves as a director of Transdigm Group, Inc.

 

Kevin R.L. Frailey has served as Executive Vice President and General Manager for Electrical Systems since December 2008 and prior thereto served as the Executive Vice President of Business Development from February 2007 to December 2008. Prior to joining us, Mr. Frailey served as Vice President and General Manager for Joint Ventures and Business Strategy at ArvinMeritor’s Emissions Technologies Group from 2003 to early 2007. From 1988 to 2007, Mr. Frailey held several key management positions in engineering, sales and worldwide supplier development at ArvinMeritor. In addition, during that time Mr. Frailey served on the board of various joint ventures, most notably those of Arvin Sango, Inc., and AD Tech Co., Ltd.

 

Milton D. Kniss has served as Executive Vice President and General Manager for Seating Systems since December 2008, and prior thereto served as Vice President of Operations for Global Truck since March 2008 and Vice President of Strategic Integration since March 2007. Prior to joining us, Mr. Kniss served as President of the Control Systems Division of Dura Automotive Systems, Inc. (“Dura”) from 2000 to 2007. In October 2006, Dura filed a voluntary petition for reorganization under the federal bankruptcy laws. From 1981 to 2000, Mr. Kniss held several key management positions in operations at Dura.

 

Chad M. Utrup has served as the Chief Financial Officer since January 2003 and as an Executive Vice President since January 2009, and prior thereto served as the Vice President of Finance at Trim Systems since 2000. Prior to joining us in February 1998, Mr. Utrup served as a project management group member at Electronic Data Systems. While with Electronic Data Systems, Mr. Utrup’s responsibilities included financial support and implementing cost recovery and efficiency programs at various Delphi Automotive Systems support locations.

 

James F. Williams has served as the Vice President of Organizational Development since December 2008, and prior thereto served as Vice President of Human Resources since August 1999. Prior to joining us, Mr. Williams served as Corporate Vice President of Human Resources and Administration for SPECO Corporation from January 1996 to August 1999. From April 1984 to January 1996, Mr. Williams served in various key human resource management positions in General Electric’s Turbine, Lighting and Semi Conductor business. In addition, Mr. Williams served as Manager of Labor Relations and Personnel Services at Mack Trucks’ Allentown Corporate location from 1976 to 1984.

 

 

You should carefully consider the risks described below before making an investment decision. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also impair our business operations.

 

If any of these certain risks and uncertainties were to actually occur, our business, financial condition or results of operations could be materially adversely affected. In such case, the trading price of our common stock could decline and you may lose all or part of your investment. These risks and uncertainties include, but are not limited to, the following:

 

 

Our results of operations are directly impacted by changes in the United States economy and global economic conditions. The significant downturn in the United States and global economies during the fourth quarter of 2008 lowered demand for our products. This lower demand reduced our revenues by approximately 8% for the three months ended December 31, 2008 compared to the prior year period and reduced our operating income. It is uncertain if economic conditions will deteriorate further, or when economic conditions will improve. A prolonged recession could result in lower earnings and reduced cash flow that, over time, could have a material adverse impact our ability to fund our operations and capital requirements.

 

Recently, the financial markets experienced a period of unprecedented turmoil, including the bankruptcy, restructuring or sale of certain financial institutions and the intervention of the U.S. federal government. While the ultimate outcome of these events cannot be predicted, they may have a material adverse effect on our liquidity and financial condition if our ability to borrow money from our existing lenders under our senior credit agreement to finance our operations were to be impaired. The crisis in the financial markets may also have a material adverse impact on the availability and cost of credit in the future. Our ability to pay our debt or refinance our obligations under our new senior credit agreement will depend on our future performance, which will be affected by, among other things, prevailing economic conditions. In addition, tightening of credit markets may have an adverse impact on our customers’ ability to finance the purchase of new commercial vehicles or our suppliers’ ability to provide us with raw materials, either of which could adversely affect our business and results of operations.

 

 

Our profitability depends in part on the varying conditions in the commercial vehicle market. This market is subject to considerable volatility as it moves in response to cycles in the overall business environment and is particularly sensitive to the industrial sector, which generates a significant portion of the freight tonnage hauled. Sales of commercial vehicles have historically been cyclical, with demand affected by such economic factors as industrial production, construction levels, demand for consumer durable goods, interest rates and fuel costs. For example, North American commercial vehicle sales and production experienced a downturn from 2000 to 2003 due to a confluence of events that included a weak economy, an oversupply of new and used vehicle inventory and lower spending on commercial vehicles and equipment. In addition, North American commercial vehicle sales and production experienced a downturn during 2007 and 2008 as a result of pre-orders in 2006 in anticipation of the new EPA emission standards becoming effective in 2007 and general weakness in the North American economy and corresponding decline in the need for commercial vehicles to haul freight tonnage in North America, among other factors. These downturns had a material adverse effect on our business during the same periods. We cannot provide any assurance as to the length or ultimate level of the recovery of the current decline. We also cannot predict that the industry will follow past cyclical patterns that might include a strong 2009 pre-order in advance of new emissions standards set to take place in 2010. If unit production of class 8 heavy trucks declines further in 2009, it will continue to adversely affect our business and results of operations.

 

 

We incur costs and make capital expenditures based upon estimates of production volumes for our customers’ vehicles. While we attempt to establish a price for our components and systems that will compensate for variances in production volumes, if the actual production of these vehicles is significantly less than anticipated, our gross margin on these products would be adversely affected. We enter into agreements with our customers at the beginning of a given platform’s life to supply products for that platform. Once we enter into such agreements, fulfillment of our purchasing requirements is our obligation for the entire production life of the platform, with terms ranging from five to seven years, and we have no provisions to terminate such contracts. We may become committed to supply products to our customers at selling prices that are not sufficient to cover the direct cost to produce such products. We cannot predict our customers’ demands for our products either in the aggregate or for particular reporting periods. If customers representing a significant amount of our revenues were to purchase materially lower volumes than expected, it would have a material adverse effect on our business, financial condition and results of operations.

 

 

The commercial vehicle component supply industry has traditionally been highly fragmented and serves a limited number of large OEMs. As a result, OEMs have historically had a significant amount of leverage over their outside suppliers. Our contracts with major OEM customers generally provide for an annual productivity cost reduction. Historically, cost reductions through product design changes, increased productivity and similar programs with our suppliers have generally offset these customer-imposed productivity cost reduction

requirements. However, if we are unable to generate sufficient production cost savings in the future to offset price reductions, our gross margin and profitability would be adversely affected. In addition, changes in OEMs’ purchasing policies or payment practices could have an adverse effect on our business.

 

 

Our ability to achieve our business and financial objectives is subject to a variety of factors, many of which are beyond our control. For example, we may not be successful in implementing our strategy if unforeseen factors emerge that diminish the expected growth in the commercial vehicle markets we supply, or we experience increased pressure on our margins. In addition, we may not succeed in integrating strategic acquisitions and our pursuit of additional strategic acquisitions may lead to resource constraints which could have a negative impact on our ability to meet customers’ demands, thereby adversely affecting our relationships with those customers. As a result of such business or competitive factors, we may decide to alter or discontinue aspects of our business strategy and may adopt alternative or additional strategies. Any failure to successfully implement our business strategy could adversely affect our business, results of operations and growth potential.

 

Developing product innovations has been and will continue to be a significant part of our business strategy. We believe that it is important that we continue to meet our customers’ demands for product innovation, improvement and enhancement, including the continued development of new-generation products, design improvements and innovations that improve the quality and efficiency of our products. However, such development will require us to continue to invest in research and development and sales and marketing. In the future, we may not have sufficient resources to make such necessary investments, or we may be unable to make the technological advances necessary to carry out product innovations sufficient to meet our customers’ demands. We are also subject to the risks generally associated with product development, including lack of market acceptance, delays in product development and failure of products to operate properly. We may, as a result of these factors, be unable to meaningfully focus on product innovation as a strategy and may therefore be unable to meet our customers’ demands for product innovation.

 

 

Numerous raw materials are used in the manufacture of our products. Steel, aluminum, petroleum-based products, copper, resin, foam, fabrics, wire and wire components account for the most significant portion of our raw material costs. Although we currently maintain alternative sources for raw materials, our business is subject to the risk of price increases and periodic delays in delivery. For example, we are currently being assessed surcharges as well as price increases on certain purchases of steel, copper and other raw materials. If we are unable to purchase certain raw materials required for our operations for a significant period of time, our operations would be disrupted, and our results of operations would be adversely affected. In addition, if we are unable to pass on the increased costs of raw materials to our customers, this could adversely affect our results of operations and financial condition.

 

 

We may pursue additional acquisition targets that will allow us to continue to expand into new geographic markets, add new customers, provide new product, manufacturing and service capabilities and increase penetration with existing customers. However, we expect to face competition for acquisition candidates, which may limit the number of our acquisition opportunities and may lead to higher acquisition prices. Moreover, acquisitions of businesses may require additional debt financing, resulting in additional leverage. The covenants in the agreement governing our new revolving credit facility may further limit our ability to complete acquisitions. There can be no assurance that we will find attractive acquisition candidates or successfully integrate acquired businesses into our existing business. If we fail to complete additional acquisitions, we may have difficulty competing with more thoroughly integrated competitors and our results of operations could be adversely affected. To the extent that we do complete additional acquisitions, if the expected synergies from such acquisitions do not materialize or we fail to successfully integrate such new businesses into our existing businesses, our results of operations could also be adversely affected.

 

The hourly workforces at our Norwalk and Shadyside, Ohio facilities and Mexico operations are unionized. The unionized employees at these facilities represented approximately 48% of our employees in our North American operations as of December 31, 2008. We have experienced limited unionization efforts at certain of our other North American facilities from time to time. In addition, 58% of our employees at our Europe and Asia operations are represented by a shop steward committee, which may seek to limit our flexibility in our relationship with these employees. We cannot assure you that we will not encounter future unionization efforts or other types of conflicts with labor unions or our employees.

 

Many of our OEM customers and their suppliers also have unionized work forces. Work stoppages or slow-downs experienced by OEMs or their other suppliers could result in slow-downs or closures of assembly plants where our products are included in assembled commercial vehicles. In the event that one or more of our customers or their suppliers experience a material work stoppage, such work stoppage could have a material adverse effect on our business.

 

 

We are subject to foreign, federal, state, and local laws and regulations governing the protection of the environment and occupational health and safety, including laws regulating air emissions, wastewater discharges, the generation, storage, handling, use and transportation of hazardous materials; the emission and discharge of hazardous materials into the soil, ground or air; and the health and safety of our colleagues. We are also required to obtain permits from governmental authorities for certain of our operations. We cannot assure you that we are, or have been, in complete compliance with such environment and safety laws, regulations and permits. If we violate or fail to comply with these laws, regulations or permits, we could be fined or otherwise sanctioned by regulators. In some instances, such a fine or sanction could have a material and adverse effect on us. The environmental laws to which we are subject have become more stringent over time, and we could incur material expenses in the future to comply with environmental laws. We are also subject to laws imposing liability for the cleanup of contaminated property. Under these laws, we could be held liable for costs and damages relating to contamination at our past or present facilities and at third party sites to which we sent waste containing hazardous substances. The amount of such liability could be material.

 

Several of our facilities are either certified as, or are in the process of being certified as ISO 9001, 14000, 14001 or TS16949 (the international environmental management standard) compliant or are developing similar environmental management systems. Although we have made, and will continue to make, capital expenditures to implement such environmental programs and comply with environmental requirements, we do not expect to make material capital expenditures for environmental controls in 2009 or 2010. The environmental laws to which we are subject have become more stringent over time, and we could incur material costs or expenses in the future to comply with environmental laws.

 

Certain of our operations generate hazardous substances and wastes. If a release of such substances or wastes occurs at or from our properties, or at or from any offsite disposal location to which substances or wastes from our current or former operations were taken, or if contamination is discovered at any of our current or former properties, we may be held liable for the costs of cleanup and for any other response by governmental authorities or private parties, together with any associated fines, penalties or damages. In most jurisdictions, this liability would arise whether or not we had complied with environmental laws governing the handling of hazardous substances or wastes.

 

 

Although the products we manufacture and supply to commercial vehicle OEMs are not subject to significant government regulation, our business is indirectly impacted by the extensive governmental regulation applicable to commercial vehicle OEMs. These regulations primarily relate to emissions and noise standards imposed by the Environmental Protection Agency (“EPA”), state regulatory agencies, such as the California Air Resources Board (“CARB”), and other regulatory agencies around the world. Commercial vehicle OEMs are also subject to the

National Traffic and Motor Vehicle Safety Act and Federal Motor Vehicle Safety Standards promulgated by the National Highway Traffic Safety Administration. Changes in emission standards and other proposed governmental regulations could impact the demand for commercial vehicles and, as a result, indirectly impact our operations. For example, new emission standards governing Heavy-duty (Class 8) diesel engines that went into effect in the United States on October 1, 2002 and January 1, 2007 resulted in significant purchases of new trucks by fleet operators prior to such date and reduced short term demand for such trucks in periods immediately following such date. New emission standards for truck engines used in Class 5 to 8 trucks imposed by the EPA and CARB are scheduled to become effective in 2010. To the extent that current or future governmental regulation has a negative impact on the demand for commercial vehicles, our business, financial condition or results of operations could be adversely affected.

 

 

Sales to International, PACCAR, Caterpillar, Daimler Trucks and Volvo/Mack accounted for approximately 15%, 12%, 11%, 11% and 10%, respectively, of our revenue in 2008, and our ten largest customers accounted for approximately 72% of our revenue in 2008. The loss of any of our largest customers or the loss of significant business from any of these customers could have a material adverse effect on our business, financial condition and results of operations. Even though we may be selected as the supplier of a product by an OEM for a particular vehicle, our OEM customers issue blanket purchase orders which generally provide for the supply of that customer’s annual requirements for that vehicle, rather than for a specific number of our products. If the OEM’s requirements are less than estimated, the number of products we sell to that OEM will be accordingly reduced. In addition, the OEM may terminate its purchase orders with us at any time.

 

 

We have operations in Europe, China, Australia and Mexico, which accounted for approximately 26% of our revenues in 2008. As a result, we generate a significant portion of our sales and incur a significant portion of our expenses in currencies other than the U.S. dollar. To the extent that we are unable to match revenues received in foreign currencies with costs paid in the same currency, exchange rate fluctuations in any such currency could have an adverse effect on our financial results.

 

 

We have operations in Europe, China, Australia and Mexico, which accounted for approximately 26%, 23% and 13% of our total revenues for the years ended December 31, 2008, 2007 and 2006, respectively. There are certain risks inherent in our international business activities including, but not limited to:

 

 

As we continue to expand our business globally, our success will be dependent, in part, on our ability to anticipate and effectively manage these and other risks associated with foreign operations. We cannot assure you

that these and other factors will not have a material adverse effect on our international operations or our business, financial condition or results of operations as a whole.

 

 

The commercial vehicle component supply industry is highly competitive. Our products primarily compete on the basis of price, breadth of product offerings, product quality, technical expertise and development capability, product delivery and product service. Increased competition may lead to price reductions resulting in reduced gross margins and loss of market share.

 

Current and future competitors may make strategic acquisitions or establish cooperative relationships among themselves or with others, foresee the course of market development more accurately than we do, develop products that are superior to our products, produce similar products at lower cost than we can or adapt more quickly to new technologies, industry or customer requirements. By doing so, they may enhance their ability to meet the needs of our customers or potential future customers. These developments could limit our ability to obtain revenues from new customers and to maintain existing revenues from our customer base. We may not be able to compete successfully against current and future competitors and the failure to do so may have a material adverse effect on our business, operating results and financial condition.

 

 

Changes in competitive technologies may render certain of our products less attractive. Our ability to anticipate changes in technology and to successfully develop and introduce new and enhanced products on a timely basis will be a significant factor in our ability to remain competitive. There can be no assurance that we will be able to achieve the technological advances that may be necessary for us to remain competitive. We are also subject to the risks generally associated with new product introductions and applications, including lack of market acceptance, delays in product development and failure to operate properly.

 

 

Our future success depends on our continuing ability to attract, train, integrate and retain highly skilled personnel. Competition for these employees is intense. We may not be able to retain our current key employees or attract, train, integrate or retain other highly skilled personnel in the future. Our future success also depends in large part on the continued service of key management personnel, particularly our key executive officers. If we lose the services of one or more of these individuals or other key personnel, or if we are unable to attract, train, integrate and retain the highly skilled personnel we need, our business, operating results and financial condition could be materially adversely affected.

 

 

Our success depends to a certain degree on our ability to protect our intellectual property and to operate without infringing on the proprietary rights of third parties. While we have been issued patents and have registered trademarks with respect to many of our products, our competitors could independently develop similar or superior products or technologies, duplicate our designs, trademarks, processes or other intellectual property or design around any processes or designs on which we have or may obtain patents or trademark protection. In addition, it is possible that third parties may have or acquire licenses for other technology or designs that we may use or desire to use, so that we may need to acquire licenses to, or to contest the validity of, such patents or trademarks of third parties. Such licenses may not be made available to us on acceptable terms, if at all, and we may not prevail in contesting the validity of third party rights.

 

In addition to patent and trademark protection, we also protect trade secrets, know-how and other confidential information against unauthorized use by others or disclosure by persons who have access to them, such as our employees, through contractual arrangements. These arrangements may not provide meaningful protection for our

trade secrets, know-how or other proprietary information in the event of any unauthorized use, misappropriation or disclosure of such trade secrets, know-how or other proprietary information. If we are unable to maintain the proprietary nature of our technologies, our revenues could be materially adversely affected.

 

 

As the number of products in our target markets increases and the functionality of these products further overlaps, we may become increasingly subject to claims by a third party that our technology infringes such party’s proprietary rights. Regardless of their merit, any such claims could be time consuming and expensive to defend, may divert management’s attention and resources, could cause product shipment delays and could require us to enter into costly royalty or licensing agreements. If successful, a claim of infringement against us and our inability to license the infringed or similar technology and/or product could have a material adverse effect on our business, operating results and financial condition.

 

 

Our common stock is listed on The NASDAQ Global Select Market. In order to maintain that listing, we are required to satisfy various minimum financial and market related requirements, including, among others, maintaining a $1.00 per share minimum closing bid price for our common stock. In response to current market conditions, NASDAQ has temporarily suspended the enforcement rules requiring the minimum $1.00 closing bid price through April 19, 2009. Our common stock is currently trading below $1.00 per share. If the closing bid price of our common stock continues to fail to meet NASDAQ’s minimum closing bid price requirement for at least 30 consecutive trading days after April 19, 2009, or such later date to which NASDAQ may extend its suspension of this requirement, NASDAQ may make a determination to delist our common stock. Any delisting could adversely affect our ability to sell our common stock, and the market price of our common stock could decrease. A delisting could also adversely affect our ability to obtain financing for the continuation of our operations and/or result in the loss of confidence by investors, customers and employees.

 

 

Our stock price has fluctuated since our initial public offering in August 2004. The trading price of our common stock is subject to significant fluctuations in response to variations in quarterly operating results, including foreign currency exchange fluctuations, the gain or loss of significant orders, changes in earnings estimates by analysts, announcements of technological innovations or new products by us or our competitors, general conditions in the commercial vehicle industry and other events or factors. In addition, the equity markets in general have recently experienced significant disruptions which have caused substantial volatility in the market price for many companies in industries similar or related to that of ours and which have been unrelated to the operating performance of these companies. The market price for shares of our common stock has declined substantially in recent months and could decline further if our future results of operations fail to meet or exceed the expectations of market analysis and investors or current economic or market conditions persist or worsen.

 

 

For a number of reasons, including but not limited to, those described below, our operating results, revenues and expenses have in the past varied and may in the future vary significantly from quarter-to-quarter or year-to-year. These fluctuations could have an adverse effect on the market price of our common stock.

 

Fluctuations in Quarterly or Annual Operating Results.  Our operating results may fluctuate as a result of:

 

 

 

Limited Ability to Adjust Expenses.  We base our operating expense budgets primarily on expected revenue trends. Certain of our expenses are relatively fixed and as such we may be unable to adjust expenses quickly enough to offset any unexpected revenue shortfall. Accordingly, any shortfall in revenue may cause significant variation in operating results in any quarter or year.

 

Based on the above factors, we believe that quarter-to-quarter or year-to-year comparisons of our operating results may not be a good indication of our future performance. It is possible that in one or more future quarters or years, our operating results may be below the expectations of public market analysts and investors. In that event, the trading price of our common stock may be adversely affected.

 

 

As a supplier of products and systems to commercial vehicle OEMs, we face an inherent business risk of exposure to product liability claims in the event that our products, or the equipment into which our products are incorporated, malfunction and result in personal injury or death. Product liability claims could result in significant losses as a result of expenses incurred in defending claims or the award of damages.

 

In addition, we may be required to participate in recalls involving systems or components sold by us if any prove to be defective, or we may voluntarily initiate a recall or make payments related to such claims as a result of various industry or business practices or the need to maintain good customer relationships. Such a recall would result in a diversion of management resources. While we do maintain product liability insurance, we cannot assure you that it will be sufficient to cover all product liability claims, that such claims will not exceed our insurance coverage limits or that such insurance will continue to be available on commercially reasonable terms, if at all. Any product liability claim brought against us could have a material adverse effect on our results of operations.

 

Moreover, we warrant the workmanship and materials of many of our products under limited warranties and have entered into warranty agreements with certain OEMs that warranty certain of our products in the hands of these OEMs’ customers, in some cases for as long as six years. Accordingly, we are subject to risk of warranty claims in the event that our products do not conform to our customers’ specifications or, in some cases in the event that our products do not conform with their customers’ expectations. It is possible for warranty claims to result in costly product recalls, significant repair costs and damage to our reputation, all of which would adversely affect our results of operations.

 

 

We manufacture or assemble our products at facilities in North America, Europe, China and Australia. An interruption in production or service capabilities at any of these facilities as a result of equipment failure or other reasons could result in our inability to produce our products, which could reduce our net revenues and earnings for the affected period. In the event of a stoppage in production at any of our facilities, even if only temporary, or if we experience delays as a result of events that are beyond our control, delivery times to our customers could be severely affected. Any significant delay in deliveries to our customers could lead to increased returns or cancellations and cause us to lose future revenues. Our facilities are also subject to the risk of catastrophic loss due to unanticipated

events such as fires, explosions or violent weather conditions. We may experience plant shutdowns or periods of reduced production as a result of equipment failure, delays in deliveries or catastrophic loss, which could have a material adverse effect on our business, results of operations or financial condition.

 

 

We entered into a loan and security agreement on January 7, 2009 (the “Loan and Security Agreement”) providing for a new revolving credit facility that replaced our prior revolving credit facility. Under the Loan and Security Agreement, we are required to comply with a minimum operating performance covenant, as described in more detail under “Management’s Discussion and Analysis — Liquidity and Capital Resources — Debt and Credit Facilities — Loan and Security Agreement.” On March 12, 2009, we entered into a first amendment to the Loan and Security Agreement to provide us with relief under this covenant in 2009 and to make certain other changes, including an increase in the applicable margin for borrowings, capital expenditure limitations for 2009 and a temporary decrease in domestic availability. We continue to operate in a challenging economic environment, and our ability to comply with the new covenants in the Loan and Security Agreement may be affected in the future by economic or business conditions beyond our control. If we are not in compliance with these covenants and we are unable to obtain necessary waivers or amendments from the lender, we would be precluded from borrowing under the Loan and Security Agreement. If we are unable to borrow under the Loan and Security Agreement, we will need to meet our capital requirements using other sources. Due to current economic conditions, alternative sources of liquidity may not be available on acceptable terms, if at all. In addition, if we do not comply with the financial or other covenants in the Loan and Security Agreement, the lender could declare an event of default under the Loan and Security Agreement, and our indebtedness thereunder could be declared immediately due and payable, which would also result in an event of default under the 8% senior notes due 2013. Any of these events would have a material adverse effect on our business, financial condition and liquidity.

 

In addition, the Loan and Security Agreement and the indenture governing the 8.0% senior notes due 2013 contain covenants that, among other things, restricts our ability to:

 

 

These covenants could affect our ability to operate our business and may limit our ability to take advantage of potential business opportunities as they arise.

 

 

The aggregate amount of our outstanding indebtedness was $164.9 million as of December 31, 2008. Our level of indebtedness increases the possibility that we may be unable to generate cash sufficient to pay, when due, the principal of, interest on or other amounts due in respect of our indebtedness, including the notes. Our indebtedness,

combined with our lease and other financial obligations and contractual commitments could have other important consequences to you as a shareholder. For example, it could:

 

 

Any of the above listed factors could materially adversely affect our business, financial condition and results of operations.

 

 

As part of our business strategy, we continuously seek ways to lower costs, improve manufacturing efficiencies and increase productivity and intend to apply this strategy to those operations acquired through acquisitions. We may be unsuccessful in achieving these objectives which could adversely affect our operating results and financial condition. In addition, we may incur restructuring charges in the future and such charges could adversely affect our operating results and financial condition. In February 2009, we announced a restructuring plan that includes a 15% reduction in salaried workforce and the closure of five of our smaller manufacturing warehousing and assembly facilities. We estimate we will record charges incurred in connection with the restructuring of approximately $2.5 million, consisting of approximately $1.5 million of severance costs and $1.0 million of facility closure costs. We estimate that all of the restructuring charges will be incurred as future cash expenditures, of which approximately $2.2 million is expected to be incurred in 2009 and approximately $0.3 million is expected to be incurred in 2010. We expect to substantially complete the restructuring by April 2009, but we may not be successful in reducing our costs within the expected time frame or at all.

 

 

We are required to perform impairment tests annually or at any time when events occur that could affect the value of our assets. Significant and unanticipated changes in circumstances, such as the general economic environment, changes or downturns in our industry as a whole, termination of any of our customer contracts, restructuring efforts and general workforce reductions, may result in a charge for impairment that can materially and adversely affect our reported net income and our stockholders’ equity. During the fourth quarter of 2008, we determined that the significant declines in economic and industry conditions and the decline in our stock price were impairment indicators. As a result, we recorded impairments of approximately $144.7 million of goodwill and approximately $62.8 million of intangible assets relating to our customer relationships. At December 31, 2008, we had other intangible assets of approximately $34.6 million.

We perform our annual indefinite-lived intangible asset impairment analysis in the second quarter of our fiscal year. If macroeconomic conditions deteriorate further in 2009, we may be required to record additional impairment charges in the future. We are also required under accounting principles generally accepted in the United States to review our amortizable intangible assets for impairment whenever events and circumstances indicate that the carrying value of such assets may not be recoverable. We may be required to record a significant charge to earnings in a period in which any impairment of our intangible assets is determined.

 

 

None.

 

 

Our corporate office is located in New Albany, Ohio. Several of our manufacturing facilities are located near our OEM customers to reduce our distribution costs, reduce risk of interruptions in our delivery schedule, further improve customer service and provide our customers with reliable delivery of products and services. The following table provides selected information regarding our principal facilities:

 

 

We also have leased sales and service offices located in the United States, Australia and France.

 

Utilization of our facilities varies with North American, European and Asian commercial vehicle production and general economic conditions in such regions. All locations are principally used for manufacturing or assembly, except for our Wixom, Michigan, Aurora, Illinois and New Albany, Ohio facilities which are administrative offices and our leased warehouse facilities in Douglas, Arizona, Tellico Plains, Tennessee and Bellaire, Ohio.

 

In February 2009, we announced the closure of the following facilities: our assembly and sequencing facility in Kent, Washington; seat sequencing and assembly facility in Statesville, North Carolina; manufacturing facility in Lake Oswego, Oregon; inventory and product warehouse in Concord, North Carolina; and seat assembly and distribution facility in Seneffs, Belgium. We expect to substantially complete these closures by April 2009.

 

 

We are subject to various legal proceedings and claims arising in the ordinary course of business, including, but not limited to, customer and supplier disputes and product liability claims arising out of the conduct of our businesses and examinations by the Internal Revenue Service (“IRS”). The IRS routinely examines our federal income tax returns and, in the course of those examinations, the IRS may propose adjustments to our federal income tax liability reported on such returns. It is our practice to defend those proposed adjustments that we deem lacking merit. We are not involved in any litigation at this time in which we expect that an unfavorable outcome of the proceedings, including any proposed adjustments presented to date by the IRS, individually or collectively, will have a material adverse effect on our financial position, results of operations or cash flows.

 

 

There were no matters submitted to a vote of stockholders during the fourth quarter of 2008.

 

 

Our common stock is traded on the NASDAQ Global Select Market under the symbol “CVGI.” The following table sets forth the high and low sale prices for our common stock, for the periods indicated as regularly reported by the NASDAQ Global Select Market:

 

 

As of February 27, 2009, there were 127 holders of record of our outstanding common stock.

 

We have not declared or paid any dividends to the holders of our common stock in the past and do not anticipate paying dividends in the foreseeable future. Any future payment of dividends is within the discretion of the Board of Directors and will depend upon, among other factors, the capital requirements, operating results and financial condition of CVG. In addition, our ability to pay cash dividends is limited under the terms of the credit agreement governing our new revolving credit facility.

The following graph compares the cumulative 52-month total return to holders of Commercial Vehicle Group, Inc.’s common stock to the cumulative total returns of the NASDAQ Composite Index and a customized peer group of five companies that includes: Accuride Corporation, ArvinMeritor, Inc, Cummins, Inc., Eaton Corp. and Stoneridge, Inc. The graph assumes that the value of the investment in the Company’s common stock, in the peer group and the index (including reinvestment of dividends) was $100 on August 5, 2004 and tracks it through December 31, 2008.

 

COMPARISON OF 52 MONTH CUMULATIVE TOTAL RETURN*

Among Commercial Vehicle Group, Inc., The NASDAQ Composite Index

and Commercial Vehicle Supplier Composite Index

 

 

 

 

The information in the graph and table above is not “soliciting material,” is not deemed “filed” with the Securities and Exchange Commission and is not to be incorporated by reference in any of our filings under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended, whether made before or after the date of this annual report, except to the extent that we specifically incorporate such information by reference.

The following table sets forth information in connection with purchases made by, or on behalf of, us or any affiliated purchaser, of shares of our common stock during the quarterly period ended December 31, 2008:

 

 

We did not repurchase any of our common stock on the open market as part of a stock repurchase program during the fourth quarter of 2008, however, our employees surrendered 18,321 shares of our common stock to satisfy the tax withholding obligations on the vesting of restricted stock awards issued under our Second Amended and Restated Equity Incentive Plan.

 

The following selected financial data has been revised to reflect the restatement discussed in Note 8 to the financial statements included in Item 8 in this Annual Report on Form 10-K/A.

 

The following table sets forth selected consolidated financial data regarding our business and certain industry information and should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and our consolidated financial statements and notes thereto included elsewhere in this Annual Report on Form 10-K/A.

 

Material Events Affecting Financial Statement Comparability:

 

Collectively, our acquisitions of Mayflower, Monona and Cabarrus in 2005 and our acquisition of C.I.E.B. in 2006 and our acquisition of PEKM, Gage and Short Bark in 2007 materially impacted our results of operations and as a result, our consolidated financial statements for the years ended December 31, 2008, 2007 and 2006 are not comparable to the results of the prior periods presented without consideration of the information provided in Note 3 to our consolidated financial statements contained in Item 8 of our Annual Report on Form 10-K for the year ended December 31, 2005, Note 3 to our consolidated financial statements contained in Items 8 of our Annual report on Form 10-K for the year ended December 31, 2006 and Note 3 to our consolidated financial statements contained in Item 8 of our Annual Report on Form 10-K for the year ended December 31, 2007.

 

 

 

 

Our management uses Adjusted EBITDA, in addition to the supplemental information, as an integral part of its report and planning processes and as one of the primary measures to, among other things:

 

(i) monitor and evaluate the performance of our business operations;

 

 

 

 

 

Our management believes that Adjusted EBITDA, in addition to the supplemental information, is useful to investors as it provides them with disclosures of our operating results on the same basis as that used by our management. Additionally, our management believes that Adjusted EBITDA, in addition to the supplemental information, provides useful information to investors about the performance of our overall business because the measure eliminates the effects of certain unusual charges or gains that are not directly attributable to our underlying operating performance. Accordingly, we believe that the presentation of Adjusted EBITDA, when used in conjunction with the supplemental information and GAAP financial measures, is a useful financial analysis tool, used by our management as described above, that can assist investors in assessing our financial condition, operating performance and underlying strength. Adjusted EBITDA should not be considered in isolation or as a substitute for net income prepared in conformity with GAAP. Other companies may define Adjusted EBITDA differently. Adjusted EBITDA, as well as the other information in this filing, should be read in conjunction with our financial statements and footnotes contained in the documents that we file with the U.S. Securities and Exchange Commission.

 

The following is a reconciliation of Net Income to Adjusted EBITDA:

 

 

 

 

You should read the following discussion and analysis in conjunction with the information set forth under “Item 6 — Selected Financial Data” and our consolidated financial statements and the notes thereto included in Item 8 in this Annual Report on Form 10-K/A. The statements in this discussion regarding industry outlook, our expectations regarding our future performance, liquidity and capital resources and other non-historical statements in this discussion are forward-looking statements. See “Forward-Looking Information” on page ii of this Annual Report on Form 10-K/A. These forward-looking statements are subject to numerous risks and uncertainties, including, but not limited to, the risks and uncertainties described under “Item 1A — Risk Factors.” Our actual results may differ materially from those contained in or implied by any forward-looking statements.

 

The table set forth under “Contractual Obligations and Commercial Commitments” has been revised to reflect the restatement discussed in Note 8 to the financial statements included in Item 8 in this Annual Report on Form 10-K/A.

 

Company Overview

 

We are a leading supplier of fully integrated system solutions for the global commercial vehicle market, including the Heavy-duty (Class 8) truck market, the construction, military, bus and agriculture market and the specialty transportation markets. As a result of our strong leadership in cab-related products and systems, we are positioned to benefit from the increased focus of our customers on cab design and comfort and convenience features to better serve their end-user, the driver. Our products include suspension seat systems, electronic wire harness assemblies, control and switches, cab structures and components, interior trim systems (including instrument panels, door panels, headliners, cabinetry and floor systems), mirrors and wiper systems specifically designed for applications in commercial vehicles.

 

We are differentiated from suppliers to the automotive industry by our ability to manufacture low volume customized products on a sequenced basis to meet the requirements of our customers. We believe that we have the number one or two position in most of our major markets and that we are the only supplier in the North American commercial vehicle market that can offer complete cab systems including cab body assemblies, sleeper boxes, seats, interior trim, flooring, wire harnesses, panel assemblies and other structural components. We believe our products are used by virtually every major North American heavy truck commercial vehicle OEM, which we believe creates an opportunity to cross-sell our products and offer a fully integrated system solution.

 

Demand for our heavy truck products is generally dependent on the number of new heavy truck commercial vehicles manufactured in North America, which in turn is a function of general economic conditions, interest rates, changes in governmental regulations, consumer spending, fuel costs and our customers’ inventory levels and production rates. New heavy truck commercial vehicle demand has historically been cyclical and is particularly sensitive to the industrial sector of the economy, which generates a significant portion of the freight tonnage hauled by commercial vehicles. Production of heavy truck commercial vehicles in North America initially peaked in 1999 and experienced a downturn from 2000 to 2003 that was due to a weak economy, an oversupply of new and used vehicle inventory and lower spending on heavy truck commercial vehicles and equipment. Demand for commercial vehicles improved in 2006 due to broad economic recovery in North America, corresponding growth in the movement of goods, the growing need to replace aging truck fleets and OEMs received larger than expected pre-orders in anticipation of the new EPA emissions standards becoming effective in 2007. During 2007, the demand for North American Class 8 heavy trucks experienced a downturn as a result of pre-orders in 2006 and general weakness in the North American economy and corresponding decline in the need for commercial vehicles to haul freight tonnage in North America. The demand for new heavy truck commercial vehicles in 2008 remained close to 2007 levels as weakness in the overall North American economy continue to impact production related orders. We believe this general weakness has contributed to the reluctance of trucking companies to invest in new truck fleets. In addition, the recent tightening of credit in financial markets may adversely affect the ability of our customers to obtain financing for significant truck orders. If there is a sustained downturn in the economy or the disruption in the financial markets continues, we expect that low demand for Class 8 trucks could continue to have a negative impact on our revenues, operating results and financial position.

 

In 2008, approximately 40% of our revenue was generated from sales to North American heavy-duty truck OEMs. Our remaining revenue in 2008 was primarily derived from sales to OEMs in the global construction market, European truck market, aftermarket, OEM service organizations and other commercial vehicle and specialty markets. Demand for our products is also driven to a significant degree by preferences of the end-user of the

commercial vehicle, particularly with respect to Heavy-duty (Class 8) trucks. Unlike the automotive industry, commercial vehicle OEMs generally afford the ultimate end-user the ability to specify many of the component parts that will be used to manufacture the commercial vehicle, including a wide variety of cab interior styles and colors, the brand and type of seats, type of seat fabric and color and specific mirror styling. In addition, certain of our products are only utilized in Heavy-duty (Class 8) trucks, such as our storage systems, sleeper boxes, sleeper bunks and privacy curtains, and, as a result, changes in demand for Heavy-duty (Class 8) trucks or the mix of options on a vehicle can have a greater impact on our business than changes in the overall demand for commercial vehicles. To the extent that demand for higher content vehicles increases or decreases, our revenues and gross profit will be impacted positively or negatively.

 

Demand for our construction products is also dependent on the overall vehicle demand for new commercial vehicles in the global construction equipment market and generally follows certain economic conditions around the world. Within the construction market, there are two classes of construction equipment, the medium/heavy equipment market (weighing over 12 metric tons) and the light construction equipment market (weighing below 12 metric tons). Demand in the medium/heavy construction equipment market is typically related to the level of larger scale infrastructure development projects such as highways, dams, harbors, hospitals, airports and industrial development as well as activity in the mining, forestry and other raw material based industries. Demand in the light construction equipment market is typically related to certain economic conditions such as the level of housing construction and other smaller-scale developments and projects. Our products are primarily used in the medium/heavy construction equipment markets. If there is a sustained downturn in the global economy or the disruption in the financial markets continues, we expect that low demand for construction equipment could have a negative impact on our revenues, operating results and financial position.

 

Along with the United States, we have operations in Europe, China, Australia and Mexico. Our operating results are, therefore, impacted by exchange rate fluctuations to the extent we translate our foreign operations from their local currencies into U.S. dollars. Weakening of these foreign currencies as compared to the U.S. dollar resulted in an approximate $6.9 million decrease in our revenues in 2008 as compared to 2007 and strengthening of these foreign currencies as compared to the U.S. dollar resulted in an approximate $11.0 million increase in 2007 as compared to 2006. Because our costs were generally impacted to the same degree as our revenue, this exchange rate fluctuation did not have a material impact on our net income in 2008 as compared to 2007 and in 2007 as compared to 2006.

 

We continuously seek ways to improve our operating performance by lowering costs. These efforts include, but are not limited to, the following:

 

 

In February 2009, we announced a restructuring plan that includes a 15% reduction in salaried workforce and the closure of five of our smaller manufacturing warehousing and assembly facilities. The facilities to be closed include our assembly and sequencing facility in Kent, Washington; seat sequencing and assembly facility in Statesville, North Carolina; manufacturing facility in Lake Oswego, Oregon; inventory and product warehouse in Concord, North Carolina; and seat assembly and distribution facility in Seneffs, Belgium. The restructuring is being implemented to control our operating costs in light of the current condition of the global economy, and in particular the commercial vehicle markets. We expect to substantially complete the restructuring by April 2009.

 

Although OEM demand for our products is directly correlated with new vehicle production, we also have the opportunity to grow through increasing our product content per vehicle through cross selling and bundling of products. We generally compete for new business at the beginning of the development of a new vehicle platform and upon the redesign of existing programs. New platform development generally begins at least one to three years

before the marketing of such models by our customers. Contract durations for commercial vehicle products generally extend for the entire life of the platform, which is typically five to seven years.

 

In sourcing products for a specific platform, the customer generally develops a proposed production timetable, including current volume and option mix estimates based on their own assumptions, and then sources business with the supplier pursuant to written contracts, purchase orders or other firm commitments in terms of price, quality, technology and delivery. In general, these contracts, purchase orders and commitments provide that the customer can terminate if a supplier does not meet specified quality and delivery requirements and, in many cases, they provide that the price will decrease over the proposed production timetable. Awarded business generally covers the supply of all or a portion of a customer’s production and service requirements for a particular product program rather than the supply of a specific quantity of products. Accordingly, in estimating awarded business over the life of a contract or other commitment, a supplier must make various assumptions as to the estimated number of vehicles expected to be produced, the timing of that production, mix of options on the vehicles produced and pricing of the products being supplied. The actual production volumes and option mix of vehicles produced by customers depend on a number of factors that are beyond a supplier’s control.

 

Critical Accounting Policies and Estimates

 

Our consolidated financial statements are prepared in conformity with accounting principles generally accepted in the United States of America (“U.S. GAAP”). For a comprehensive discussion of our accounting policies, see Note 2 to our consolidated financial statements in Item 8 in this Annual Report on Form 10-K/A.

 

The preparation of our consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. These estimates and assumptions, particularly relating to revenue recognition and sales commitments, provision for income taxes, restructuring and impairment charges and litigation and contingencies may have a material impact on our financial statements, and are discussed in detail throughout our analysis of our results of operations.

 

In addition to evaluating estimates relating to the items discussed above, we also consider other estimates, including, but not limited to, those related to allowance for doubtful accounts, defined benefit pension plan assumptions, uncertain tax positions and goodwill and other intangible assets. We base our estimates on historical experience and various other assumptions that we believe are reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets, liabilities and equity that are not readily apparent from other sources. Actual results and outcomes could differ materially from these estimates and assumptions. See Item 1A — Risk Factors for additional information regarding risk factors that may impact our estimates.

 

We apply the following critical accounting policies in the preparation of our consolidated financial statements.

 

Revenue Recognition and Sales Commitments — We recognize revenue in accordance with the SEC’s Staff Accounting Bulletin (“SAB”) No. 101, Revenue Recognition in Financial Statements, and SAB No. 104, Revenue Recognition, and other authoritative accounting literature. These pronouncements generally require that we recognize revenue when (1) delivery has occurred or services have been rendered, (2) persuasive evidence of an arrangement exists, (3) there is a fixed or determinable price and (4) collectability is reasonably assured. Our products are generally shipped from our facilities to our customers, which is when legal title passes to the customer for substantially all of our revenues. We enter into agreements with our customers at the beginning of a given platform’s life to supply products for that platform. Once we enter into such agreements, fulfillment of our purchasing requirements is our obligation for the entire production life of the platform, with terms generally ranging from five to seven years, and we have no provisions to terminate such contracts.

 

Provisions for anticipated contract losses are recognized at the time they become evident. In certain instances, we may be committed under existing agreements to supply product to our customers at selling prices that are not sufficient to cover the cost to produce such product. In such situations, we record a provision for the estimated future amount of such losses. Such losses are recognized at the time that the loss is probable and reasonably estimable and are recorded at the minimum amount necessary to fulfill our obligations to our customers. We had a provision for

anticipated contract losses of $3.5 million as of December 31, 2008. We had a provision of $0.4 million as of December 31, 2007 and no such provision at December 31, 2006.

 

Goodwill and Intangible Assets — Goodwill represents the excess of acquisition purchase price over the fair value of net assets acquired. We review goodwill and indefinite-lived intangible assets for impairment annually in the second fiscal quarter and whenever events or changes in circumstances indicate the carrying value may not be recoverable in accordance with Statement of Financial Accounting Standard (“SFAS”) No. 142, Goodwill and Intangible Assets. We review indefinite and definite-lived intangible assets in accordance with the provisions of SFAS No. 142 and SFAS No. 144, Accounting for the Impairment or Disposal of Long-Lived Assets. The provisions of SFAS No. 142 require that a two-step impairment test be performed on goodwill. In the first step, we compare the fair value of the reporting unit to the carrying value. Our reporting unit is consistent with the reportable segment identified in Note 11 to our consolidated financial statements contained in this Annual Report on Form 10-K/A for the year ended December 31, 2008. If the fair value of the reporting unit exceeds the carrying value of the net assets assigned to that unit, goodwill is considered not impaired and we are not required to perform further testing. If the carrying value of the net assets assigned to the reporting unit exceeds the fair value of the reporting unit, then we must perform the second step of the impairment test in order to determine the implied fair value of the reporting unit’s goodwill. If the carrying value of a reporting unit’s goodwill exceeds its implied fair value, then we would record an impairment loss equal to the difference. SFAS No. 142 also requires that the fair value of the purchased intangible assets with indefinite lives be estimated and compared to the carrying value. We estimate the fair value of these intangible assets using an income approach. We recognize an impairment loss when the estimated fair value of the intangible asset is less than the carrying value. In this regard, our management considers the following indicators in determining if events or changes in circumstances have occurred indicating that the recoverability of the carrying amount of indefinite-lived and amortizing intangible assets should be assessed: (1) a significant decrease in the market value of an asset; (2) a significant change in the extent or manner in which an asset is used or a significant physical change in an asset; (3) a significant adverse change in legal factors or in the business climate that could affect the value of an asset or an adverse action or assessment by a regulator; (4) an accumulation of costs significantly in excess of the amount originally expected to acquire or construct an asset; and (5) a current period operating or cash flow loss combined with a history of operating or cash flow losses or a projection or forecast that demonstrates continuing losses associated with an asset used for the purpose of producing revenue.

 

Determining the fair value of a reporting unit is judgmental in nature and involves the use of significant estimates and assumptions. These estimates and assumptions include revenue growth rates and operating margins used to calculate projected future cash flows, risk-adjusted discount rates, future economic and market conditions and determination of appropriate market comparables. We base our fair value estimates on assumptions we believe to be reasonable but that are inherently uncertain. The valuation approaches we use include the Income Approach (the Discounted Cash Flow Method) and the Market Approach (the Guideline Company and Transaction Methods). To estimate the fair value of the reporting unit, earnings are emphasized in the Discounted Cash Flow, Guideline Company and the Transaction Methods. In addition, these methods utilize market data in the derivation of a value estimate and are forward-looking in nature. The Discounted Cash Flow Method utilizes a market-derived rate of return to discount anticipated performance, while the Guideline Company Method and the Transaction Method incorporate multiples that are based on the market’s assessment of future performance. Actual future results may differ materially from those estimates.

 

Intangible Assets — Indefinite-Lived

 

Basis for Accounting Treatment — Our indefinite-lived intangible assets consist of customer relationships acquired in the 2005 acquisitions of Mayflower and Monona. We have accounted for these customer relationships as indefinite-lived intangible assets, which we believe is appropriate based upon the following circumstances and conditions under which we operate:

 

Sourcing, Barriers to Entry and Competitor Risks — The customer sourcing decision for the Mayflower and Monona businesses is heavily predicated on price, quality, delivery and the overall customer relationship. Absent a significant change in any or all of these factors, it is unlikely that a customer would source production to an alternate supplier. In addition, the factors listed below impose a high barrier for new competitors to enter into this industry.

Historical experience indicates that Mayflower and Monona have not lost any primary customers and/or relationships due to these factors and such loss is not anticipated in the foreseeable future for the following reasons:

 

 

These costs and risks are the primary prohibiting factors which preclude our customers from sourcing their business elsewhere at any given time.

 

Duration and Strength of Existing Customer Relationships / Concentrations of Revenue — Mayflower and Monona have long-standing relationships with their existing customers and have experienced de minimis historical attrition. These relationships have endured over time and, accordingly, an assumption of prospective attrition is inconsistent with this historical experience and management’s expectations. Both Mayflower and Monona have a limited customer base, consisting of three primary customers, that has existed for many years, and we had pre-existing long-standing relationships with the same primary customers prior to the acquisitions of Mayflower and Monona, which in most cases have exceeded a period of 40 years. We believe the addition of Mayflower and Monona strengthened our existing customer relationships with such customers. Specifically:

 

Mayflower and Monona’s relationships with their customers’ key decision-making personnel are mature and stable.

 

 

The top three customers of Mayflower and Monona have been established customers for a substantial period of time.

 

 

Valuation Methodology — For valuation purposes at the date of acquisition, the income approach using the discounted cash flow method was employed for the purpose of evaluating the Mayflower and Monona customer relationship intangible assets. Under this approach, we determined that the fair value of the Mayflower and Monona

customer relationship intangible assets at their dates of acquisition was $45.9 million and $28.9 million, respectively. As of December 31, 2008, the fair value of the Mayflower and Monona customer relationship intangible assets was $0.0 and $26.0 million, respectively. See Note 9 to our consolidated financial statements in Item 8 in this Annual Report on Form 10-K/A for further information on our goodwill and intangible asset impairment.

 

Significant assumptions used in the valuation and determination of an indefinite useful life for these customer relationship intangible assets included the following:

 

 

Intangible Assets — Definite-Lived

 

We review definite-lived intangible assets in accordance with the provisions of SFAS No. 144, Accounting for the Impairment or Disposal of Long-Lived Assets. If events or circumstances change, a determination is made by management, in accordance with SFAS No. 144 to ascertain whether property and equipment and certain definite-lived intangibles have been impaired based on the sum of expected future undiscounted cash flows from operating activities. If the estimated undiscounted cash flows are less than the carrying amount of such assets, we will recognize an impairment loss in an amount necessary to write down the assets to fair value as determined from expected future discounted cash flows.

 

Goodwill and Intangible Asset Impairment

 

Our annual goodwill and intangible asset analysis was performed during the second quarter of fiscal 2008 and did not result in an impairment charge. However, in response to the substantial changes in the global environment and the decline in our stock price during the fourth quarter of 2008, we determined that it was necessary to perform additional impairment testing. In connection with these tests, we determined that the fair value of our reporting unit was less than the carrying value of our net assets and resulted in the recording of a full impairment of goodwill of approximately $144.7 million.

 

In addition, we determined the fair value of our indefinite-lived customer relationships and, because the carrying value of those assets exceeded their fair value, we recorded an impairment of approximately $48.8 million, which includes $45.9 million relating to Mayflower and $2.9 million relating to Monona.

 

We performed a recoverability test of our definite-lived customer relationships and, because the carrying value of those assets exceeded their fair value, we recorded an impairment of approximately $14.0 million, which includes $4.4 million relating to C.I.E.B. and $9.6 million relating to PEKM.

 

For further information on our goodwill and intangible asset impairment, see Note 9 to our consolidated financial statements in Item 8 in this Annual Report on Form 10-K/A.

 

Accounting for Income Taxes — As part of the process of preparing our consolidated financial statements, we are required to estimate our income taxes in each of the jurisdictions in which we operate. In addition, tax expense includes the impact of differing treatment of items for tax and accounting purposes which result in deferred tax assets and liabilities which are included in our consolidated balance sheet. To the extent that recovery of deferred tax assets is not likely, we must establish a valuation allowance. Significant judgment is required in determining our provision for income taxes, deferred tax assets and liabilities and any valuation allowance recorded against our net

deferred tax assets. As of December 31, 2008, we determined that a valuation allowance of $44.6 million was needed against our deferred tax assets. This amount represents our total net deferred assets. Because we have a cumulative three-year loss, as defined by SFAS 109, we believe that it is appropriate to establish a valuation allowance equal to the total net deferred tax assets. In the event that our actual results differ from our estimates or we adjust these estimates in future periods, the effects of these adjustments could materially impact our financial position and results of operations. As of December 31, 2008, our net deferred tax position is zero in our financials. The net deferred tax liability as of December 31, 2007 was $14.1 million. We adopted Financial Accounting Standards Board (“FASB”) Interpretation No. 48, Accounting for Uncertainty in Income Taxes — an Interpretation of FASB Statement No. 109, (“FIN 48”) in the first quarter 2007. The adoption of this interpretation changed the manner in which we evaluate recognition and measurement of uncertain tax positions.

 

Warranties — We are subjected to warranty claims for products that fail to perform as expected due to design or manufacturing deficiencies. Customers continue to require their outside suppliers to guarantee or warrant their products and bear the cost of repair or replacement of such products. Depending on the terms under which we supplied products to our customers, a customer may hold us responsible for some or all of the repair or replacement costs of defective products, when the product supplied did not perform as represented. Our policy is to reserve for estimated future customer warranty costs based on historical trends and current economic factors. The amount of such estimates for warranty provisions was approximately $3.7 million, $4.0 million and $5.2 million at December 31, 2008, 2007 and 2006, respectively.

 

Pension and Other Post-Retirement Benefit Plans — We sponsor pension and other post-retirement benefit plans that cover certain hourly and salaried employees in the United States and United Kingdom. Our policy is to make annual contributions to the plans to fund the normal cost as required by local regulations. In addition, we have another post-retirement benefit plan for certain U.S. operations, retirees and their dependents.

 

Our Assumptions

 

The determination of pension and other post-retirement benefit plan obligations and related expenses requires the use of assumptions to estimate the amount of the benefits that employees earn while working, as well as the present value of those benefits. Our assumptions are determined based on current market conditions, historical information and consultation with and input from our actuaries. Due to the significant management judgment involved, our assumptions could have a material impact on the measurement of our pension and other post-retirement benefit expenses and obligations.

 

Significant assumptions used to measure our annual pension and other post-retirement benefit expenses include:

 

 

Discount Rate — The discount rate represents the interest rate that should be used to determine the present value of future cash flows currently expected to be required to settle the pension and other post-retirement benefit obligations. In estimating this rate, we consider rates of return on high quality fixed-income investments included in various published bond indexes. We consider the Citigroup Pension Discount Curve and the Barclay’s Capital Non-Gilt AA Rated Sterling Bond Index in the determination of the appropriate discount rate assumptions. The weighted average rate we used to measure our pension obligation as of December 31, 2008 was 6.1% for the U.S. and 6.5% for the non-U.S. pension plans.

 

Expected Long-Term Rate of Return — The expected return on pension plan assets is based on our historical experience, our pension plan investment strategy and our expectations for long-term rates of return. Our pension plan investment strategy is reviewed annually and is established based upon plan liabilities, an evaluation of market conditions, tolerance for risk and cash requirements for benefit payments. We use a third-party advisor to assist us in determining our investment allocation and modeling our long-term rate of return assumptions. For 2008 and 2007,

we assumed an expected long-term rate of return on plan assets of 7.5% for the U.S. pension plans and 6.0% for the non-U.S. pension plans.

 

Changes in the discount rate and expected long-term rate of return on plan assets within the range indicated below would have had the following impact on 2008 pension and other post-retirement benefits results (in thousands):

 

 

Health Care Cost Trend Rates — The health care cost trend rates represent the annual rates of change in the cost of health care benefits based on estimates of health care inflation, changes in health care utilization or delivery patterns, technological advances and changes in the health status of the plan participants. For measurement purposes, a 10.0% annual rate of increase in the per capita cost of covered health care benefits was assumed for 2008 and 2007. The rate was assumed to decrease gradually to 6.0% through 2017 and remain constant thereafter. Assumed health care cost trend rates can have a significant effect on the amounts reported for other post-retirement benefit plans.

 

Differences in the ultimate health care cost trend rates within the range indicated below would have had the following impact on 2008 other post-retirement benefit results (in thousands):

 

 

Recently Issued Accounting Pronouncements

 

See Note 2 to our consolidated financial statements in Item 8 in this Annual Report on Form 10-K/A for a full description of recently issued and/or adopted accounting pronouncements.

Results of Operations

 

The table below sets forth certain operating data expressed as a percentage of revenues for the periods indicated:

 

 

Year Ended December 31, 2008 Compared to Year Ended December 31, 2007

 

Revenues.  Revenues increased $66.7 million, or 9.6%, to $763.5 million for the year ended December 31, 2008 from $696.8 million for the year ended December 31, 2007. This change resulted primarily from:

 

 

Gross Profit.  Gross profit decreased $2.4 million, or 3.2%, to $74.2 million for the year ended December 31, 2008 from $76.6 million for the year ended December 31, 2007. As a percentage of revenues, gross profit decreased to 9.7% for the year ended December 31, 2008 from 11.0% for the year ended December 31, 2007. This decrease resulted primarily from increases in our raw material costs and lower gross profit margins from our PEKM and Gage acquisitions.

 

Selling, General and Administrative Expenses.  Selling, general and administrative expenses increased $7.3 million, or 13.1%, to $62.8 million for the year ended December 31, 2008 from $55.5 million for the year ended December 31, 2007. The increase resulted primarily from higher wages and benefits, incentive compensation, increased occupancy expense as well as increased stock compensation expense as compared to the prior year.

Amortization Expense.  Amortization expense increased to approximately $1.4 million for the year ended December 31, 2008 from approximately $0.9 million for the year ended December 31, 2007. This increase was primarily the result of the establishment of definite-lived intangible assets for our PEKM acquisition.

 

Gain on Sale of Long-Lived Assets.  We sold the land and building of our Seattle, Washington facility, with a carrying value of approximately $1.2 million, for $7.3 million and recognized a gain on the sale of long-lived assets of approximately $6.1 million for the year ended December 31, 2008.

 

Goodwill and Intangible Asset Impairment.  During the fourth quarter of 2008, we determined that the significant declines in economic and industry conditions and the decline in our stock price were impairment indicators. As a result, we recorded impairments of approximately $144.7 million of goodwill and $62.8 million of intangible assets related to our customer relationships.

 

Restructuring Charges.  In 2007, we approved the closure of our Seattle, Washington facility. In connection with the closure we incurred restructuring charges of approximately $1.4 million during the year ended December 31, 2007.

 

Other Expense (Income).  We use forward exchange contracts to hedge foreign currency transaction exposures related primarily to our United Kingdom operations. We estimate our projected revenues and purchases in certain foreign currencies or locations and will hedge a portion or all of the anticipated long or short position. We have designated that future forward contracts will be accounted for as cash flow hedges. All previously existing forward foreign exchange contracts have been marked-to-market and the fair value of contracts recorded in the consolidated balance sheets with the offsetting non-cash gain or loss recorded in our consolidated statements of operations. The $13.9 million expense for the year ended December 31, 2008 and the $9.4 million expense for the year ended December 31, 2007 are primarily related to the noncash change in value of the forward exchange contracts in existence at the end of each period.

 

Interest Expense.  Interest expense increased $1.3 million to $15.4 million for the year ended December 31, 2008 from $14.1 million for the year ended December 31, 2007. This increase was primarily the result of higher average outstanding debt balances.

 

Loss on Early Extinguishment of Debt.  In June 2007, we repaid our foreign denominated term loan in full. In connection with this loan repayment, we wrote off a proportionate amount of our debt financing costs of approximately $0.1 million.

 

(Benefit) Provision for Income Taxes.  Our effective tax rate during the year ended December 31, 2008 was 6.3% compared to 32.8% for 2007. Benefit for income taxes increased $12.4 million to a benefit of $14.0 million for the year ended December 31, 2008, compared to an income tax benefit of $1.6 million for the year ended December 31, 2007. The decrease in effective rate year over year can be primarily attributed to the impairment of nondeductible goodwill, the establishment of the valuation allowance for deferred tax assets and international statutory tax rates.

 

Net Loss.  Net loss increased $203.5 million to a loss of $206.8 million for the year ended December 31, 2008, compared to net loss of $3.3 million for the year ended December 31, 2007, primarily as a result of the factors discussed above.

 

Year Ended December 31, 2007 Compared to Year Ended December 31, 2006

 

Revenues.  Revenues decreased $222.0 million, or 24.2%, to $696.8 million for the year ended December 31, 2007 from $918.8 million for the year ended December 31, 2006. This decrease resulted primarily from:

 

 

The decrease was partially offset by:

 

 

Gross Profit.  Gross profit decreased $73.2 million, or 48.9%, to $76.6 million for the year ended December 31, 2007 from $149.8 million for the year ended December 31, 2006. As a percentage of revenues, gross profit decreased to 11.0% for the year ended December 31, 2007 from 16.3% for the year ended December 31, 2006. This decrease resulted primarily from our inability to reduce fixed costs proportionate to the decrease in revenues from the prior period. We continued to seek material cost reductions, labor efficiencies and general operating cost reductions to generate additional profits during the year ended December 31, 2007.

 

Selling, General and Administrative Expenses.  Selling, general and administrative expenses increased $3.5 million, or 6.8%, to $55.5 million for the year ended December 31, 2007 from $52.0 million for the year ended December 31, 2006. The increase resulted primarily from higher wages and benefits, travel expenses, currency fluctuations as well as increased stock compensation expense, partially offset by reduced incentive compensation expense as compared to the prior year.

 

Amortization Expense.  Amortization expense increased to approximately $0.9 million for the year ended December 31, 2007 from approximately $0.4 million for the year ended December 31, 2006. This increase was primarily the result of breakout of definite-lived intangible assets for the C.I.E.B. and PEKM acquisitions.

 

Restructuring Charges.  In 2007, we approved the closure of our Seattle, Washington facility. In connection with the closure we incurred restructuring charges of approximately $1.4 million during the year ended December 31, 2007.

 

Other Expense (Income).  We use forward exchange contracts to hedge foreign currency transaction exposures of our United Kingdom operations. We estimate our projected revenues in certain foreign currencies or locations and will hedge a portion of the anticipated long or short position. We have not designated any of our forward exchange contracts as cash flow hedges, electing instead to mark-to-market the contracts and record the fair value of the contracts on our consolidated balance sheets, with the offsetting noncash gain or loss recorded in our consolidated statement of operations. The $9.4 million expense for the year ended December 31, 2007 and the $3.5 million gain for the year ended December 31, 2006 are primarily related to the noncash change in value of the forward exchange contracts in existence at the end of each period.

 

Interest Expense.  Interest expense decreased $0.7 million to $14.1 million for the year ended December 31, 2007 from $14.8 million for the year ended December 31, 2006. This decrease was primarily the result of lower average outstanding debt balances.

 

Loss on Early Extinguishment of Debt.  In June 2007, we repaid our foreign denominated term loan in full. In connection with this loan repayment, we wrote off a proportionate amount of our debt financing costs of approximately $0.1 million. In connection with our June 30, 2006 repayment of approximately $25.0 million of our U.S. Dollar denominated term loan, we wrote off a proportionate amount of our debt financing costs of approximately $0.3 million.

 

(Benefit) Provision for Income Taxes.  Our effective tax rate during the year ended December 31, 2007 was 32.8% compared to 32.3% for 2006. Provision for income taxes decreased $29.3 million to a benefit of $1.6 million for the year ended December 31, 2007, compared to an income tax provision of $27.7 million for the year ended December 31, 2006. The increase in effective rate year over year can be primarily attributed to the decrease in income before taxes and release of certain tax reserves.

Net (Loss) Income.  Net income decreased $61.4 million to a loss of $3.3 million for the year ended December 31, 2007, compared to net income of $58.1 million for the year ended December 31, 2006, primarily as a result of the factors discussed above.

 

Liquidity and Capital Resources

 

Cash Flows

 

For the year ended December 31, 2008, cash provided by operations was approximately $9.7 million, compared to $47.6 million in the year ended December 31, 2007. This decrease was primarily the result of the change in accounts receivable during the year. Cash provided by operations in the year ended December 31, 2006 was $36.9 million.

 

Net cash used in investing activities was approximately $10.1 million for the year ended December 31, 2008 compared to $53.3 million in the year ended December 31, 2007 and $27.6 million in the year ended December 31, 2006. The amounts used in the year ended December 31, 2008, primarily reflect capital expenditure purchases related to upgrades, replacements or new equipment, machinery and tooling, which was offset by the gain on sale of long-lived assets. The amounts used in the year ended December 31, 2007 primarily reflect capital expenditure purchases related to upgrades, replacements or new equipment, machinery and tooling as well as the acquisitions of PEKM, Gage and SBI. The amounts used in the year December 31, 2006 primarily reflect capital expenditure purchases and the acquisition of C.I.E.B. Capital expenditures for 2009 are expected to be approximately $9.7 million.

 

Net cash provided by financing activities totaled approximately $5.0 million for the year ended December 31, 2008, compared to net cash used of $2.4 million in the year ended December 31, 2007 and $28.0 million in the year ended December 31, 2006. The net cash provided by financing activities in the year ended December 31, 2008 was primarily related to borrowings on our prior revolving credit facility to fund ongoing operations. The net cash used in financing activities in the year ended December 31, 2007 was primarily related to the repayment of our foreign denominated term loan. The net cash used in financing activities for December 31, 2006, was primarily related to our repayment of our U.S. dollar denominated term loan.

 

Debt and Credit Facilities

 

As of December 31, 2008, we had an aggregate of $164.9 million of outstanding indebtedness excluding $1.8 million of outstanding letters of credit under various financing arrangements and an additional $33.4 million of borrowing capacity under our prior revolving credit facility. The indebtedness consisted of the following:

 

 

Prior Senior Credit Agreement

 

In August 2004, in connection with our initial public offering, we entered into the prior senior credit agreement (the “prior senior credit agreement”), which provided for a revolving credit facility (the “prior revolving credit facility”) and a term loan. On January 7, 2009, the prior senior credit agreement was replaced with the Loan and Security Agreement (described below under “— Loan and Security Agreement”).

 

As of December 31, 2008, we had $14.8 million of the borrowings under our prior revolving credit facility, all of which were denominated in U.S. dollars, and no term loan borrowings. As of December 31, 2008, these borrowings bore interest at a rate of 7.5% per annum.

 

On March 11, 2008, we entered into the Eleventh Amendment to the prior senior credit agreement (the “Eleventh Amendment”). Pursuant to the terms of the Eleventh Amendment, the banks party thereto consented to various amendments to the prior senior credit agreement, including but not limited to: (i) amendments to the fixed charge ratio and the leverage ratio to provide us increased flexibility in the near future; (ii) an amendment to the

applicable margin pricing grid to include increased rates for prime rate and LIBOR borrowings when our leverage ratio is equal to or greater than 4.0x; (iii) a reduction in the size of the revolving credit facility from $100 million to $50 million, subject to increases to $75 million and then to $100 million upon satisfaction of certain conditions, including meeting certain financial covenant thresholds; (iv) increases in certain baskets in the indebtedness, asset disposition, investment and lien covenants contained in the senior credit agreement; and (v) an amendment to permit proposed future tax planning.

 

The prior revolving credit facility was available until January 31, 2010. Based on the provisions of EITF 98-14 and the provisions of EITF Issue No. 96-19, Debtor’s Accounting for a Modification or Exchange of Debt Instruments, approximately $3.9 million third party fees relating to the prior senior credit agreement and 8.0% senior notes due 2013 were capitalized at December 31, 2008 and were being amortized over the life of the prior senior credit facility.

 

Under the terms of our prior senior credit facility, as amended by the Eleventh Amendment, availability under the revolving credit facility was subject to the lesser of (i) a borrowing base equal to the sum of (a) 80% of eligible accounts receivable plus (b) 50% of eligible inventory; or (ii) $50.0 million; provided, that the $50.0 million cap was subject to increase to $75.0 million and then $100.0 million upon satisfaction of certain financial covenant tests. Borrowings under the prior senior credit agreement bore interest at a floating rate, which was either the prime rate or LIBOR plus the applicable margin to the prime rate and LIBOR borrowings based on our leverage ratio. The prior senior credit agreement contained various financial covenants, including, a limitation on the amount of capital expenditures of not more than $40.0 million in any fiscal year, a minimum ratio of EBITDA to cash interest expense, a fixed charge coverage ratio and a maximum ratio of total indebtedness to EBITDA. For the twelve months ended December 31, 2008, we were required to comply with a minimum EBITDA to cash interest expense ratio of 2.50 to 1.00, a minimum fixed charge coverage ratio of 0.90 to 1.00 and a maximum ratio of total indebtedness to EBITDA of 4.75 to 1.00.

 

Because we repaid all borrowings under the prior senior credit agreement and replaced the prior senior credit agreement with the Loan and Security Agreement on January 7, 2009, we did not need to test the covenants in the prior senior credit agreement through the quarter ended December 31, 2008 and will not need to comply with these covenants in the current quarter or in future quarters.

 

The prior senior credit agreement also contained customary restrictive covenants and customary events of default.

 

Loan and Security Agreement

 

On January 7, 2009, we and certain of our direct and indirect U.S. subsidiaries, as borrowers (the “domestic borrowers”), entered into a Loan and Security Agreement (the “Loan and Security Agreement”) with Bank of America, N.A., as agent and lender. In addition to the domestic borrowers, the Loan and Security Agreement contemplates the addition of certain of our direct and indirect UK subsidiaries as borrowers under the Loan and Security Agreement (the “UK borrowers” and together with the domestic borrowers, the “borrowers”). Set forth below is a description of the material terms and conditions of the Loan and Security Agreement.

 

The Loan and Security Agreement provides for a three-year asset-based revolving credit facility (the “new revolving credit facility”) in an aggregate principal amount of up to $47.5 million, all of which will be available in the form of loans denominated in U.S. dollars to the domestic borrowers, subject to the borrowing base limitations described below. Up to an aggregate of $10.0 million will be available to the domestic borrowers for the issuance of letters of credit, which reduce availability under the new revolving credit facility.

 

On January 7, 2009, we borrowed $26.8 million under the new revolving credit facility and used that amount to repay in full our borrowings under our prior senior credit agreement and to pay fees and expenses related to the Loan and Security Agreement. We intend to use the new revolving credit facility to fund ongoing operating and working capital requirements.

 

On March 12, 2009, we entered into a first amendment to the Loan and Security Agreement (the “First Amendment”). Pursuant to the terms of the First Amendment, the lenders consented to changing the thresholds in the minimum operating performance covenant to provide us with financial covenant relief in 2009. In addition, the

First Amendment provided for (i) an increase in the applicable margin for interest rates on amounts borrowed by the domestic borrowers of 1.50%, (ii) a limitation on permitted capital expenditures in 2009 and (iii) a temporary decrease in domestic availability until such time as the domestic borrowers demonstrate a fixed charge coverage ratio of at least 1.0:1.0 for any fiscal quarter ending on or after March 31, 2010.

 

The aggregate amount of loans permitted to be made to the domestic borrowers under the new revolving credit facility may not exceed a borrowing base consisting of the lesser of: (a) $47.5 million, minus domestic letters of credit, and (b) the sum of eligible accounts receivable and eligible inventory of the domestic borrowers, minus certain domestic availability reserves. Borrowings by the domestic borrowers under the Loan and Security Agreement are denominated in U.S. dollars and bear interest at a rate per annum which, at the option of any domestic borrower, can be either:

 

 

The applicable margin will be reduced by 0.25% if, at the end of any fiscal quarter ending on or after March 31, 2010, (i) the Company certifies that the average domestic availability for each day during that quarter was greater than $20.0 million and (ii) the fixed charge coverage ratio is at least 1.0:1.0.

 

The domestic borrowers’ obligations under the Loan and Security Agreement are secured by a first-priority lien (subject to certain permitted liens) on substantially all of the tangible and intangible assets of the domestic borrowers, as well as 100% of the capital stock of the domestic subsidiaries of each domestic borrower and 65% of the capital stock of each foreign subsidiary directly owned by a domestic borrower. Each of CVG and each other domestic borrower is jointly and severally liable for the obligations under the Loan and Security Agreement and unconditionally guarantees the prompt payment and performance thereof.

 

The Loan and Security Agreement, as amended, contains the following financial covenants:

 

(1) minimum operating performance, which requires us to maintain cumulative EBITDA, as defined in the Loan and Security Agreement, calculated monthly starting on April 30, 2009, for each of the following periods as of the end of each fiscal month specified below:

 

 

(2) a limitation on the amount of capital expenditures of not more than $4.3 million for the period from January 1, 2009 through June 30, 2009, not more than $9.7 million for the fiscal year ending December 31, 2009; and

 

(3) a minimum fixed charge coverage ratio of 1:0:1.0 as of the end of any fiscal quarter commencing with the fiscal quarter ending March 31, 2010.

 

In addition, the domestic borrowers are obligated to maintain availability under the domestic borrowing base of at least $11.5 million until such time as the domestic borrowers demonstrate a fixed charge coverage ratio of at least 1.0:1.0 for any fiscal quarter ending March 31, 2010 or thereafter, at which time the domestic borrowers will be required to maintain availability under the domestic borrowing base of at least $7.5 million at all times.

The Loan and Security Agreement also contains other customary restrictive covenants, including, without limitation: limitations on the ability of the borrowers and their subsidiaries to incur additional debt and guarantees; grant liens on assets; pay dividends or make other distributions; make investments or acquisitions; dispose of assets; make payments on certain indebtedness; merge, combine or liquidate with any other person; amend organizational documents; file consolidated tax returns with entities other than other borrowers or their subsidiaries; make material changes in accounting treatment or reporting practices; enter into restrictive agreements; enter into hedging agreements; engage in transactions with affiliates; enter into certain employee benefit plans; and amend subordinated debt or the indenture governing the 8% senior notes due 2013. In addition, the Loan and Security Agreement contains customary reporting and other affirmative covenants.

 

The Loan and Security Agreement contains customary events of default, including, without limitation: nonpayment of obligations under the Loan and Security Agreement when due; material inaccuracy of representations and warranties; violation of covenants in the Loan and Security Agreement and certain other documents executed in connection therewith; breach or default of agreements related to debt in excess of $5.0 million that could result in acceleration of that debt; revocation or attempted revocation of guarantees, denial of the validity or enforceability of the loan documents or failure of the loan documents to be in full force and effect; certain judgments in excess of $2.0 million; the inability of an obligor to conduct any material part of its business due to governmental intervention, loss of any material license, permit, lease or agreement necessary to the business; cessation of an obligor’s business for a material period of time; impairment of collateral through condemnation proceedings; certain events of bankruptcy or insolvency; certain ERISA events; and a change in control of CVG.

 

The Loan and Security Agreement requires us to make mandatory prepayments with the proceeds of certain asset dispositions and upon the receipt of insurance or condemnation proceeds to the extent we do not use the proceeds for the purchase of satisfactory replacement assets.

 

8% Senior Notes due 2013

 

The 8.0% senior notes due 2013 are senior unsecured obligations and rank pari passu in right of payment to all of our existing and future senior indebtedness and are effectively subordinated to our existing and future secured obligations. The 8.0% senior notes due 2013 are guaranteed by all of our domestic subsidiaries.

 

The indenture governing the 8.0% senior notes due 2013 contain covenants that limit, among other things, additional indebtedness, issuance of preferred stock, dividends, repurchases of capital stock or subordinated indebtedness, investments, liens, restrictions on the ability of our subsidiaries to pay dividends to us, sales of assets, sale/leaseback transactions, mergers and transactions with affiliates. Upon a change of control, each holder shall have the right to require that we purchase such holder’s securities at a purchase price in cash equal to 101% of the principal amount thereof plus accrued and unpaid interest to the date of repurchase. The indenture governing the 8.0% senior notes due 2013 also contains customary events of default.

 

We continue to operate in a challenging economic environment, and our ability to comply with the new covenants in the Loan and Security Agreement may be affected in the future by economic or business conditions beyond our control. Based on our current forecast, we believe that we will be able to maintain compliance with the minimum operating performance covenant and other covenants in the Loan and Security Agreement for at least the next 12 months; however, no assurances can be given that we will be able to comply. We base our forecasts on historical experience, industry forecasts and various other assumptions that we believe are reasonable under the circumstances. If actual revenue is less than our current forecast by a substantial margin, or if we do not realize a significant portion of our planned cost savings, we could violate our financial covenants. If we do not comply with the financial and other covenants in the Loan and Security Agreement, and we are unable to obtain necessary waivers or amendments from the lender, we would be precluded from borrowing under the Loan and Security Agreement, which would have a material adverse effect on our business, financial condition and liquidity. If we are unable to borrow under the Loan and Security Agreement, we will need to meet our capital requirements using other sources. Due to current economic conditions, alternative sources of liquidity may not be available on acceptable terms if at all. In addition, if we do not comply with the financial and other covenants in the Loan and Security Agreement, the lender could declare an event of default under the Loan and Security Agreement, and our indebtedness thereunder could be declared immediately due and payable, which would also result in an event of

default under the 8% senior notes due 2013. Any of these events would have a material adverse effect on our business, financial condition and liquidity.

 

We believe that cash flow from operating activities together with available borrowings under the Loan and Security Agreement will be sufficient to fund currently anticipated working capital, planned capital spending and debt service requirements for at least the next 12 months. No assurance can be given, however, that this will be the case.

 

Contractual Obligations and Commercial Commitments

 

The following table reflects our contractual obligations as of December 31, 2008:

 

 

The FIN 48 obligations shown in the table above represent uncertain tax positions related to temporary differences. The years for which the temporary differences related to the uncertain tax positions will reverse have been estimated in scheduling the obligations within the table. In addition to the Interpretation 48 obligations in the table above, approximately $1.6 million of unrecognized tax benefits have been recorded as liabilities in accordance with Interpretation 48, and we are uncertain as to if or when such amounts may be settled. Related to the unrecognized tax benefits not included in the table above, the Company has also recorded a liability for potential penalties of $29 thousand and interest of $345 thousand.

 

Since December 31, 2008, there have been no material changes outside the ordinary course of business to our contractual obligations as set forth above, other than replacing the prior senior credit agreement with the Loan and Security Agreement.

 

In addition to the obligations noted above, we have obligations reported as other long-term liabilities that consist primarily of foreign currency forward contracts, loss contracts and other items. We also enter into agreements with our customers at the beginning of a given platform’s life to supply products for the entire life of that vehicle platform, which is typically five to seven years. These agreements generally provide for the supply of a customer’s production requirements for a particular platform, rather than for the purchase of a specific quantity of products. Accordingly, our obligations under these agreements are not reflected in the contractual obligations table above.

 

As of December 31, 2008, we were not party to significant purchase obligations for goods or services.

 

Off-Balance Sheet Arrangements

 

We use standby letters of credit to guarantee our performance under various contracts and arrangements, principally in connection with our workers’ compensation liabilities and for leases on equipment and facilities. These letter of credit contracts are usually extended on a year-to-year basis. As of December 31, 2008, we had outstanding letters of credit of $1.8 million. We do not believe that these letters of credit will be required to be drawn.

 

We currently have no non-consolidated special purpose entity arrangements.

 

Interest Rate Risk

 

We are exposed to various market risks, including changes in foreign currency exchange rates and interest rates. Market risk is the potential loss arising from adverse changes in market rates and prices, such as foreign currency exchange and interest rates. We do not enter into derivatives or other financial instruments for trading or speculative purposes. We do enter into financial instruments, from time to time, to manage and reduce the impact of changes in foreign currency exchange rates and interest rates and to hedge a portion of future anticipated currency transactions. The counterparties are primarily major financial institutions.

 

We manage our interest rate risk by balancing the amount of our fixed rate and variable rate debt. For fixed rate debt, interest rate changes affect the fair market value of such debt but do not impact earnings or cash flows. Conversely for variable rate debt, interest rate changes generally do not affect the fair market value of such debt, but do impact future earnings and cash flows, assuming other factors are held constant. Approximately $14.8 million and $9.5 million of our debt was variable rate debt at December 31, 2008 and 2007, respectively. Holding other variables constant (such as foreign exchange rates and debt levels), a one percentage point change in interest rates would be expected to have an impact on pre-tax earnings and cash flows for the next year of approximately $0.1 million and $0.1 million, respectively. The estimated fair value of our 8% senior notes at December 31, 2008, per quoted market sources, was approximately $72.0 million with a carrying value of approximately $150.0 million.

 

Foreign Currency Risk

 

Foreign currency risk is the risk that we will incur economic losses due to adverse changes in foreign currency exchange rates. We use forward exchange contracts to hedge certain of the foreign currency transaction exposures primarily related to our United Kingdom operations. We estimate our projected revenues and purchases in certain foreign currencies or locations, and will hedge a portion or all of the anticipated long or short position. The contracts typically run from three months up to three years. All previously existing forward foreign exchange contracts have been marked-to-market and the fair value of contracts recorded in the consolidated balance sheets with the offsetting non-cash gain or loss recorded in our consolidated statements of operations. We have designated that future forward contracts will be accounted for as cash flow hedges in accordance with SFAS No. 133, Accounting for Derivative Instruments and Hedging Activities. We do not hold or issue foreign exchange options or forward contracts for trading purposes.

 

Outstanding foreign currency forward exchange contracts at December 31, 2008 are more fully described in the notes to our consolidated financial statements in Item 8 of this Annual Report on Form 10-K/A. The fair value of our contracts at December 31, 2008 amounted to a liability of $15.3 million, which includes $10.1 million in accrued liabilities and $5.2 million in other long-term liabilities in our consolidated balance sheets. The fair value of our contracts at December 31, 2007 amounted to a $1.5 million liability, which is reflected in other long-term liabilities in our consolidated balance sheets. None of these contracts have been designated as cash flow hedges; thus, the change in fair value at each reporting date is reflected as a noncash charge (income) in our consolidated statement of operations.

 

Our primary exposures to foreign currency exchange fluctuations are pound sterling, Eurodollar and Japanese yen. At December 31, 2008, the potential reduction in earnings from a hypothetical instantaneous 10% adverse change in quoted foreign currency spot rates applied to foreign currency sensitive instruments is limited by the assumption that all of the foreign currencies to which we are exposed would simultaneously decrease by 10% because such synchronized changes are unlikely to occur. The effects of the forward exchange contracts have been included in the above analysis; however, the sensitivity model does not include the inherent risks associated with the anticipated future transactions denominated in foreign currency.

 

Foreign Currency Transactions

 

A portion of our revenues during the year ended December 31, 2008 were derived from manufacturing operations outside of the United States. The results of operations and the financial position of our operations in these other countries are primarily measured in their respective currency and translated into U.S. dollars. A portion of the

expenses generated in these countries is in currencies different from which revenue is generated. As discussed above, from time to time, we enter into forward exchange contracts to mitigate a portion of this currency risk. The reported income of these operations will be higher or lower depending on a weakening or strengthening of the U.S. dollar against the respective foreign currency.

 

A portion of our assets at December 31, 2008 are based in our foreign operations and are translated into U.S. dollars at foreign currency exchange rates in effect as of the end of each period, with the effect of such translation reflected as a separate component of stockholders’ investment. Accordingly, our stockholders’ investment will fluctuate depending upon the weakening or strengthening of the U.S. dollar against the respective foreign currency.

 

Effects of Inflation

 

Inflation potentially affects us in two principal ways. First, a portion of our debt is tied to prevailing short-term interest rates that may change as a result of inflation rates, translating into changes in interest expense. Second, general inflation can impact material purchases, labor and other costs. In many cases, we have limited ability to pass through inflation-related cost increases due to the competitive nature of the markets that we serve. In the past few years, however, inflation has not been a significant factor.

 

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

Documents Filed as Part of this Annual Report on Form 10-K/A

 

 

To the Board of Directors and Stockholders of

Commercial Vehicle Group, Inc.

 

We have audited the accompanying consolidated balance sheets of Commercial Vehicle Group, Inc. and subsidiaries (the “Company”) as of December 31, 2008 and 2007 and the related consolidated statements of operations, stockholders’ investment, and cash flows for each of the three years in the period ended December 31, 2008. Our audits also included the financial statement schedules listed in the Index to Item 15. These consolidated financial statements and financial statement schedules are the responsibility of the Company’s management. Our responsibility is to express an opinion on the consolidated financial statements and financial statement schedules based on our audits.

 

We conducted our audits in accordance with standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of Commercial Vehicle Group, Inc. and subsidiaries as of December 31, 2008 and 2007 and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2008, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, such financial statement schedules, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

 

As discussed in Note 10 to the consolidated financial statements, effective January 1, 2007, the Company changed the manner in which it accounts for uncertain income tax positions. As discussed in Notes 2 and 15 to the consolidated financial statements, in 2006, the Company changed its method of accounting for defined benefit pension and other post-retirement benefit plans.

 

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of December 31, 2008, based on the criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated March 16, 2009 expressed an unqualified opinion on the Company’s internal control over financial reporting.

 

/s/ Deloitte & Touche LLP

 

Columbus, Ohio

March 16, 2009
(November 20, 2009 as to the effects of the restatements discussed in Notes 8 and 17)